@@ -8,6 +8,7 @@ on the Qualcomm Hexagon core.
Value type: <string>
Definition: must be one of:
"qcom,q6v5-pil"
+ "qcom,q6v56-pil"
- reg:
Usage: required
@@ -30,13 +30,14 @@
#include <linux/reset.h>
#include <linux/soc/qcom/smem.h>
#include <linux/soc/qcom/smem_state.h>
+#include <linux/of_device.h>
#include "remoteproc_internal.h"
#include "qcom_mdt_loader.h"
#include <linux/qcom_scm.h>
-#define MBA_FIRMWARE_NAME "mba.b00"
+#define MBA_FIRMWARE_NAME "mba.b00"
#define MPSS_FIRMWARE_NAME "modem.mdt"
#define MPSS_CRASH_REASON_SMEM 421
@@ -93,6 +94,23 @@
#define QDSS_BHS_ON BIT(21)
#define QDSS_LDO_BYP BIT(22)
+struct q6_rproc_res {
+ char *q6_mba_image;
+ int (*q6_reset_init)(void *q, void *p);
+ char **proxy_reg_string;
+ char **active_reg_string;
+ int **proxy_voltage_load;
+ int **active_voltage_load;
+ char **proxy_clk_string;
+ char **active_clk_string;
+};
+
+struct reg_info {
+ struct regulator *reg;
+ int uV;
+ int uA;
+};
+
struct q6v5 {
struct device *dev;
struct rproc *rproc;
@@ -890,8 +908,34 @@ static int q6v5_remove(struct platform_device *pdev)
return 0;
}
+static char *proxy_q6v56_regulator_namestr[] = {"mx", "cx", "pll", NULL};
+static int proxy_q6v56_voltage_load[3][2] = { {1050000, 0}, {0, 100000},
+ {0, 100000} };
+static char *proxy_q6v56_clk_namestr[] = {"xo", "pnoc", "qdss", NULL};
+static char *active_q6v56_clk_namestr[] = {"iface", "bus", "mem",
+ "gpll0_mss_clk", "snoc_axi_clk", "mnoc_axi_clk", NULL};
+
+static const struct q6_rproc_res q6v56_res = {
+ .q6_reset_init = NULL,
+ .q6_mba_image = "mba.mbn",
+ .proxy_reg_string = proxy_q6v56_regulator_namestr,
+ .active_reg_string = NULL,
+ .proxy_voltage_load = (int **)proxy_q6v56_voltage_load,
+ .active_voltage_load = NULL,
+ .proxy_clk_string = proxy_q6v56_clk_namestr,
+ .active_clk_string = active_q6v56_clk_namestr,
+};
+
+static const struct q6_rproc_res q6v5_res = {
+ .q6_reset_init = NULL,
+ .q6_mba_image = "mba.mbn",
+ .proxy_reg_string = proxy_q6v56_regulator_namestr,
+ .proxy_voltage_load = (int **)proxy_q6v56_voltage_load,
+};
+
static const struct of_device_id q6v5_of_match[] = {
- { .compatible = "qcom,q6v5-pil", },
+ { .compatible = "qcom,q6v5-pil", .data = &q6v5_res},
+ { .compatible = "qcom,q6v56-pil", .data = &q6v56_res},
{ },
};
Embed resources specific to version of hexagon chip in device structure to avoid conditional check for manipulation of those resources in driver code. Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> --- .../devicetree/bindings/remoteproc/qcom,q6v5.txt | 1 + drivers/remoteproc/qcom_q6v5_pil.c | 48 +++++++++++++++++++++- 2 files changed, 47 insertions(+), 2 deletions(-)