| Message ID | 1570188039-22122-1-git-send-email-kgunda@codeaurora.org (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Commit | b587c30a5f29ad24f0175089af374dedfcadc495 |
| Headers | show |
| Series | [V1] dt-bindings: pinctrl: qcom-pmic-gpio: Add support for pm6150/pm6150l | expand |
On Fri 04 Oct 04:20 PDT 2019, Kiran Gunda wrote: > Add support for the PM6150 and PM6150L GPIO support to the > Qualcomm PMIC GPIO binding. > > Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 4 ++++ > drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++ > 2 files changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt > index c32bf32..2f48cca 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt > @@ -23,6 +23,8 @@ PMIC's from Qualcomm. > "qcom,pms405-gpio" > "qcom,pm8150-gpio" > "qcom,pm8150b-gpio" > + "qcom,pm6150-gpio" > + "qcom,pm6150l-gpio" > > And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" > if the device is on an spmi bus or an ssbi bus respectively > @@ -100,6 +102,8 @@ to specify in a pin configuration subnode: > and gpio8) > gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7) > gpio1-gpio12 for pm8150l (hole on gpio7) > + gpio1-gpio10 for pm6150 > + gpio1-gpio12 for pm6150l > > - function: > Usage: required > diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > index f1fece5..387917c 100644 > --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > @@ -1121,6 +1121,8 @@ static int pmic_gpio_remove(struct platform_device *pdev) > { .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 }, > /* pm8150l has 12 GPIOs with holes on 7 */ > { .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 }, > + { .compatible = "qcom,pm6150-gpio", .data = (void *) 10 }, > + { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 }, > { }, > }; > > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
On Fri, Oct 4, 2019 at 1:20 PM Kiran Gunda <kgunda@codeaurora.org> wrote: > Add support for the PM6150 and PM6150L GPIO support to the > Qualcomm PMIC GPIO binding. > > Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Patch applied. Yours, Linus Walleij
On 04-10-19, 16:50, Kiran Gunda wrote: > Add support for the PM6150 and PM6150L GPIO support to the > Qualcomm PMIC GPIO binding. > > Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> > --- > Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 4 ++++ > drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++ > 2 files changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt > index c32bf32..2f48cca 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt > @@ -23,6 +23,8 @@ PMIC's from Qualcomm. > "qcom,pms405-gpio" > "qcom,pm8150-gpio" > "qcom,pm8150b-gpio" > + "qcom,pm6150-gpio" > + "qcom,pm6150l-gpio" > > And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" > if the device is on an spmi bus or an ssbi bus respectively > @@ -100,6 +102,8 @@ to specify in a pin configuration subnode: > and gpio8) > gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7) > gpio1-gpio12 for pm8150l (hole on gpio7) > + gpio1-gpio10 for pm6150 > + gpio1-gpio12 for pm6150l No holes on these? Other than this: Reviewed-by: Vinod Koul <vkoul@kernel.org> > > - function: > Usage: required > diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > index f1fece5..387917c 100644 > --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > @@ -1121,6 +1121,8 @@ static int pmic_gpio_remove(struct platform_device *pdev) > { .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 }, > /* pm8150l has 12 GPIOs with holes on 7 */ > { .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 }, > + { .compatible = "qcom,pm6150-gpio", .data = (void *) 10 }, > + { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 }, > { }, > }; > > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project
On 2019-10-16 13:45, Vinod Koul wrote: > On 04-10-19, 16:50, Kiran Gunda wrote: >> Add support for the PM6150 and PM6150L GPIO support to the >> Qualcomm PMIC GPIO binding. >> >> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> >> --- >> Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 4 ++++ >> drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++ >> 2 files changed, 6 insertions(+) >> >> diff --git >> a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt >> b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt >> index c32bf32..2f48cca 100644 >> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt >> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt >> @@ -23,6 +23,8 @@ PMIC's from Qualcomm. >> "qcom,pms405-gpio" >> "qcom,pm8150-gpio" >> "qcom,pm8150b-gpio" >> + "qcom,pm6150-gpio" >> + "qcom,pm6150l-gpio" >> >> And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" >> if the device is on an spmi bus or an ssbi bus respectively >> @@ -100,6 +102,8 @@ to specify in a pin configuration subnode: >> and gpio8) >> gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7) >> gpio1-gpio12 for pm8150l (hole on gpio7) >> + gpio1-gpio10 for pm6150 >> + gpio1-gpio12 for pm6150l > > No holes on these? > Yes. No holes. > Other than this: > > Reviewed-by: Vinod Koul <vkoul@kernel.org> > >> >> - function: >> Usage: required >> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c >> b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c >> index f1fece5..387917c 100644 >> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c >> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c >> @@ -1121,6 +1121,8 @@ static int pmic_gpio_remove(struct >> platform_device *pdev) >> { .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 }, >> /* pm8150l has 12 GPIOs with holes on 7 */ >> { .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 }, >> + { .compatible = "qcom,pm6150-gpio", .data = (void *) 10 }, >> + { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 }, >> { }, >> }; >> >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora >> Forum, >> a Linux Foundation Collaborative Project
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index c32bf32..2f48cca 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -23,6 +23,8 @@ PMIC's from Qualcomm. "qcom,pms405-gpio" "qcom,pm8150-gpio" "qcom,pm8150b-gpio" + "qcom,pm6150-gpio" + "qcom,pm6150l-gpio" And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" if the device is on an spmi bus or an ssbi bus respectively @@ -100,6 +102,8 @@ to specify in a pin configuration subnode: and gpio8) gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7) gpio1-gpio12 for pm8150l (hole on gpio7) + gpio1-gpio10 for pm6150 + gpio1-gpio12 for pm6150l - function: Usage: required diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index f1fece5..387917c 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -1121,6 +1121,8 @@ static int pmic_gpio_remove(struct platform_device *pdev) { .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 }, /* pm8150l has 12 GPIOs with holes on 7 */ { .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 }, + { .compatible = "qcom,pm6150-gpio", .data = (void *) 10 }, + { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 }, { }, };
Add support for the PM6150 and PM6150L GPIO support to the Qualcomm PMIC GPIO binding. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> --- Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 4 ++++ drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++ 2 files changed, 6 insertions(+)