diff mbox

[v9,10/16] mmc: sdhci-msm: Implement set_clock callback for sdhci-msm

Message ID 1479710246-26676-11-git-send-email-riteshh@codeaurora.org (mailing list archive)
State Not Applicable, archived
Delegated to: Andy Gross
Headers show

Commit Message

Ritesh Harjani Nov. 21, 2016, 6:37 a.m. UTC
sdhci-msm controller may have different clk-rates for each
bus speed mode. Thus implement set_clock callback for
sdhci-msm driver.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/host/sdhci-msm.c | 66 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 65 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 15a8b8e..00759ef 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -84,6 +84,7 @@  struct sdhci_msm_host {
 	struct clk *pclk;	/* SDHC peripheral bus clock */
 	struct clk *bus_clk;	/* SDHC bus voter clock */
 	struct clk *xo_clk;	/* TCXO clk needed for FLL feature of cm_dll*/
+	unsigned long clk_rate;
 	struct mmc_host *mmc;
 	bool use_14lpp_dll_reset;
 };
@@ -571,6 +572,69 @@  static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
 	return SDHCI_MSM_MIN_CLOCK;
 }
 
+/**
+ * __sdhci_msm_set_clock - sdhci_msm clock control.
+ *
+ * Description:
+ * MSM controller does not use internal divider and
+ * instead directly control the GCC clock as per
+ * HW recommendation.
+ **/
+void __sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	u16 clk;
+	/*
+	 * Keep actual_clock as zero -
+	 * - since there is no divider used so no need of having actual_clock.
+	 * - MSM controller uses SDCLK for data timeout calculation. If
+	 *   actual_clock is zero, host->clock is taken for calculation.
+	 */
+	host->mmc->actual_clock = 0;
+
+	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+	if (clock == 0)
+		return;
+
+	/*
+	 * MSM controller do not use clock divider.
+	 * Thus read SDHCI_CLOCK_CONTROL and only enable
+	 * clock with no divider value programmed.
+	 */
+	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	sdhci_enable_clk(host, clk);
+}
+
+/* sdhci_msm_set_clock - Called with (host->lock) spinlock held. */
+static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+	int rc;
+
+	if (!clock) {
+		msm_host->clk_rate = clock;
+		goto out;
+	}
+
+	spin_unlock_irq(&host->lock);
+
+	rc = clk_set_rate(msm_host->clk, clock);
+	if (rc) {
+		pr_err("%s: Failed to set clock at rate %u\n",
+		       mmc_hostname(host->mmc), clock);
+		goto out_lock;
+	}
+	msm_host->clk_rate = clock;
+	pr_debug("%s: Setting clock at rate %lu\n",
+		 mmc_hostname(host->mmc), clk_get_rate(msm_host->clk));
+
+out_lock:
+	spin_lock_irq(&host->lock);
+out:
+	__sdhci_msm_set_clock(host, clock);
+}
+
 static const struct of_device_id sdhci_msm_dt_match[] = {
 	{ .compatible = "qcom,sdhci-msm-v4" },
 	{},
@@ -581,7 +645,7 @@  static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
 static const struct sdhci_ops sdhci_msm_ops = {
 	.platform_execute_tuning = sdhci_msm_execute_tuning,
 	.reset = sdhci_reset,
-	.set_clock = sdhci_set_clock,
+	.set_clock = sdhci_msm_set_clock,
 	.get_min_clock = sdhci_msm_get_min_clock,
 	.get_max_clock = sdhci_msm_get_max_clock,
 	.set_bus_width = sdhci_set_bus_width,