From patchwork Mon Nov 7 11:24:34 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ritesh Harjani X-Patchwork-Id: 9414855 X-Patchwork-Delegate: agross@codeaurora.org Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 158B260720 for ; Mon, 7 Nov 2016 11:34:46 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 01F5228CD0 for ; Mon, 7 Nov 2016 11:34:46 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id EA96528CD7; Mon, 7 Nov 2016 11:34:45 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=2.0 tests=BAYES_00,DKIM_SIGNED, RCVD_IN_DNSWL_HI,T_DKIM_INVALID autolearn=unavailable version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 5581928CD0 for ; Mon, 7 Nov 2016 11:34:45 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752522AbcKGLem (ORCPT ); Mon, 7 Nov 2016 06:34:42 -0500 Received: from smtp.codeaurora.org ([198.145.29.96]:38998 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751372AbcKGLeh (ORCPT ); Mon, 7 Nov 2016 06:34:37 -0500 Received: by smtp.codeaurora.org (Postfix, from userid 1000) id 3023F6126D; Mon, 7 Nov 2016 11:26:43 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=codeaurora.org; s=default; t=1478518003; bh=RGhzJ0nvfii3++RmaI6GVylZDGEQFSLdIa6PJ6jXJAU=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=bbF3QS7XfAvFNcE6iDBWvddIEKu8tAws/zIh9r6HriYTp01Otddlwvc4C5CaBAmQS t6Fu2m4Qij1gd/L5/z8K4zeYZWZHd2WXdpiDNjDz9RYxKI6CMbCFZ/AwlKDOR8X2jQ 5yDRGhd2OL66sodSwvY1EinhZ2Qy5YLJUqBylNI4= Received: from rharjani-linux.qualcomm.com (unknown [202.46.23.54]) (using TLSv1.1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: riteshh@smtp.codeaurora.org) by smtp.codeaurora.org (Postfix) with ESMTPSA id 7E5BE6126E; Mon, 7 Nov 2016 11:26:35 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=codeaurora.org; s=default; t=1478518002; bh=RGhzJ0nvfii3++RmaI6GVylZDGEQFSLdIa6PJ6jXJAU=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=LtpndkS1Z6cCbXCrvbsvxYZVLgwD/8glIryxLVPl/uA+6draBLr5t/j5jHezoDEE9 rae2EWdFdEC+ULvQCjjTSSGjWBGJPHoIEVd8wTO/WsZpwt8YzaT1t6oy9PUcXLCC6B IbZkDDadK6AFKx62FF2OLLgIlhkwjl3YusO1IUyI= DMARC-Filter: OpenDMARC Filter v1.3.1 smtp.codeaurora.org 7E5BE6126E Authentication-Results: pdx-caf-mail.web.codeaurora.org; dmarc=none header.from=codeaurora.org Authentication-Results: pdx-caf-mail.web.codeaurora.org; spf=pass smtp.mailfrom=riteshh@codeaurora.org From: Ritesh Harjani To: ulf.hansson@linaro.org, linux-mmc@vger.kernel.org, adrian.hunter@intel.com, shawn.lin@rock-chips.com, sboyd@codeaurora.org Cc: devicetree@vger.kernel.org, linux-clk@vger.kernel.org, david.brown@linaro.org, andy.gross@linaro.org, linux-arm-msm@vger.kernel.org, georgi.djakov@linaro.org, alex.lemberg@sandisk.com, mateusz.nowak@intel.com, Yuliy.Izrailov@sandisk.com, asutoshd@codeaurora.org, kdorfman@codeaurora.org, david.griego@linaro.org, stummala@codeaurora.org, venkatg@codeaurora.org, rnayak@codeaurora.org, pramod.gurav@linaro.org, Ritesh Harjani Subject: [PATCH v6 11/14] mmc: sdhci-msm: Add HS400 platform support Date: Mon, 7 Nov 2016 16:54:34 +0530 Message-Id: <1478517877-23733-12-git-send-email-riteshh@codeaurora.org> X-Mailer: git-send-email 1.8.2.1 In-Reply-To: <1478517877-23733-1-git-send-email-riteshh@codeaurora.org> References: <1478517877-23733-1-git-send-email-riteshh@codeaurora.org> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Venkat Gopalakrishnan The following msm platform specific changes are added to support HS400. - Allow tuning for HS400 mode. - Configure HS400 timing mode using the VENDOR_SPECIFIC_FUNC register. Signed-off-by: Venkat Gopalakrishnan Signed-off-by: Ritesh Harjani Acked-by: Adrian Hunter --- drivers/mmc/host/sdhci-msm.c | 127 +++++++++++++++++++++++++++++++++++++++---- 1 file