diff mbox series

[V1,1/2] ARM: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals

Message ID 1570186257-10254-2-git-send-email-kgunda@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series [V1,1/2] ARM: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals | expand

Commit Message

Kiran Gunda Oct. 4, 2019, 10:50 a.m. UTC 
Add PM6150/PM6150L peripherals such as PON, GPIOs, ADC and other
PMIC infra modules.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/pm6150.dtsi  | 82 +++++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm6150l.dtsi | 47 ++++++++++++++++++++
 2 files changed, 129 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150l.dtsi
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
new file mode 100644
index 0000000..c2389866
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -0,0 +1,82 @@ 
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+&spmi_bus {
+	pm6150_lsid0: pmic@0 {
+		compatible = "qcom,pm6150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pm6150_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6150_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			adc-chan@ADC5_DIE_TEMP {
+				reg = <ADC5_DIE_TEMP>;
+				label = "die_temp";
+			};
+		};
+
+		pm6150_gpio: gpios@c000 {
+			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000 0xa00>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>,
+				     <0 0xc4 0 IRQ_TYPE_NONE>,
+				     <0 0xc5 0 IRQ_TYPE_NONE>,
+				     <0 0xc6 0 IRQ_TYPE_NONE>,
+				     <0 0xc7 0 IRQ_TYPE_NONE>;
+
+			interrupt-names = "pm6150_gpio1", "pm6150_gpio2",
+					"pm6150_gpio3", "pm6150_gpio4",
+					"pm6150_gpio5", "pm6150_gpio6",
+					"pm6150_gpio7", "pm6150_gpio8";
+		};
+	};
+
+	pm6150_lsid1: pmic@1 {
+		compatible = "qcom,pm6150", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
new file mode 100644
index 0000000..a262092
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -0,0 +1,47 @@ 
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm6150l_lsid4: pmic@4 {
+		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150l_gpios: gpios@c000 {
+			compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
+			reg = <0xc000 0xc00>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <4 0xc0 0 IRQ_TYPE_NONE>,
+				     <4 0xc1 0 IRQ_TYPE_NONE>,
+				     <4 0xc2 0 IRQ_TYPE_NONE>,
+				     <4 0xc3 0 IRQ_TYPE_NONE>,
+				     <4 0xc4 0 IRQ_TYPE_NONE>,
+				     <4 0xc5 0 IRQ_TYPE_NONE>,
+				     <4 0xc6 0 IRQ_TYPE_NONE>,
+				     <4 0xc7 0 IRQ_TYPE_NONE>,
+				     <4 0xc8 0 IRQ_TYPE_NONE>,
+				     <4 0xc9 0 IRQ_TYPE_NONE>,
+				     <4 0xca 0 IRQ_TYPE_NONE>,
+				     <4 0xcb 0 IRQ_TYPE_NONE>;
+
+			interrupt-names = "pm6150l_gpio1", "pm6150l_gpio2",
+					"pm6150l_gpio3", "pm6150l_gpio4",
+					"pm6150l_gpio5", "pm6150l_gpio6",
+					"pm6150l_gpio7", "pm6150l_gpio8",
+					"pm6150l_gpio9", "pm6150l_gpio10",
+					"pm6150l_gpio11", "pm6150l_gpio12";
+		};
+	};
+
+	pm6150l_lsid5: pmic@5 {
+		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};