From patchwork Wed Sep 30 12:27:02 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Ivan T. Ivanov" X-Patchwork-Id: 7297481 X-Patchwork-Delegate: agross@codeaurora.org Return-Path: X-Original-To: patchwork-linux-arm-msm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 00533BEEA4 for ; Wed, 30 Sep 2015 12:28:36 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 343F8206BD for ; Wed, 30 Sep 2015 12:28:34 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 17EFA206DC for ; Wed, 30 Sep 2015 12:28:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933104AbbI3M22 (ORCPT ); Wed, 30 Sep 2015 08:28:28 -0400 Received: from mail-wi0-f171.google.com ([209.85.212.171]:36818 "EHLO mail-wi0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932841AbbI3M1s (ORCPT ); Wed, 30 Sep 2015 08:27:48 -0400 Received: by wicgb1 with SMTP id gb1so192786116wic.1 for ; Wed, 30 Sep 2015 05:27:46 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=97bRHVUuJ80XCyNv9FW0wEg5e5Vle/m8JsravvWUMXo=; b=OawiTGXmXep7AADfUZ3YuU19n444I582CF6XTDDsS7mpAAvOaVeK8xFBeaXE7auGzK HTNt8IUYR8bioSMzWv7Zu6/niwC6L2lafNjmW74vnzP4l16TSrpkeyr2E4uwSWOv0mya /uBAPw6t+hbXE5QuluV+AZ/XtYEt5D2ytd99tnt52410CxW1ITS6BK23jQRuKIHRXzul QhXlzYiFvLgjiXItfxk8IGMutiunDxHZJ4i+s9MIpc7ipuwj4MsnFWxWXYcDXDkwybKh 67FqT9S0JaIaV8/jMIToQi0Rtr20ozb4hxTyOcEL6khoOd7Nmc77AJOE2EZnXOUKuJ4T LkeQ== X-Gm-Message-State: ALoCoQkVBttnn3Uy9hMw/MGEWfwGOCti+ZtDB0y2gIoMl1q142NBnt7Z5gHUC93Tu31jMn3eP1vv X-Received: by 10.195.11.40 with SMTP id ef8mr3894805wjd.103.1443616066756; Wed, 30 Sep 2015 05:27:46 -0700 (PDT) Received: from localhost.localdomain ([37.157.136.206]) by smtp.googlemail.com with ESMTPSA id fs2sm493029wib.12.2015.09.30.05.27.45 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 30 Sep 2015 05:27:46 -0700 (PDT) From: "Ivan T. Ivanov" To: Andy Gross Cc: David Brown , Srinivas Kandagatla , Greg Kroah-Hartman , Jiri Slaby , Frank Rowand , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, linux-serial@vger.kernel.org Subject: [PATCH v3 5/6] tty: serial: msm: Add RX DMA support Date: Wed, 30 Sep 2015 15:27:02 +0300 Message-Id: <1443616023-28625-6-git-send-email-ivan.ivanov@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1443616023-28625-1-git-send-email-ivan.ivanov@linaro.org> References: <1443616023-28625-1-git-send-email-ivan.ivanov@linaro.org> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Add receive DMA support for UARTDM type of controllers. Tested on APQ8064, which have UARTDM v1.3 and ADM DMA engine and APQ8016, which have UARTDM v1.4 and BAM DMA engine. Signed-off-by: Ivan T. Ivanov --- .../devicetree/bindings/serial/qcom,msm-uartdm.txt | 3 + drivers/tty/serial/msm_serial.c | 232 ++++++++++++++++++++- drivers/tty/serial/msm_serial.h | 4 + 3 files changed, 236 insertions(+), 3 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt index a600023d9ec1..182777fac9a2 100644 --- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt @@ -29,6 +29,9 @@ Optional properties: - qcom,tx-crci: Identificator for Client Rate Control Interface to be used with TX DMA channel. Required when using DMA for transmission with UARTDM v1.3 and bellow. +- qcom,rx-crci: Identificator for Client Rate Control Interface to be + used with RX DMA channel. Required when using DMA for reception + with UARTDM v1.3 and bellow. Note: Aliases may be defined to ensure the correct ordering of the UARTs. The alias serialN will result in the UART being assigned port N. If any diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 7006d979d9d2..3efb80f511db 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -44,6 +45,7 @@ #define UARTDM_BURST_SIZE 16 /* in bytes */ #define UARTDM_TX_AIGN(x) ((x) & ~0x3) /* valid for > 1p3 */ #define UARTDM_TX_MAX 256 /* in bytes, valid for <= 1p3 */ +#define UARTDM_RX_SIZE (UART_XMIT_SIZE / 4) enum { UARTDM_1P1 = 1, @@ -73,9 +75,11 @@ struct msm_port { unsigned int old_snap_state; bool break_detected; struct msm_dma tx_dma; + struct msm_dma rx_dma; }; static void msm_handle_tx(struct uart_port *port); +static void msm_start_rx_dma(struct msm_port *msm_port); void msm_stop_dma(struct uart_port *port, struct msm_dma *dma) { @@ -114,6 +118,15 @@ static void msm_release_dma(struct msm_port *msm_port) } memset(dma, 