changed, 117 insertions(+), 10 deletions(-) diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 220567c..2561c41 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -31,6 +31,7 @@ #define HC_MODE_EN 0x1 #define CORE_POWER 0x0 #define CORE_SW_RST BIT(7) +#define FF_CLK_SW_RST_DIS BIT(13) #define CORE_PWRCTL_STATUS 0xdc #define CORE_PWRCTL_MASK 0xe0 @@ -64,11 +65,18 @@ #define CORE_VENDOR_SPEC 0x10c #define CORE_CLK_PWRSAVE BIT(1) +#define CORE_HC_MCLK_SEL_DFLT (2 << 8) +#define CORE_HC_MCLK_SEL_HS400 (3 << 8) +#define CORE_HC_MCLK_SEL_MASK (3 << 8) +#define CORE_HC_SELECT_IN_EN BIT(18) +#define CORE_HC_SELECT_IN_HS400 (6 << 19) +#define CORE_HC_SELECT_IN_MASK (7 << 19) #define CORE_VENDOR_SPEC_CAPABILITIES0 0x11c #define TCXO_FREQ 19200000 #define SDHCI_MSM_MIN_CLOCK 400000 +#define CORE_FREQ_100MHZ (100 * 1000 * 1000) #define CDR_SELEXT_SHIFT 20 #define CDR_SELEXT_MASK (0xf << CDR_SELEXT_SHIFT) @@ -85,6 +93,8 @@ struct sdhci_msm_host { unsigned long clk_rate; struct mmc_host *mmc; bool use_14lpp_dll_reset; + bool tuning_done; + bool calibration_done; }; /* Platform specific tuning */ @@ -173,8 +183,8 @@ static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase) * Find out the greatest range of consecuitive selected * DLL clock output phases that can be used as sampling * setting for SD3.0 UHS-I card read operation (in SDR104 - * timing mode) or for eMMC4.5 card read operation (in HS200 - * timing mode). + * timing mode) or for eMMC4.5 card read operation (in + * HS400/HS200 timing mode). * Select the 3/4 of the range and configure the DLL with the * selected DLL clock output phase. */ @@ -426,9 +436,10 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode) * Tuning is required for SDR104, HS200 and HS400 cards and * if clock frequency is greater than 100MHz in these modes. */ - if (host->clock <= 100 * 1000 * 1000 || - !((ios.timing == MMC_TIMING_MMC_HS200) || - (ios.timing == MMC_TIMING_UHS_SDR104))) + if (host->clock <= CORE_FREQ_100MHZ || + !(ios.timing == MMC_TIMING_MMC_HS400 || + ios.timing == MMC_TIMING_MMC_HS200 || + ios.timing == MMC_TIMING_UHS_SDR104)) return 0; retry: @@ -479,6 +490,8 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode) rc = -EIO; } + if (!rc) + msm_host->tuning_done = true; return rc; } @@ -486,7 +499,10 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) { struct mmc_host *mmc = host->mmc; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); u16 ctrl_2; + u32 config; ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); /* Select Bus Speed Mode for host */ @@ -501,6 +517,7 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host, case MMC_TIMING_UHS_SDR50: ctrl_2 |= SDHCI_CTRL_UHS_SDR50; break; + case MMC_TIMING_MMC_HS400: case MMC_TIMING_MMC_HS200: case MMC_TIMING_UHS_SDR104: ctrl_2 |= SDHCI_CTRL_UHS_SDR104; @@ -517,11 +534,31 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host, * provide feedback clock, the mode selection can be any value less * than 3'b011 in bits [2:0] of HOST CONTROL2 register. */ - if (host->clock <= 100000000 && - (uhs == MMC_TIMING_MMC_HS400 || - uhs == MMC_TIMING_MMC_HS200 || - uhs == MMC_TIMING_UHS_SDR104)) - ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + if (host->clock <= CORE_FREQ_100MHZ) { + if ((uhs == MMC_TIMING_MMC_HS400) || + (uhs == MMC_TIMING_MMC_HS200) || + (uhs == MMC_TIMING_UHS_SDR104)) + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + /* + * Make sure DLL is disabled when not required + * + * Write 1 to DLL_RST bit of DLL_CONFIG register + */ + config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config |= CORE_DLL_RST; + writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + + /* Write 1 to DLL_PDN bit of DLL_CONFIG