| Message ID | 1447799871-56374-3-git-send-email-lina.iyer@linaro.org (mailing list archive) |
|---|---|
| State | RFC |
| Delegated to: | Andy Gross |
| Headers | show |
On 17 November 2015 at 23:37, Lina Iyer <lina.iyer@linaro.org> wrote: > From: Marc Titinger <mtitinger+renesas@baylibre.com> > > From: Marc Titinger <mtitinger@baylibre.com> > > This patch allows cluster-level idle-states to being soaked in as > generic domain power states, in order for the domain governor to chose > the most efficient power state compatible with the device constraints. That was possible before this patch, although you are now making it possible to describe this in DT and also modifying genpd to parse this information. Also, I don't get what this has to do with the governor. Of course that governor needs to care about the multiple states you added in patch1, but it should do that no matter if the information comes from DT or not, right. Please re-phrase this to make it bit more clear. > Similarly, devices can register power-states into the cluster domain, in > a manner consistent with idle-states. I don't get this. Can you please elaborate? > > This is a attempt to address device-retention states for devices that > are not hooked to runtime-pm, but feature a retention state handled by > the same firmware that handles idle-states. For instance a L2 caches. I guess whether devices may use runtime PM or not, they still can be attached to a PM domain with multiple power states? > > With Juno, in this example the idle-state 'cluster-sleep-0 ' is known > from each cluster generic domain, as the deepest sate. > > cat /sys/kernel/debug/pm_genpd/* > > Domain State name Enter (ns) / Exit (ns) > ------------------------------------------------------------- > a53_pd cluster-sleep-0 1500000 / 800000 > a57_pd cluster-sleep-0 1500000 / 800000 > > domain status pstate slaves > /device runtime status > ----------------------------------------------------------------------- > a53_pd on > /devices/system/cpu/cpu0 active > /devices/system/cpu/cpu3 suspended > /devices/system/cpu/cpu4 suspended > /devices/system/cpu/cpu5 suspended > /devices/platform/D1 suspended > a57_pd cluster-sleep-0 > /devices/system/cpu/cpu1 suspended > /devices/system/cpu/cpu2 suspended > > Signed-off-by: Marc Titinger <mtitinger+renesas@baylibre.com> > Signed-off-by: Lina Iyer <lina.iyer@linaro.org> > [Lina: removed dependency on dynamic states, simplified initalization, > added of_pm_genpd_init() API] > --- > .../devicetree/bindings/power/power_domain.txt | 63 ++++++++++ Please split the documentation of the suggested new DT bindings into a separate patch that is preceding this one. Also, you need to send it to the DT maintainers. > drivers/base/power/domain.c | 128 +++++++++++++++++++++ > include/linux/pm_domain.h | 6 + > 3 files changed, 197 insertions(+) > > diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt > index 025b5e7..e2f542e 100644 > --- a/Documentation/devicetree/bindings/power/power_domain.txt > +++ b/Documentation/devicetree/bindings/power/power_domain.txt > @@ -29,6 +29,44 @@ Optional properties: > specified by this binding. More details about power domain specifier are > available in the next section. > > +- power-states : A phandle of an idle-state that shall be soaked into a > + generic domain power state. The power-state shall be > + compatible with "linux,domain-state". Why mention the Linux specific "generic power domain" here? Let's instead try to describe this without using specific terminology from Linux. > + > +==Power state== > + > +A PM domain power state describes an idle state of a domain and must be > +have the following properties - > + > + - compatible > + Usage: Required > + Value type: <stringlist> > + Definition: Must be "linux,domain-state" Why do you need a compatible string? You already have the phandle available, I suppose you can use that instead of parsing for a new compatible string. > + > + - entry-latency-us > + Usage: Not required if wakeup-latency-us is provided. > + Value type: <prop-encoded-array> > + Definition: u32 value representing worst case latency in > + microseconds required to enter the idle state. > + The exit-latency-us duration may be guaranteed > + only after entry-latency-us has passed. > + > + - exit-latency-us > + Usage: Not required if wakeup-latency-us is provided. > + Value type: <prop-encoded-array> > + Definition: u32 value representing worst case latency > + in microseconds required to exit the idle state. > + > + - wakeup-latency-us: > + Usage: Not required if entry-latency-us and exit-latency-us > + are provided. > + Value type: <prop-encoded-array> > + Definition: u32 value representing maximum delay between the > + signaling the wakeup of the domain and the domain resuming > + regular operation. > + If omitted, this is assumed to be equal to: > + entry-latency-us + exit-latency-us I think we should decide which of the two alternatives to use, we shouldn't make it more complicated than needed. > + > Example: > > power: power-controller@12340000 { > @@ -55,6 +93,31 @@ Example 2: > #power-domain-cells = <1>; > }; > > +Example 3: > + > + pm-domains { > + a57_pd: a57_pd@ { > + /* will have a57 platform ARM_PD_METHOD_OF_DECLARE*/ > + compatible = "arm,pd","arm,cortex-a57"; > + #power-domain-cells = <0>; > + power-states = <&CLUSTER_SLEEP_0>; > + }; > + > + a53_pd: a53_pd@ { > + /* will have a a53 platform ARM_PD_METHOD_OF_DECLARE*/ > + compatible = "arm,pd","arm,cortex-a53"; > + #power-domain-cells = <0>; > + power-states = <&CLUSTER_SLEEP_0>; > + }; > + > + CLUSTER_SLEEP_0: power-state@0 { > + compatible = "pm-domain,power-state"; > + entry-latency-us = <1000>; > + exit-latency-us = <2000>; > + }; I think we should also cover the case when power-controller has "#power-domain-cells = <[n>0]>". Perhaps extending the first example is then better than adding a new one!? > + }; > + > + > The nodes above define two power controllers: 'parent' and 'child'. > Domains created by the 'child' power controller are subdomains of '0' power > domain provided by the 'parent' power controller. > diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c > index 3242854..fe1be88 100644 > --- a/drivers/base/power/domain.c > +++ b/drivers/base/power/domain.c > @@ -35,6 +35,7 @@ > }) > > #define GENPD_MAX_NAME_SIZE 20 > +#define GENPD_MAX_DOMAIN_STATES 10 Instead of setting a hard limit, let's pre-parse the DTB to get the number of power states. In that way, it should be fairly easy to convert the below code to be more dynamic. > > static int pm_genpd_alloc_states_names(struct generic_pm_domain *genpd, > const struct genpd_power_state *st, > @@ -1515,6 +1516,105 @@ static int pm_genpd_default_restore_state(struct device *dev) > return cb ? cb(dev) : 0; > } > > +static const struct of_device_id power_state_match[] = { > + { .compatible = "linux,domain-state" }, > + { } > +}; > + > +static int of_get_genpd_power_state(struct genpd_power_state *genpd_state, > + struct device_node *state_node) > +{ > + const struct of_device_id *match_id; > + int err = 0; > + u32 latency; > + > + match_id = of_match_node(power_state_match, state_node); > + if (!match_id) > + return -ENODEV; > + > + err = of_property_read_u32(state_node, "wakeup-latency-us", &latency); > + if (err) { > + u32 entry_latency, exit_latency; > + > + err = of_property_read_u32(state_node, "entry-latency-us", > + &entry_latency); > + if (err) { > + pr_debug(" * %s missing entry-latency-us property\n", > + state_node->full_name); > + return -EINVAL; > + } > + > + err = of_property_read_u32(state_node, "exit-latency-us", > + &exit_latency); > + if (err) { > + pr_debug(" * %s missing exit-latency-us property\n", > + state_node->full_name); > + return -EINVAL; > + } > + /* > + * If wakeup-latency-us is missing, default to entry+exit > + * latencies as defined in idle states bindings > + */ > + latency = entry_latency + exit_latency; > + } > + > + genpd_state->power_on_latency_ns = 1000 * latency; > + > + err = of_property_read_u32(state_node, "entry-latency-us", &latency); > + if (err) { > + pr_debug(" * %s missing min-residency-us property\n", > + state_node->full_name); > + return -EINVAL; > + } > + > + genpd_state->power_off_latency_ns = 1000 * latency; > + > + return 0; > +} > + > +static int of_genpd_device_parse_states(struct device_node *np, > + struct genpd_power_state *genpd_states, > + int *state_count) > +{ > + struct device_node *state_node; > + int i, err = 0; > + > + for (i = 0;; i++) { > + struct genpd_power_state genpd_state; > + > + state_node = of_parse_phandle(np, "power-states", i); > + if (!state_node) > + break; > + > + if (i == GENPD_MAX_DOMAIN_STATES) { > + err = -ENOMEM; > + break; > + } > + > + err = of_get_genpd_power_state(&genpd_state, state_node); > + if (err) { > + pr_err > + ("Parsing idle state node %s failed with err %d\n", > + state_node->full_name, err); > + err = -EINVAL; > + break; > + } > +#ifdef CONFIG_PM_ADVANCED_DEBUG > + genpd_state.name = kstrndup(state_node->full_name, > + GENPD_MAX_NAME_SIZE, GFP_KERNEL); > + if (!genpd_state.name) > + err = -ENOMEM; > +#endif > + of_node_put(state_node); > + memcpy(&genpd_states[i], &genpd_state, sizeof(genpd_state)); > +#ifdef CONFIG_PM_ADVANCED_DEBUG > + kfree(genpd_state.name); > +#endif > + } > + *state_count = i; > + return err; > +} > + > /** > * pm_genpd_init - Initialize a generic I/O PM domain object. > * @genpd: PM domain object to initialize. > @@ -1596,6 +1696,34 @@ void pm_genpd_init(struct generic_pm_domain *genpd, > } > EXPORT_SYMBOL_GPL(pm_genpd_init); > > +int of_pm_genpd_init(struct device_node *dn, struct generic_pm_domain *genpd, > + struct dev_power_governor *gov, bool is_off) > +{ > + struct genpd_power_state states[GENPD_MAX_DOMAIN_STATES] = { { 0 } }; > + int state_count = GENPD_MAX_DOMAIN_STATES; > + int ret; > + > + if (IS_ERR_OR_NULL(genpd)) > + return -EINVAL; > + > + ret = of_genpd_device_parse_states(dn, states, &state_count); > + if (ret) { > + pr_err("Error parsing genpd states for %s\n", genpd->name); > + return ret; > + } > + > + ret = genpd_alloc_states_data(genpd, states, state_count); > + if (ret) { > + pr_err("Failed to allocate states for %s\n", genpd->name); > + return