0, sizeof(*dma)); + + dma = &msm_port->rx_dma; + if (dma->chan) { + msm_stop_dma(&msm_port->uart, dma); + dma_release_channel(dma->chan); + kfree(dma->virt); + } + + memset(dma, 0, sizeof(*dma)); } static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base) @@ -159,6 +172,54 @@ no_tx: memset(dma, 0, sizeof(*dma)); } +static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base) +{ + struct device *dev = msm_port->uart.dev; + struct dma_slave_config conf; + struct msm_dma *dma; + u32 crci = 0; + int ret; + + dma = &msm_port->rx_dma; + + /* allocate DMA resources, if available */ + dma->chan = dma_request_slave_channel_reason(dev, "rx"); + if (IS_ERR(dma->chan)) + goto no_rx; + + of_property_read_u32(dev->of_node, "qcom,rx-crci", &crci); + + dma->virt = kzalloc(UARTDM_RX_SIZE, GFP_KERNEL); + if (!dma->virt) + goto rel_rx; + + memset(&conf, 0, sizeof(conf)); + conf.direction = DMA_DEV_TO_MEM; + conf.device_fc = true; + conf.src_addr = base + UARTDM_RF; + conf.src_maxburst = UARTDM_BURST_SIZE; + conf.slave_id = crci; + + ret = dmaengine_slave_config(dma->chan, &conf); + if (ret) + goto err; + + dma->dir = DMA_FROM_DEVICE; + + if (msm_port->is_uartdm < UARTDM_1P4) + dma->enable_bit = UARTDM_DMEN_RX_DM_ENABLE; + else + dma->enable_bit = UARTDM_DMEN_RX_BAM_ENABLE; + + return; +err: + kfree(dma->virt); +rel_rx: + dma_release_channel(dma->chan); +no_rx: + memset(dma, 0, sizeof(*dma)); +} + static inline void msm_wait_for_xmitr(struct uart_port *port) { while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) { @@ -306,12 +367,151 @@ unmap: dma_unmap_single(port->dev, dma->phys, count, dma->dir); return ret; } + +static void msm_complete_rx_dma(void *args) +{ + struct msm_port *msm_port = args; + struct uart_port *port = &msm_port->uart; + struct tty_port *tport = &port->state->port; + struct msm_dma *dma = &msm_port->rx_dma; + int count = 0, i, sysrq; + unsigned long flags; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + + /* Already stopped */ + if (!dma->count) + goto done; + + val = msm_read(port, UARTDM_DMEN); + val &= ~dma->enable_bit; + msm_write(port, val, UARTDM_DMEN); + + /* Restore interrupts */ + msm_port->imr |= UART_IMR_RXLEV | UART_IMR_RXSTALE; + msm_write(port, msm_port->imr, UART_IMR); + + if (msm_read(port, UART_SR) & UART_SR_OVERRUN) { + port->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); + } + + count = msm_read(port, UARTDM_RX_TOTAL_SNAP); + + port->icount.rx += count; + + dma->count = 0; + + dma_unmap_single(port->dev, dma->phys, UARTDM_RX_SIZE, dma->dir); + + for (i = 0; i < count; i++) { + char flag = TTY_NORMAL; + + if (msm_port->break_detected && dma->virt[i] == 0) { + port->icount.brk++; + flag = TTY_BREAK; + msm_port->break_detected = false; + if (uart_handle_break(port)) + continue; + } + + if (!(port->read_status_mask & UART_SR_RX_BREAK)) + flag = TTY_NORMAL; + + spin_unlock_irqrestore(&port->lock, flags); + sysrq = uart_handle_sysrq_char(port, dma->virt[i]); + spin_lock_irqsave(&port->lock, flags); + if (!sysrq) + tty_insert_flip_char(tport, dma->virt[i], flag); + } + + msm_start_rx_dma(msm_port); +done: + spin_unlock_irqrestore(&port->lock, flags); + + if (count) + tty_flip_buffer_push(tport); +} + +static void msm_start_rx_dma(struct msm_port *msm_port) +{ + struct msm_dma *dma = &msm_port->rx_dma; + struct uart_port *uart = &msm_port->uart; + u32 val; + int ret; + + if (!dma->chan) + return; + + dma->phys = dma_map_single(uart->dev, dma->virt, + UARTDM_RX_SIZE, dma->dir); + ret = dma_mapping_error(uart->dev, dma->phys); + if (ret) + return; + + dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys, + UARTDM_RX_SIZE, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!dma->desc) + goto unmap; + + dma->desc->callback = msm_complete_rx_dma; + dma->desc->callback_param = msm_port; + + dma->cookie = dmaengine_submit(dma->desc); + ret = dma_submit_error(dma->cookie); + if (ret) + goto unmap; + /* + * Using DMA for FIFO off-load, no need for "Rx FIFO over + * watermark" or "stale" interrupts, disable them + */ + msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE); + + /* + * Well, when DMA is ADM3 engine(implied by <= UARTDM v1.3), + * we need RXSTALE to flush input DMA fifo to memory + */ + if (msm_port->is_uartdm < UARTDM_1P4) + msm_port->imr |= UART_IMR_RXSTALE; + + msm_write(uart, msm_port->imr, UART_IMR); + + dma->count = UARTDM_RX_SIZE; + + dma_async_issue_pending(dma->chan); + + msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR); + msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR); + + val = msm_read(uart, UARTDM_DMEN); + val |= dma->enable_bit; + + if (msm_port->is_uartdm < UARTDM_1P4) + msm_write(uart, val, UARTDM_DMEN); + + msm_write(uart, UARTDM_RX_SIZE, UARTDM_DMRX); + + if (msm_port->is_uartdm > UARTDM_1P3) + msm_write(uart, val, UARTDM_DMEN); + + return; +unmap: + dma_unmap_single(uart->dev, dma->phys, UARTDM_RX_SIZE, dma->dir); +} + static void msm_stop_rx(struct uart_port *port) { struct msm_port *msm_port = UART_TO_MSM(port); + struct msm_dma *dma = &msm_port->rx_dma; msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE); msm_write(port, msm_port->imr, UART_IMR); + + if (dma->chan) + msm_stop_dma(port, dma); } static void msm_enable_ms(struct uart_port *port) @@ -392,6 +592,9 @@ static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr) msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR); msm_write(port, 0xFFFFFF, UARTDM_DMRX); msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR); + + /* Try to use DMA */ + msm_start_rx_dma(msm_port); } static void msm_handle_rx(struct uart_port *port) @@ -558,8 +761,10 @@ static irqreturn_t msm_uart_irq(int irq, void *dev_id) { struct uart_port *port = dev_id; struct msm_port *msm_port = UART_TO_MSM(port); + struct msm_dma *dma = &msm_port->rx_dma; unsigned long flags; unsigned int misr; + u32 val; spin_lock_irqsave(&port->lock, flags); misr = msm_read(port, UART_MISR); @@ -571,10 +776,21 @@ static irqreturn_t msm_uart_irq(int irq, void *dev_id) } if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) { - if (msm_port->is_uartdm) + if (dma->count) { + val = UART_CR_CMD_STALE_EVENT_DISABLE; + msm_write(port, val, UART_CR); + val = UART_CR_CMD_RESET_STALE_INT; + msm_write(port, val, UART_CR); + /* + * Flush DMA input fifo to memory, this will also + * trigger DMA RX completion + */ + dmaengine_terminate_all(dma->chan); + } else if (msm_port->is_uartdm) { msm_handle_rx_dm(port, misr); - else + } else { msm_handle_rx(port); + } } if (misr & UART_IMR_TXLEV) msm_handle_tx(port); @@ -773,8 +989,10 @@ static int msm_startup(struct uart_port *port) data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level; msm_write(port, data, UART_MR1); - if (msm_port->is_uartdm) + if (msm_port->is_uartdm) { msm_request_tx_dma(msm_port, msm_port->uart.mapbase); + msm_request_rx_dma(msm_port, msm_port->uart.mapbase); + } return 0; } @@ -797,11 +1015,16 @@ static void msm_shutdown(struct uart_port *port) static void msm_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { + struct msm_port *msm_port = UART_TO_MSM(port); + struct msm_dma *dma = &msm_port->rx_dma; unsigned long flags; unsigned int baud, mr; spin_lock_irqsave(&port->lock, flags); + if (dma->chan) /* Terminate if any */ + msm_stop_dma(port, dma); + /* calculate and set baud rate */ baud = uart_get_baud_rate(port, termios, old, 300, 115200); baud = msm_set_baud_rate(port, baud); @@ -866,6 +1089,9 @@ static void msm_set_termios(struct uart_port *port, struct ktermios *termios, uart_update_timeout(port, termios->c_cflag, baud); + /* Try to use DMA */ + msm_start_rx_dma(msm_port); + spin_unlock_irqrestore(&port->lock, flags); } diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h index 103ae61b9d06..178645826f16 100644 --- a/drivers/tty/serial/msm_serial.h +++ b/drivers/tty/serial/msm_serial.h @@ -59,6 +59,7 @@ #define UART_CR_CMD_SET_RFR (13 << 4) #define UART_CR_CMD_RESET_RFR (14 << 4) #define UART_CR_CMD_PROTECTION_EN (16 << 4) +#define UART_CR_CMD_STALE_EVENT_DISABLE (6 << 8) #define UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4) #define UART_CR_CMD_FORCE_STALE (4 << 8) #define UART_CR_CMD_RESET_TX_READY (3 << 8) @@ -124,6 +125,9 @@ #define UARTDM_DMEN_TX_BAM_ENABLE BIT(2) /* UARTDM_1P4 */ #define UARTDM_DMEN_TX_DM_ENABLE BIT(0) /* < UARTDM_1P4 */ +#define UARTDM_DMEN_RX_BAM_ENABLE BIT(3) /* UARTDM_1P4 */ +#define UARTDM_DMEN_RX_DM_ENABLE BIT(1) /* < UARTDM_1P4 */ + #define UARTDM_DMRX 0x34 #define UARTDM_NCF_TX 0x40 #define UARTDM_RX_TOTAL_SNAP 0x38