register */ + config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); + config |= CORE_DLL_PDN; + writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); + + /* + * The DLL needs to be restored and CDCLP533 recalibrated + * when the clock frequency is set back to 400MHz. + */ + msm_host->calibration_done = false; + } dev_dbg(mmc_dev(mmc), "%s: clock=%u uhs=%u ctrl_2=0x%x\n", mmc_hostname(host->mmc), host->clock, uhs, ctrl_2); @@ -634,6 +671,7 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); struct mmc_ios curr_ios = host->mmc->ios; + u32 config; int rc; if (!clock) { @@ -652,6 +690,70 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) (curr_ios.timing == MMC_TIMING_MMC_DDR52) || (curr_ios.timing == MMC_TIMING_MMC_HS400)) clock *= 2; + /* + * In general all timing modes are controlled via UHS mode select in + * Host Control2 register. eMMC specific HS200/HS400 doesn't have + * their respective modes defined here, hence we use these values. + * + * HS200 - SDR104 (Since they both are equivalent in functionality) + * HS400 - This involves multiple configurations + * Initially SDR104 - when tuning is required as HS200 + * Then when switching to DDR @ 400MHz (HS400) we use + * the vendor specific HC_SELECT_IN to control the mode. + * + * In addition to controlling the modes we also need to select the + * correct input clock for DLL depending on the mode. + * + * HS400 - divided clock (free running MCLK/2) + * All other modes - default (free running MCLK) + */ + if (curr_ios.timing == MMC_TIMING_MMC_HS400) { + /* Select the divided clock (free running MCLK/2) */ + config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config &= ~CORE_HC_MCLK_SEL_MASK; + config |= CORE_HC_MCLK_SEL_HS400; + + writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + /* + * Select HS400 mode using the HC_SELECT_IN from VENDOR SPEC + * register + */ + if (msm_host->tuning_done && !msm_host->calibration_done) { + /* + * Write 0x6 to HC_SELECT_IN and 1 to HC_SELECT_IN_EN + * field in VENDOR_SPEC_FUNC + */ + config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config |= CORE_HC_SELECT_IN_HS400; + config |= CORE_HC_SELECT_IN_EN; + writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + } + } else { + /* Select the default clock (free running MCLK) */ + config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config &= ~CORE_HC_MCLK_SEL_MASK; + config |= CORE_HC_MCLK_SEL_DFLT; + writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + + /* + * Disable HC_SELECT_IN to be able to use the UHS mode select + * configuration from Host Control2 register for all other + * modes. + * + * Write 0 to HC_SELECT_IN and HC_SELECT_IN_EN field + * in VENDOR_SPEC_FUNC + */ + config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config &= ~CORE_HC_SELECT_IN_EN; + config &= ~CORE_HC_SELECT_IN_MASK; + writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + } + + /* + * Make sure above writes impacting free running MCLK are completed + * before changing the clk_rate at GCC. + */ + wmb(); if (clock != msm_host->clk_rate) { rc = clk_set_rate(msm_host->clk, clock); @@ -790,6 +892,11 @@ static int sdhci_msm_probe(struct platform_device *pdev) /* Set HC_MODE_EN bit in HC_MODE register */ writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE)); + /* Set FF_CLK_SW_RST_DIS bit in HC_MODE register */ + config = readl_relaxed(msm_host->core_mem + CORE_HC_MODE); + config |= FF_CLK_SW_RST_DIS; + writel_relaxed(config, msm_host->core_mem + CORE_HC_MODE); + host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION)); dev_dbg(&pdev->dev, "Host Version: 0x%x Vendor Version 0x%x\n", host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >>