| Message ID | 1517644697-30806-3-git-send-email-absahu@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Andy Gross |
| Headers | show |
Tested on Centriq 2400 Reviewed-by: Austin Christ <austinwc@codeaurora.org> On 2/3/2018 12:58 AM, Abhishek Sahu wrote: > 1. Assigns use_dma in qup_dev structure itself which will > help in subsequent patches to determine the mode in IRQ handler. > 2. Does minor code reorganization for loops to reduce the > unnecessary comparison and assignment. > > Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> > --- > drivers/i2c/busses/i2c-qup.c | 19 +++++++++++-------- > 1 file changed, 11 insertions(+), 8 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c > index 9faa26c41a..c68f433 100644 > --- a/drivers/i2c/busses/i2c-qup.c > +++ b/drivers/i2c/busses/i2c-qup.c > @@ -190,6 +190,8 @@ struct qup_i2c_dev { > > /* dma parameters */ > bool is_dma; > + /* To check if the current transfer is using DMA */ > + bool use_dma; > struct dma_pool *dpool; > struct qup_i2c_tag start_tag; > struct qup_i2c_bam brx; > @@ -1297,7 +1299,7 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, > int num) > { > struct qup_i2c_dev *qup = i2c_get_adapdata(adap); > - int ret, len, idx = 0, use_dma = 0; > + int ret, len, idx = 0; > > qup->bus_err = 0; > qup->qup_err = 0; > @@ -1326,13 +1328,12 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, > len = (msgs[idx].len > qup->out_fifo_sz) || > (msgs[idx].len > qup->in_fifo_sz); > > - if ((!is_vmalloc_addr(msgs[idx].buf)) && len) { > - use_dma = 1; > - } else { > - use_dma = 0; > + if (is_vmalloc_addr(msgs[idx].buf) || !len) > break; > - } > } > + > + if (idx == num) > + qup->use_dma = true; > } > > idx = 0; > @@ -1356,15 +1357,17 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, > > reinit_completion(&qup->xfer); > > - if (use_dma) { > + if (qup->use_dma) { > ret = qup_i2c_bam_xfer(adap, &msgs[idx], num); > + qup->use_dma = false; > + break; > } else { > if (msgs[idx].flags & I2C_M_RD) > ret = qup_i2c_read_one_v2(qup, &msgs[idx]); > else > ret = qup_i2c_write_one_v2(qup, &msgs[idx]); > } > - } while ((idx++ < (num - 1)) && !use_dma && !ret); > + } while ((idx++ < (num - 1)) && !ret); > > if (!ret) > ret = qup_i2c_change_state(qup, QUP_RESET_STATE); >
On Sat, Feb 03, 2018 at 01:28:07PM +0530, Abhishek Sahu wrote: > 1. Assigns use_dma in qup_dev structure itself which will > help in subsequent patches to determine the mode in IRQ handler. > 2. Does minor code reorganization for loops to reduce the > unnecessary comparison and assignment. > > Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 9faa26c41a..c68f433 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -190,6 +190,8 @@ struct qup_i2c_dev { /* dma parameters */ bool is_dma; + /* To check if the current transfer is using DMA */ + bool use_dma; struct dma_pool *dpool; struct qup_i2c_tag start_tag; struct qup_i2c_bam brx; @@ -1297,7 +1299,7 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, int num) { struct qup_i2c_dev *qup = i2c_get_adapdata(adap); - int ret, len, idx = 0, use_dma = 0; + int ret, len, idx = 0; qup->bus_err = 0; qup->qup_err = 0; @@ -1326,13 +1328,12 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, len = (msgs[idx].len > qup->out_fifo_sz) || (msgs[idx].len > qup->in_fifo_sz); - if ((!is_vmalloc_addr(msgs[idx].buf)) && len) { - use_dma = 1; - } else { - use_dma = 0; + if (is_vmalloc_addr(msgs[idx].buf) || !len) break; - } } + + if (idx == num) + qup->use_dma = true; } idx = 0; @@ -1356,15 +1357,17 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, reinit_completion(&qup->xfer); - if (use_dma) { + if (qup->use_dma) { ret = qup_i2c_bam_xfer(adap, &msgs[idx], num); + qup->use_dma = false; + break; } else { if (msgs[idx].flags & I2C_M_RD) ret = qup_i2c_read_one_v2(qup, &msgs[idx]); else ret = qup_i2c_write_one_v2(qup, &msgs[idx]); } - } while ((idx++ < (num - 1)) && !use_dma && !ret); + } while ((idx++ < (num - 1)) && !ret); if (!ret) ret = qup_i2c_change_state(qup, QUP_RESET_STATE);
1. Assigns use_dma in qup_dev structure itself which will help in subsequent patches to determine the mode in IRQ handler. 2. Does minor code reorganization for loops to reduce the unnecessary comparison and assignment. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> --- drivers/i2c/busses/i2c-qup.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)