ret; > + } > + > + pm_genpd_init(genpd, gov, is_off); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(of_pm_genpd_init); > + > #ifdef CONFIG_PM_GENERIC_DOMAINS_OF > /* > * Device Tree based PM domain providers. > diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h > index 11763cf..e425911 100644 > --- a/include/linux/pm_domain.h > +++ b/include/linux/pm_domain.h > @@ -213,6 +213,8 @@ struct generic_pm_domain *__of_genpd_xlate_onecell( > void *data); > > int genpd_dev_pm_attach(struct device *dev); > +int of_pm_genpd_init(struct device_node *dn, struct generic_pm_domain *genpd, > + struct dev_power_governor *gov, bool is_off); > #else /* !CONFIG_PM_GENERIC_DOMAINS_OF */ > static inline int __of_genpd_add_provider(struct device_node *np, > genpd_xlate_t xlate, void *data) > @@ -234,6 +236,10 @@ static inline int genpd_dev_pm_attach(struct device *dev) > { > return -ENODEV; > } > + > +static inline int of_pm_genpd_init(struct device_node *dn, > + struct generic_pm_domain *genpd, > + struct dev_power_governor *gov, bool is_off) {} > #endif /* CONFIG_PM_GENERIC_DOMAINS_OF */ > > static inline int of_genpd_add_provider_simple(struct device_node *np, > -- > 2.1.4 > Instead of commenting directly to the changes above, let me instead raise a couple of concerns for the overall approach. 1) The case when the power-controller node has "#power-domain-cells = <[n>0]>", isn't covered by $subject patch. I guess we should fix that!? 2) I think that it needs to be the SOC PM domain driver that assigns the initial value for "genpd->state_idx", as I stated also for patch1 when I noticed pm_genpd_init() overrides that value. If you share my view around this, it also means that the parsing of the DTB for "power-states" needs to be done prior the SOC PM domain driver assigns this initial value for "genpd->state_idx". Following your approach in $subject patch, means that its value needs to be updated *after* pm_genpd_init() have been called, perhaps not ideal. Can we find a better way to deal with this? Maybe by instead of adding the of_pm_genpd_init() API, we should provide APIs which manages the DT parsing and the allocation of the struct genpd_power_state? Just an idea though. Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10/12/2015 17:53, Ulf Hansson wrote: > On 17 November 2015 at 23:37, Lina Iyer <lina.iyer@linaro.org> wrote: >> From: Marc Titinger <mtitinger+renesas@baylibre.com> >> >> From: Marc Titinger <mtitinger@baylibre.com> >> >> This patch allows cluster-level idle-states to being soaked in as >> generic domain power states, in order for the domain governor to chose >> the most efficient power state compatible with the device constraints. > Hi Ulf, > That was possible before this patch, although you are now making it > possible to describe this in DT and also modifying genpd to parse this > information. please correct if I'm wrong, but I think that before you could delegate the power-off of a power domain to the platform code called from the cpu-idle driver by toggling enable of an idle-state from genpd. What is proposed here is different: the idea is to prepare for an os-initiated mode for the cluster power management, where genpd keeps track of the last-man cpu (or more generally the last-man IP in the cluster) and calls the platform code to enter the most effective power state compatible with the QoS constraints for devices in the power-domain. IOW it is genpd that controls the plaftormn code to go to sleep or retention state X, instead of cpuidle-driver calling the method indexed for each state. > > Also, I don't get what this has to do with the governor. Of course > that governor needs to care about the multiple states you added in > patch1, but it should do that no matter if the information comes from > DT or not, right. > Agreed, that part should go to the cover-letter instead. > Please re-phrase this to make it bit more clear. Ok. > >> Similarly, devices can register power-states into the cluster domain, in >> a manner consistent with idle-states. > > I don't get this. Can you please elaborate? Alexes addition of "power states" to the power domains was to have a better representation of features of power controllers. For instance QoS may prevent to enter/exit complete power-off, but setting the core voltage to say 0.7v is feasible in terms of timing, and still better than full-power-on etc... Hence the domain has a list of possible states to chose upon, between full power-on and full-power-off, and genpd will call the platform code for this. Now, this patch maps the idle-states as possible power states for the domain: upon the last CPU runtime_put, the domain can chose the deepest state that can be reached given the enter/exit time available, and call the platform code for this. This selected state can be any of: * cluster-sleep (power OFF) * cluster-retention A (L2RAM retention for instance) * cluster-retention B (some device is still on, like PMU or bus analyzer, healthckeck IP etc...) ... * cluster-on, but lower voltage A * cluster-on, but lower voltage B etc... Put short: CPUs, like any other devices in the domain