Message ID | 1553513800-27611-3-git-send-email-c-hbandi@codeaurora.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Enable Bluetooth functionality for WCN3998. | expand |
On Mon, Mar 25, 2019 at 05:06:40PM +0530, Harish Bandi wrote: > This patch enables regulators for the Qualcomm Bluetooth WCN3998 > controller. > > Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> > --- > Changes in V4: > - Removed new compatible WCN3998 > - changed wcn3990 to wcn399* to represent wcn399* family > --- > Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt > index 824c0e2..de9cefa 100644 > --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt > +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt > @@ -11,20 +11,21 @@ Required properties: > - compatible: should contain one of the following: > * "qcom,qca6174-bt" > * "qcom,wcn3990-bt" > + * "qcom,wcn3998-bt" > > Optional properties for compatible string qcom,qca6174-bt: > > - enable-gpios: gpio specifier used to enable chip > - clocks: clock provided to the controller (SUSCLK_32KHZ) > > -Required properties for compatible string qcom,wcn3990-bt: > +Required properties for compatible string qcom,wcn399*-bt: I think in Linux drivers the use of 'x' is more common as a wildcard for a single letter than an asterisk. It is also in line with the function name in the driver, so I would suggest to keep thinkgs consistent and call it wcn399x everywhere. > > - vddio-supply: VDD_IO supply regulator handle. > - vddxo-supply: VDD_XO supply regulator handle. > - vddrf-supply: VDD_RF supply regulator handle. > - vddch0-supply: VDD_CH0 supply regulator handle. > > -Optional properties for compatible string qcom,wcn3990-bt: > +Optional properties for compatible string qcom,wcn399*-bt: > > - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt > > @@ -44,7 +45,7 @@ serial@7570000 { > > serial@898000 { > bluetooth { > - compatible = "qcom,wcn3990-bt"; > + compatible = "qcom,wcn399*-bt"; Typically wildcards aren't used in DT examples as Marcel already mentioned on v3. IMO the wildcard degrades the value of the example, rather than enhancing it. I think just listing the compatible string is enough, no need for an wcn3998/x specific example since it's essentialy the same as wcn3990. Thanks Matthias
Hi Matthias, On 2019-03-25 21:59, Matthias Kaehlcke wrote: > On Mon, Mar 25, 2019 at 05:06:40PM +0530, Harish Bandi wrote: >> This patch enables regulators for the Qualcomm Bluetooth WCN3998 >> controller. >> >> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> >> --- >> Changes in V4: >> - Removed new compatible WCN3998 >> - changed wcn3990 to wcn399* to represent wcn399* family >> --- >> Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 7 >> ++++--- >> 1 file changed, 4 insertions(+), 3 deletions(-) >> >> diff --git >> a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt >> b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt >> index 824c0e2..de9cefa 100644 >> --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt >> +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt >> @@ -11,20 +11,21 @@ Required properties: >> - compatible: should contain one of the following: >> * "qcom,qca6174-bt" >> * "qcom,wcn3990-bt" >> + * "qcom,wcn3998-bt" >> >> Optional properties for compatible string qcom,qca6174-bt: >> >> - enable-gpios: gpio specifier used to enable chip >> - clocks: clock provided to the controller (SUSCLK_32KHZ) >> >> -Required properties for compatible string qcom,wcn3990-bt: >> +Required properties for compatible string qcom,wcn399*-bt: > > I think in Linux drivers the use of 'x' is more common as a wildcard > for a single letter than an asterisk. It is also in line with the > function name in the driver, so I would suggest to keep thinkgs > consistent and call it wcn399x everywhere. [Harish] - ok, will change it to wcn399x > >> >> - vddio-supply: VDD_IO supply regulator handle. >> - vddxo-supply: VDD_XO supply regulator handle. >> - vddrf-supply: VDD_RF supply regulator handle. >> - vddch0-supply: VDD_CH0 supply regulator handle. >> >> -Optional properties for compatible string qcom,wcn3990-bt: >> +Optional properties for compatible string qcom,wcn399*-bt: >> >> - max-speed: see >> Documentation/devicetree/bindings/serial/slave-device.txt >> >> @@ -44,7 +45,7 @@ serial@7570000 { >> >> serial@898000 { >> bluetooth { >> - compatible = "qcom,wcn3990-bt"; >> + compatible = "qcom,wcn399*-bt"; > > Typically wildcards aren't used in DT examples as Marcel already > mentioned on v3. IMO the wildcard degrades the value of the example, > rather than enhancing it. I think just listing the compatible string > is enough, no need for an wcn3998/x specific example since it's > essentialy the same as wcn3990. [Harish] - So will keep as wcn3990 only here. > > Thanks > > Matthias
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt index 824c0e2..de9cefa 100644 --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt @@ -11,20 +11,21 @@ Required properties: - compatible: should contain one of the following: * "qcom,qca6174-bt" * "qcom,wcn3990-bt" + * "qcom,wcn3998-bt" Optional properties for compatible string qcom,qca6174-bt: - enable-gpios: gpio specifier used to enable chip - clocks: clock provided to the controller (SUSCLK_32KHZ) -Required properties for compatible string qcom,wcn3990-bt: +Required properties for compatible string qcom,wcn399*-bt: - vddio-supply: VDD_IO supply regulator handle. - vddxo-supply: VDD_XO supply regulator handle. - vddrf-supply: VDD_RF supply regulator handle. - vddch0-supply: VDD_CH0 supply regulator handle. -Optional properties for compatible string qcom,wcn3990-bt: +Optional properties for compatible string qcom,wcn399*-bt: - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt @@ -44,7 +45,7 @@ serial@7570000 { serial@898000 { bluetooth { - compatible = "qcom,wcn3990-bt"; + compatible = "qcom,wcn399*-bt"; vddio-supply = <&vreg_s4a_1p8>; vddxo-supply = <&vreg_l7a_1p8>;
This patch enables regulators for the Qualcomm Bluetooth WCN3998 controller. Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> --- Changes in V4: - Removed new compatible WCN3998 - changed wcn3990 to wcn399* to represent wcn399* family --- Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)