| Message ID | 1463634020-17252-5-git-send-email-andy.gross@linaro.org (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On Wed 18 May 22:00 PDT 2016, Andy Gross wrote: > The #size-cells for the pmics are 0, but we specify a size in the > reg property so that MPP and GPIO modules can figure out how many > pins there are. Now that we've done that by counting irqs, we can > remove the size elements in the reg properties and be DT > compliant. > > Signed-off-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > arch/arm/boot/dts/qcom-pma8084.dtsi | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi > index 4e9bd3f..ea7fce3 100644 > --- a/arch/arm/boot/dts/qcom-pma8084.dtsi > +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi > @@ -12,15 +12,15 @@ > > rtc@6000 { > compatible = "qcom,pm8941-rtc"; > - reg = <0x6000 0x100>, > - <0x6100 0x100>; > + reg = <0x6000>, > + <0x6100>; > reg-names = "rtc", "alarm"; > interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; > }; > > pma8084_gpios: gpios@c000 { > compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio"; > - reg = <0xc000 0x1600>; > + reg = <0xc000>; > gpio-controller; > #gpio-cells = <2>; > interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, > @@ -49,7 +49,7 @@ > > pma8084_mpps: mpps@a000 { > compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp"; > - reg = <0xa000 0x800>; > + reg = <0xa000>; > gpio-controller; > #gpio-cells = <2>; > interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, > @@ -64,7 +64,7 @@ > > pma8084_temp: temp-alarm@2400 { > compatible = "qcom,spmi-temp-alarm"; > - reg = <0x2400 0x100>; > + reg = <0x2400>; > interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; > #thermal-sensor-cells = <0>; > io-channels = <&pma8084_vadc VADC_DIE_TEMP>; > @@ -73,7 +73,7 @@ > > pma8084_vadc: vadc@3100 { > compatible = "qcom,spmi-vadc"; > - reg = <0x3100 0x100>; > + reg = <0x3100>; > interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; > #address-cells = <1>; > #size-cells = <0>; > -- > 1.9.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index 4e9bd3f..ea7fce3 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -12,15 +12,15 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000 0x100>, - <0x6100 0x100>; + reg = <0x6000>, + <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; pma8084_gpios: gpios@c000 { compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio"; - reg = <0xc000 0x1600>; + reg = <0xc000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, @@ -49,7 +49,7 @@ pma8084_mpps: mpps@a000 { compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp"; - reg = <0xa000 0x800>; + reg = <0xa000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, @@ -64,7 +64,7 @@ pma8084_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400 0x100>; + reg = <0x2400>; interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; #thermal-sensor-cells = <0>; io-channels = <&pma8084_vadc VADC_DIE_TEMP>; @@ -73,7 +73,7 @@ pma8084_vadc: vadc@3100 { compatible = "qcom,spmi-vadc"; - reg = <0x3100 0x100>; + reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>;
The #size-cells for the pmics are 0, but we specify a size in the reg property so that MPP and GPIO modules can figure out how many pins there are. Now that we've done that by counting irqs, we can remove the size elements in the reg properties and be DT compliant. Signed-off-by: Andy Gross <andy.gross@linaro.org> --- arch/arm/boot/dts/qcom-pma8084.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)