may register a power state. > >> >> This is a attempt to address device-retention states for devices that >> are not hooked to runtime-pm, but feature a retention state handled by >> the same firmware that handles idle-states. For instance a L2 caches. > > I guess whether devices may use runtime PM or not, they still can be > attached to a PM domain with multiple power states? yes. > >> >> With Juno, in this example the idle-state 'cluster-sleep-0 ' is known >> from each cluster generic domain, as the deepest sate. >> >> cat /sys/kernel/debug/pm_genpd/* >> >> Domain State name Enter (ns) / Exit (ns) >> ------------------------------------------------------------- >> a53_pd cluster-sleep-0 1500000 / 800000 >> a57_pd cluster-sleep-0 1500000 / 800000 >> >> domain status pstate slaves >> /device runtime status >> ----------------------------------------------------------------------- >> a53_pd on >> /devices/system/cpu/cpu0 active >> /devices/system/cpu/cpu3 suspended >> /devices/system/cpu/cpu4 suspended >> /devices/system/cpu/cpu5 suspended >> /devices/platform/D1 suspended >> a57_pd cluster-sleep-0 >> /devices/system/cpu/cpu1 suspended >> /devices/system/cpu/cpu2 suspended >> >> Signed-off-by: Marc Titinger <mtitinger+renesas@baylibre.com> >> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> >> [Lina: removed dependency on dynamic states, simplified initalization, >> added of_pm_genpd_init() API] >> --- >> .../devicetree/bindings/power/power_domain.txt | 63 ++++++++++ > > Please split the documentation of the suggested new DT bindings into a > separate patch that is preceding this one. > > Also, you need to send it to the DT maintainers. > >> drivers/base/power/domain.c | 128 +++++++++++++++++++++ >> include/linux/pm_domain.h | 6 + >> 3 files changed, 197 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt >> index 025b5e7..e2f542e 100644 >> --- a/Documentation/devicetree/bindings/power/power_domain.txt >> +++ b/Documentation/devicetree/bindings/power/power_domain.txt >> @@ -29,6 +29,44 @@ Optional properties: >> specified by this binding. More details about power domain specifier are >> available in the next section. >> >> +- power-states : A phandle of an idle-state that shall be soaked into a >> + generic domain power state. The power-state shall be >> + compatible with "linux,domain-state". > > Why mention the Linux specific "generic power domain" here? > > Let's instead try to describe this without using specific terminology > from Linux. Hmm, I will need Lina's help to answer this one. Following a previous review actually I dropped this power-states compatible, to stick with idle-states. > >> + >> +==Power state== >> + >> +A PM domain power state describes an idle state of a domain and must be >> +have the following properties - >> + >> + - compatible >> + Usage: Required >> + Value type: <stringlist> >> + Definition: Must be "linux,domain-state" > > Why do you need a compatible string? > > You already have the phandle available, I suppose you can use that > instead of parsing for a new compatible string. > >> + >> + - entry-latency-us >> + Usage: Not required if wakeup-latency-us is provided. >> + Value type: <prop-encoded-array> >> + Definition: u32 value representing worst case latency in >> + microseconds required to enter the idle state. >> + The exit-latency-us duration may be guaranteed >> + only after entry-latency-us has passed. >> + >> + - exit-latency-us >> + Usage: Not required if wakeup-latency-us is provided. >> + Value type: <prop-encoded-array> >> + Definition: u32 value representing worst case latency >> + in microseconds required to exit the idle state. >> + >> + - wakeup-latency-us: >> + Usage: Not required if entry-latency-us and exit-latency-us >> + are provided. >> + Value type: <prop-encoded-array> >> + Definition: u32 value representing maximum delay between the >> + signaling the wakeup of the domain and the domain resuming >> + regular operation. >> + If omitted, this is assumed to be equal to: >> + entry-latency-us + exit-latency-us > > I think we should decide which of the two alternatives to use, we > shouldn't make it more complicated than needed. Agreed. > >> + >> Example: >> >> power: power-controller@12340000 { >> @@ -55,6 +93,31 @@ Example 2: >> #power-domain-cells = <1>; >> }; >> >> +Example 3: >> + >> + pm-domains { >> + a57_pd: a57_pd@ { >> + /* will have a57 platform ARM_PD_METHOD_OF_DECLARE*/ >> + compatible = "arm,pd","arm,cortex-a57"; >> + #power-domain-cells = <0>; >> + power-states = <&CLUSTER_SLEEP_0>; >> + }; >> + >> + a53_pd: a53_pd@ { >> + /* will have a a53 platform ARM_PD_METHOD_OF_DECLARE*/ >> + compatible = "arm,pd","arm,cortex-a53"; >> + #power-domain-cells = <0>; >> + power-states = <&CLUSTER_SLEEP_0>; >> + }; >> + >> + CLUSTER_SLEEP_0: power-state@0 { >> + compatible = "pm-domain,power-state"; >> + entry-latency-us = <1000>; >> + exit-latency-us = <2000>; >> + }; > > I think we should also cover the case when power-controller has > "#power-domain-cells = <[n>0]>". > > Perhaps extending the first example is then better than adding a new one!? > >> + }; >> + >> + >> The nodes above define two power controllers: 'parent' and 'child'. >> Domains created by the 'child' power controller are subdomains of '0' power >> domain provided by the 'parent' power controller. >> diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c >> index 3242854..fe1be88 100644 >> --- a/drivers/base/power/domain.c >> +++ b/drivers/base/power/domain.c >> @@ -35,6 +35,7 @@ >> }) >> >> #define GENPD_MAX_NAME_SIZE 20 >> +#define GENPD_MAX_DOMAIN_STATES 10 > > Instead of setting a hard limit, let's pre-parse the DTB to get the > number of power states. In that way, it should be fairly easy to > convert the below code to be more dynamic. > >> >> static int pm_genpd_alloc_states_names(struct generic_pm_domain *genpd, >> const struct genpd_power_state *st, >> @@ -1515,6 +1516,105 @@ static int pm_genpd_default_restore_state(struct device *dev) >> return cb ? cb(dev) : 0; >> } >> >> +static const struct of_device_id power_state_match[] = { >> + { .compatible = "linux,domain-state" }, >> + { } >> +}; >> + >> +static int of_get_genpd_power_state(struct genpd_power_state *genpd_state, >> + struct device_node *state_node) >> +{ >> + const struct of_device_id *match_id; >> + int err = 0; >> + u32 latency; >> + >> + match_id = of_match_node(power_state_match, state_node); >> + if (!match_id) >> + return -ENODEV; >> + >> + err = of_property_read_u32(state_node, "wakeup-latency-us", &latency); >> + if (err) { >> + u32 entry_latency, exit_latency; >> + >> + err = of_property_read_u32(state_node, "entry-latency-us", >> + &entry_latency); >> + if (err) { >> + pr_debug(" * %s missing entry-latency-us property\n", >> + state_node->full_name); >> + return -EINVAL; >> + } >> + >> + err = of_property_read_u32(state_node, "exit-latency-us", >> + &exit_latency); >> + if (err) { >> + pr_debug(" * %s missing exit-latency-us property\n", >> + state_node->full_name); >> + return -EINVAL; >> + } >> + /* >> + * If wakeup-latency-us is missing, default to entry+exit >> + * latencies as defined in idle states bindings >> + */ >> + latency = entry_latency + exit_latency; >> + } >> + >> + genpd_state->power_on_latency_ns = 1000 * latency; >> + >> + err = of_property_read_u32(state_node, "entry-latency-us", &latency); >> + if (err) { >> + pr_debug(" * %s missing min-residency-us property\n", >> + state_node->full_name); >> + return -EINVAL; >> + } >> + >> + genpd_state->power_off_latency_ns = 1000 * latency; >> + >> + return 0; >> +} >> + >> +static int of_genpd_device_parse_states(struct device_node *np, >> + struct genpd_power_state *genpd_states, >> + int *state_count) >> +{ >> + struct device_node *state_node; >> + int i, err = 0; >> + >> + for (i = 0;; i++) { >> + struct genpd_power_state genpd_state; >> + >> + state_node = of_parse_phandle(np, "power-states", i); >> + if (!state_node) >> + break; >> + >> + if (i == GENPD_MAX_DOMAIN_STATES) { >> + err = -ENOMEM; >> + break; >> + } >> + >> + err = of_get_genpd_power_state(&genpd_state, state_node); >> + if (err) { >> + pr_err >> + ("Parsing idle state node %s failed with err %d\n", >> + state_node->full_name, err); >> + err = -EINVAL; >> + break; >> + } >> +#ifdef CONFIG_PM_ADVANCED_DEBUG >> + genpd_state.name = kstrndup(state_node->full_name, >> + GENPD_MAX_NAME_SIZE, GFP_KERNEL); >> + if (!genpd_state.name) >> + err = -ENOMEM; >> +#endif >> + of_node_put(state_node); >> + memcpy(&genpd_states[i], &genpd_state, sizeof(genpd_state)); >> +#ifdef CONFIG_PM_ADVANCED_DEBUG >> + kfree(genpd_state.name); >> +#endif >> + } >> + *state_count = i; >> + return err; >> +} >> + >> /** >> * pm_genpd_init - Initialize a generic I/O PM domain object. >> * @genpd: PM domain object to initialize. >> @@ -1596,6 +1696,34 @@ void pm_genpd_init(struct generic_pm_domain *genpd, >> } >> EXPORT_SYMBOL_GPL(pm_genpd_init); >> >> +int of_pm_genpd_init(struct device_node *dn, struct generic_pm_domain *genpd, >> + struct dev_power_governor *gov, bool is_off) >> +{ >> + struct genpd_power_state states[GENPD_MAX_DOMAIN_STATES] = { { 0 } }; >> + int state_count = GENPD_MAX_DOMAIN_STATES; >> + int ret; >> + >> + if (IS_ERR_OR_NULL(genpd)) >> + return -EINVAL; >> + >> + ret = of_genpd_device_parse_states(dn, states, &state_count); >> + if (ret) { >> + pr_err("Error parsing genpd states for %s\n", genpd->name); >> + return ret; >> + } >> + >> + ret = genpd_alloc_states_data(genpd, states, state_count); >> + if (ret) { >> + pr_err("Failed to allocate states for %s\n", genpd->name); >> + return ret; >> + } >> + >> + pm_genpd_init(genpd, gov, is_off); >> + >> + return 0; >> +} >> +EXPORT_SYMBOL_GPL(of_pm_genpd_init); >> + >> #ifdef CONFIG_PM_GENERIC_DOMAINS_OF >> /* >> * Device Tree based PM domain providers. >> diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h >> index 11763cf..e425911 100644 >> --- a/include/linux/pm_domain.h >> +++ b/include/linux/pm_domain.h >> @@ -213,6 +213,8 @@ struct generic_pm_domain *__of_genpd_xlate_onecell( >> void *data); >> >> int genpd_dev_pm_attach(struct device *dev); >> +int of_pm_genpd_init(struct device_node *dn, struct generic_pm_domain *genpd, >> + struct dev_power_governor *gov, bool is_off); >> #else /* !CONFIG_PM_GENERIC_DOMAINS_OF */ >> static inline int __of_genpd_add_provider(struct device_node *np, >> genpd_xlate_t xlate, void *data) >> @@ -234,6 +236,10 @@ static inline int genpd_dev_pm_attach(struct device *dev) >> { >> return -ENODEV; >> } >> + >> +static inline int of_pm_genpd_init(struct device_node *dn, >> + struct generic_pm_domain *genpd, >> + struct dev_power_governor *gov, bool is_off) {} >> #endif /* CONFIG_PM_GENERIC_DOMAINS_OF */ >> >> static inline int of_genpd_add_provider_simple(struct device_node *np, >> -- >> 2.1.4 >> > > Instead of commenting directly to the changes above, let me instead > raise a couple of concerns for the overall approach. > > 1) > The case when the power-controller node has "#power-domain-cells = > <[n>0]>", isn't covered by $subject patch. I guess we should fix > that!? > Indeed, I must confess a bit of procrastination here, my apologies :) > 2) > I think that it needs to be the SOC PM domain driver that assigns the > initial value for "genpd->state_idx", as I stated also for patch1 when > I noticed pm_genpd_init() overrides that value. > dev_pm_domain_attach > If you share my view around this, it also means that the parsing of > the DTB for "power-states" needs to be done prior the SOC PM domain > driver assigns this initial value for "genpd->state_idx". Following > your approach in $subject patch, means that its value needs to be > updated *after* pm_genpd_init() have been called, perhaps not ideal. > > Can we find a better way to deal with this? Maybe by instead of adding > the of_pm_genpd_init() API, we should provide APIs which manages the > DT parsing and the allocation of the struct genpd_power_state? Just an > idea though. In my original patch, I was adding the states from the dev_pm_domain_attach (genpd_devm_pm_attach) API. But since it's called before we know if a matching device driver could be successfully probed anyway, I reckon those device-bound states can be parsed/sorted early on as well. Regarding the initial (exploratory) purpose of my series of handling IPs with special retention states with genpd, this can probably be done more simply with the existing runtime PM framework as discussed in a previous review, let me quote Kevin here: <quote> ... I think has a first pass, rather than add the additional complexity required for a dynamic set of genpd states, I think it's much better to start by assuming that all devices in the domain that affect the domain state should have an associated device and a driver using runtime PM. For example, performance montitoring units (PMUs) like CoreSight have this same issue, and the upstream support for those is already using runtime PM. For really simple/dump devices like L2$ or similar, it might be that we don't need a real driver, but instead the CPU "devices" could do gets/puts on any dependent devices directly </quote> I will see with Lina how much I shall keep from this patch that is useful to the purpose of her series for os-initiated mode. Many thanks, Marc. > > > Kind regards > Uffe > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Dec 15 2015 at 03:07 -0700, Marc Titinger wrote: >On 10/12/2015 17:53, Ulf Hansson wrote: >>On 17 November 2015 at 23:37, Lina Iyer <lina.iyer@linaro.org> wrote: >>>diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt >>>index 025b5e7..e2f542e 100644 >>>--- a/Documentation/devicetree/bindings/power/power_domain.txt >>>+++ b/Documentation/devicetree/bindings/power/power_domain.txt >>>@@ -29,6 +29,44 @@ Optional properties: >>> specified by this binding. More details about power domain specifier are >>> available in the next section. >>> >>>+- power-states : A phandle of an idle-state that shall be soaked into a >>>+ generic domain power state. The power-state shall be >>>+ compatible with "linux,domain-state". >> >>Why mention the Linux specific "generic power domain" here? >> >>Let's instead try to describe this without using specific terminology >>from Linux. > >Hmm, I will need Lina's help to answer this one. >Following a previous review actually I dropped this power-states >compatible, to stick with idle-states. > I didnt want this to be ARM specific. An arm,idle-state is too specific to be reused for generic PM domains, hence this compatible. We dont need a compatible property, but I thought it would be nice to have the property to give structure to the power state node. >> >>>+ >>>+==Power state== >>>+ >>>+A PM domain power state describes an idle state of a domain and must be >>>+have the following properties - >>>+ >>>+ - compatible >>>+ Usage: Required >>>+ Value type: <stringlist> >>>+ Definition: Must be "linux,domain-state" >> >>Why do you need a compatible string? >> >>You already have the phandle available, I suppose you can use that >>instead of parsing for a new compatible string. >> Hmm.. okay. >>>+ >>>+ - entry-latency-us >>>+ Usage: Not required if wakeup-latency-us is provided. >>>+ Value type: <prop-encoded-array> >>>+ Definition: u32 value representing worst case latency in >>>+ microseconds required to enter the idle state. >>>+ The exit-latency-us duration may be guaranteed >>>+ only after entry-latency-us has passed. >>>+ >>>+ - exit-latency-us >>>+ Usage: Not required if wakeup-latency-us is provided. >>>+ Value type: <prop-encoded-array> >>>+ Definition: u32 value representing worst case latency >>>+ in microseconds required to exit the idle state. >>>+ >>>+ - wakeup-latency-us: >>>+ Usage: Not required if entry-latency-us and exit-latency-us >>>+ are provided. >>>+ Value type: <prop-encoded-array> >>>+ Definition: u32 value representing maximum delay between the >>>+ signaling the wakeup of the domain and the domain resuming >>>+ regular operation. >>>+ If omitted, this is assumed to be equal to: >>>+ entry-latency-us + exit-latency-us >> >>I think we should decide which of the two alternatives to use, we >>shouldn't make it more complicated than needed. > >Agreed. > I like the entry + exit option. Thanks, Lina -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Dec 15 2015 at 03:07 -0700, Marc Titinger wrote: >On 10/12/2015 17:53, Ulf Hansson wrote: >>On 17 November 2015 at 23:37, Lina Iyer <lina.iyer@linaro.org> wrote: >>>Similarly, devices can register power-states into the cluster domain, in >>>a manner consistent with idle-states. >> >>I don't get this. Can you please elaborate? > > >Alexes addition of "power states" to the power domains was to have a >better representation of features of power controllers. For instance >QoS may prevent to enter/exit complete power-off, but setting the core >voltage to say 0.7v is feasible in terms of timing, and still better >than full-power-on etc... Hence the domain has a list of possible >states to chose upon, between full power-on and full-power-off, and >genpd will call the platform code for this. > >Now, this patch maps the idle-states as possible power states for the >domain: upon the last CPU runtime_put, the domain can chose the >deepest >state that can be reached given the enter/exit time available, and >call the platform code for this. This selected state can be any of: >* cluster-sleep (power OFF) >* cluster-retention A (L2RAM retention for instance) >* cluster-retention B (some device is still on, like PMU or bus >analyzer, healthckeck IP etc...) >... >* cluster-on, but lower voltage A >* cluster-on, but lower voltage B >etc... > >Put short: CPUs, like any other devices in the domain may register a >power state. > >> >>> >>>This is a attempt to address device-retention states for devices that >>>are not hooked to runtime-pm, but feature a retention state handled by >>>the same firmware that handles idle-states. For instance a L2 caches. >> >>I guess whether devices may use runtime PM or not, they still can be >>attached to a PM domain with multiple power states? > >yes. > From what I understand, it seems like you want to have a constraint on a domain state based on the device's idle state. This seems more like a job for a governor. You could write a governor that chooses the domain state based on these dependencies. I am not sure this can be solved generically without increasing the complexity of genpd idle states. Thanks, Lina -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 025b5e7..e2f542e 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -29,6 +29,44 @@ Optional properties: specified by this binding. More details about power domain specifier are available in the next section. +- power-states : A phandle of an idle-state that shall be soaked into a + generic domain power state. The power-state shall be + compatible with "linux,domain-state". + +==Power state== + +A PM domain power state describes an idle state of a domain and must be +have the following properties - + + - compatible + Usage: Required + Value type: <stringlist> + Definition: Must be "linux,domain-state" + + - entry-latency-us + Usage: Not required if wakeup-latency-us is provided. + Value type: <prop-encoded-array> + Definition: u32 value representing worst case latency in + microseconds required to enter the idle state. + The exit-latency-us duration may be guaranteed + only after entry-latency-us has passed. + + - exit-latency-us + Usage: Not required if wakeup-latency-us is provided. + Value type: <prop-encoded-array> + Definition: u32 value representing worst case latency + in microseconds required to exit the idle state. + + - wakeup-latency-us: + Usage: Not required if entry-latency-us and exit-latency-us + are provided. + Value type: <prop-encoded-array> + Definition: u32 value representing maximum delay between the + signaling the wakeup of the domain and the domain resuming + regular operation. + If omitted, this is assumed to be equal to: + entry-latency-us + exit-latency-us + Example: power: power-controller@12340000 { @@ -55,6 +93,31 @@ Example 2: #power-domain-cells = <1>; }; +Example 3: + + pm-domains { + a57_pd: a57_pd@ { + /* will have a57 platform ARM_PD_METHOD_OF_DECLARE*/ + compatible = "arm,pd","arm,cortex-a57"; + #power-domain-cells = <0>; + power-states = <&CLUSTER_SLEEP_0>; + }; + + a53_pd: a53_pd@ { + /* will have a a53 platform ARM_PD_METHOD_OF_DECLARE*/ + compatible = "arm,pd","arm,cortex-a53"; + #power-domain-cells = <0>; + power-states = <&CLUSTER_SLEEP_0>; + }; + + CLUSTER_SLEEP_0: power-state@0 { + compatible = "pm-domain,power-state"; + entry-latency-us = <1000>; + exit-latency-us = <2000>; + }; + }; + + The nodes above define two power controllers: 'parent' and 'child'. Domains created by the 'child' power controller are subdomains of '0' power domain provided by the 'parent' power controller. diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 3242854..fe1be88 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -35,6 +35,7 @@ }) #define GENPD_MAX_NAME_SIZE 20 +#define GENPD_MAX_DOMAIN_STATES 10 static int pm_genpd_alloc_states_names(struct generic_pm_domain *genpd, const struct genpd_power_state *st, @@ -1515,6 +1516,105 @@ static int pm_genpd_default_restore_state(struct device *dev) return cb ? cb(dev) : 0; } +static const struct of_device_id power_state_match[] = { + { .compatible = "linux,domain-state" }, + { } +}; + +static int of_get_genpd_power_state(struct genpd_power_state *genpd_state, + struct device_node *state_node) +{ + const struct of_device_id *match_id; + int err = 0; + u32 latency; + + match_id = of_match_node(power_state_match, state_node); + if (!match_id) + return -ENODEV; + + err = of_property_read_u32(state_node, "wakeup-latency-us", &latency); + if (err) { + u32 entry_latency, exit_latency; + + err = of_property_read_u32(state_node, "entry-latency-us", + &entry_latency); + if (err) { + pr_debug(" * %s missing entry-latency-us property\n", + state_node->full_name); + return -EINVAL; + } + + err = of_property_read_u32(state_node, "exit-latency-us", + &exit_latency); + if (err) { + pr_debug(" * %s missing exit-latency-us property\n", + state_node->full_name); + return -EINVAL; + } + /* + * If wakeup-latency-us is missing, default to entry+exit + * latencies as defined in idle states bindings + */ + latency = entry_latency + exit_latency; + } + + genpd_state->power_on_latency_ns = 1000 * latency; + + err = of_property_read_u32(state_node, "entry-latency-us", &latency); + if (err) { + pr_debug(" * %s missing min-residency-us property\n", + state_node->full_name); + return -EINVAL; + } + + genpd_state->power_off_latency_ns = 1000 * latency; + + return 0; +} + +static int of_genpd_device_parse_states(struct device_node *np, + struct genpd_power_state *genpd_states, + int *state_count) +{ + struct device_node *state_node; + int i, err = 0; + + for (i = 0;; i++) { + struct genpd_power_state genpd_state; + + state_node = of_parse_phandle(np, "power-states", i); + if (!state_node) + break; + + if (i == GENPD_MAX_DOMAIN_STATES) { + err = -ENOMEM; + break; + } + + err = of_get_genpd_power_state(&genpd_state, state_node); + if (err) { + pr_err + ("Parsing idle state node %s failed with err %d\n", + state_node->full_name, err); + err = -EINVAL; + break; + } +#ifdef CONFIG_PM_ADVANCED_DEBUG + genpd_state.name = kstrndup(state_node->full_name, + GENPD_MAX_NAME_SIZE, GFP_KERNEL); + if (!genpd_state.name) + err = -ENOMEM; +#endif + of_node_put(state_node); + memcpy(&genpd_states[i], &genpd_state, sizeof(genpd_state)); +#ifdef CONFIG_PM_ADVANCED_DEBUG + kfree(genpd_state.name); +#endif + } + *state_count = i; + return err; +} + /** * pm_genpd_init - Initialize a generic I/O PM domain object. * @genpd: PM domain object to initialize. @@ -1596,6 +1696,34 @@ void pm_genpd_init(struct generic_pm_domain *genpd, } EXPORT_SYMBOL_GPL(pm_genpd_init); +int of_pm_genpd_init(struct device_node *dn, struct generic_pm_domain *genpd, + struct dev_power_governor *gov, bool is_off) +{ + struct genpd_power_state states[GENPD_MAX_DOMAIN_STATES] = { { 0 } }; + int state_count = GENPD_MAX_DOMAIN_STATES; + int ret; + + if (IS_ERR_OR_NULL(genpd)) + return -EINVAL; + + ret = of_genpd_device_parse_states(dn, states, &state_count); + if (ret) { + pr_err("Error parsing genpd states for %s\n", genpd->name); + return ret; + } + + ret = genpd_alloc_states_data(genpd, states, state_count); + if (ret) { + pr_err("Failed to allocate states for %s\n", genpd->name); + return ret; + } + + pm_genpd_init(genpd, gov, is_off); + + return 0; +} +EXPORT_SYMBOL_GPL(of_pm_genpd_init); + #ifdef CONFIG_PM_GENERIC_DOMAINS_OF /* * Device Tree based PM domain providers. diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 11763cf..e425911 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -213,6 +213,8 @@ struct generic_pm_domain *__of_genpd_xlate_onecell( void *data); int genpd_dev_pm_attach(struct device *dev); +int of_pm_genpd_init(struct device_node *dn, struct generic_pm_domain *genpd, + struct dev_power_governor *gov, bool is_off); #else /* !CONFIG_PM_GENERIC_DOMAINS_OF */ static inline int __of_genpd_add_provider(struct device_node *np, genpd_xlate_t xlate, void *data) @@ -234,6 +236,10 @@ static inline int genpd_dev_pm_attach(struct device *dev) { return -ENODEV; } + +static inline int of_pm_genpd_init(struct device_node *dn, + struct generic_pm_domain *genpd, + struct dev_power_governor *gov, bool is_off) {} #endif /* CONFIG_PM_GENERIC_DOMAINS_OF */ static inline int of_genpd_add_provider_simple(struct device_node *np,