[RFC,02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs

Message ID	1572378065-4490-3-git-send-email-eberman@codeaurora.org (mailing list archive)
State	Superseded
Headers	show Return-Path: <SRS0=qXSu=YW=vger.kernel.org=linux-arm-msm-owner@kernel.org> sender: eberman@smtp.codeaurora.org) by smtp.codeaurora.org (Postfix) with ESMTPSA id E96A360F36; Tue, 29 Oct 2019 19:41:11 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org E96A360F36 From: Elliot Berman <eberman@codeaurora.org> To: bjorn.andersson@linaro.org, saipraka@codeaurora.org, agross@kernel.org Cc: tsoni@codeaurora.org, sidgup@codeaurora.org, psodagud@codeaurora.org, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, Elliot Berman <eberman@codeaurora.org> Subject: [RFC 02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs Date: Tue, 29 Oct 2019 12:40:50 -0700 Message-Id: <1572378065-4490-3-git-send-email-eberman@codeaurora.org> In-Reply-To: <1572378065-4490-1-git-send-email-eberman@codeaurora.org> References: <1572378065-4490-1-git-send-email-eberman@codeaurora.org> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk
Series	Restructure, improve target support for qcom_scm driver \| expand [RFC,00/17] Restructure, improve target support for qcom_scm driver [RFC,01/17] firmware: qcom_scm: Rename macros and structures [RFC,02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs [RFC,03/17] firmware: qcom_scm: Order functions, definitions by service/command [RFC,04/17] firmware: qcom_scm: Remove unused qcom_scm_get_version [RFC,05/17] firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc [RFC,06/17] firmware: qcom_scm-64: Add SCM results to descriptor [RFC,07/17] firmware: qcom_scm-64: Remove qcom_scm_call_do_smccc [RFC,08/17] firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc [RFC,09/17] firmware: qcom_scm-64: Improve SMC convention detection [RFC,10/17] firmware: qcom_scm-32: Use SMC arch wrappers [RFC,11/17] firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls [RFC,12/17] firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call [RFC,13/17] firmware: qcom_scm-32: Create common legacy atomic call [RFC,14/17] firmware: qcom_scm-32: Add device argument to atomic calls [RFC,15/17] firmware: qcom_scm: Merge legacy and SMCCC conventions [RFC,16/17] firmware: qcom_scm: Enable legacy calling convention in qcom_scm-64.c [RFC,17/17] firmware: qcom_scm: Rename -64 -> -smc, remove -32

diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c index d416efc..dee2129 100644 --- a/drivers/firmware/qcom_scm-32.c +++ b/drivers/firmware/qcom_scm-32.c @@ -356,7 +356,7 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus) set_cpu_present(cpu, false); } - return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR, + return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_ADDR, flags, virt_to_phys(entry)); } @@ -395,7 +395,7 @@ int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry, cmd.addr = cpu_to_le32(virt_to_phys(entry)); cmd.flags = cpu_to_le32(flags); - ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR, + ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_ADDR, &cmd, sizeof(cmd), NULL, 0); if (!ret) { for_each_cpu(cpu, cpus) @@ -415,7 +415,7 @@ int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry, */ void __qcom_scm_cpu_power_down(u32 flags) { - qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC, + qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_TERMINATE_PC, flags & QCOM_SCM_FLUSH_FLAG_MASK); } @@ -425,7 +425,7 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id) __le32 svc_cmd = cpu_to_le32((svc_id << 10) | cmd_id); __le32 ret_val = 0; - ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, + ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_INFO_IS_CALL_AVAIL, &svc_cmd, sizeof(svc_cmd), &ret_val, sizeof(ret_val)); if (ret) @@ -440,7 +440,7 @@ int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req, if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT) return -ERANGE; - return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, + return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_HDCP_INVOKE, req, req_cnt * sizeof(*req), resp, sizeof(*resp)); } @@ -456,7 +456,7 @@ bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral) in = cpu_to_le32(peripheral); ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, - QCOM_SCM_PAS_IS_SUPPORTED_CMD, + QCOM_SCM_PIL_PAS_IS_SUPPORTED, &in, sizeof(in), &out, sizeof(out)); @@ -477,7 +477,7 @@ int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral, request.image_addr = cpu_to_le32(metadata_phys); ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, - QCOM_SCM_PAS_INIT_IMAGE_CMD, + QCOM_SCM_PIL_PAS_INIT_IMAGE, &request, sizeof(request), &scm_ret, sizeof(scm_ret)); @@ -500,7 +500,7 @@ int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral, request.len = cpu_to_le32(size); ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, - QCOM_SCM_PAS_MEM_SETUP_CMD, + QCOM_SCM_PIL_PAS_MEM_SETUP, &request, sizeof(request), &scm_ret, sizeof(scm_ret)); @@ -515,7 +515,7 @@ int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral) in = cpu_to_le32(peripheral); ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, - QCOM_SCM_PAS_AUTH_AND_RESET_CMD, + QCOM_SCM_PIL_PAS_AUTH_AND_RESET, &in, sizeof(in), &out, sizeof(out)); @@ -530,7 +530,7 @@ int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral) in = cpu_to_le32(peripheral); ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, - QCOM_SCM_PAS_SHUTDOWN_CMD, + QCOM_SCM_PIL_PAS_SHUTDOWN, &in, sizeof(in), &out, sizeof(out)); @@ -543,7 +543,7 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset) __le32 in = cpu_to_le32(reset); int ret; - ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET, + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MSS_RESET, &in, sizeof(in), &out, sizeof(out)); @@ -552,8 +552,8 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset) int __qcom_scm_set_dload_mode(struct device *dev, bool enable) { - return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_DLOAD_MODE, - enable ? QCOM_SCM_SET_DLOAD_MODE : 0, 0); + return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_DLOAD_MODE, + enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0, 0); } int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id) @@ -568,7 +568,7 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id) req.state = cpu_to_le32(state); req.id = cpu_to_le32(id); - ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_REMOTE_STATE, + ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_REMOTE_STATE, &req, sizeof(req), &scm_ret, sizeof(scm_ret)); return ret ? : le32_to_cpu(scm_ret); diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c index e6721b5..520925d 100644 --- a/drivers/firmware/qcom_scm-64.c +++ b/drivers/firmware/qcom_scm-64.c @@ -256,7 +256,7 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id) desc.args[0] = SMCCC_FUNCNUM(svc_id, cmd_id) | (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT); - ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, + ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_INFO_IS_CALL_AVAIL, &desc, &res); return ret ? : res.a1; @@ -284,7 +284,7 @@ int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req, desc.args[9] = req[4].val; desc.arginfo = QCOM_SCM_ARGS(10); - ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, &desc, + ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_HDCP_INVOKE, &desc, &res); *resp = res.a1; @@ -295,7 +295,7 @@ void __qcom_scm_init(void) { u64 cmd; struct arm_smccc_res res; - u32 function = SMCCC_FUNCNUM(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD); + u32 function = SMCCC_FUNCNUM(QCOM_SCM_SVC_INFO, QCOM_INFO_IS_CALL_AVAIL); /* First try a SMC64 call */ cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, @@ -320,7 +320,7 @@ bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral) desc.arginfo = QCOM_SCM_ARGS(1); ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, - QCOM_SCM_PAS_IS_SUPPORTED_CMD, + QCOM_SCM_PIL_PAS_IS_SUPPORTED, &desc, &res); return ret ? false : !!res.a1; @@ -337,7 +337,7 @@ int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral, desc.args[1] = metadata_phys; desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW); - ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_INIT_IMAGE_CMD, + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_INIT_IMAGE, &desc, &res); return ret ? : res.a1; @@ -355,7 +355,7 @@ int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral, desc.args[2] = size; desc.arginfo = QCOM_SCM_ARGS(3); - ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MEM_SETUP_CMD, + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MEM_SETUP, &desc, &res); return ret ? : res.a1; @@ -371,7 +371,7 @@ int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral) desc.arginfo = QCOM_SCM_ARGS(1); ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, - QCOM_SCM_PAS_AUTH_AND_RESET_CMD, + QCOM_SCM_PIL_PAS_AUTH_AND_RESET, &desc, &res); return ret ? : res.a1; @@ -386,7 +386,7 @@ int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral) desc.args[0] = peripheral; desc.arginfo = QCOM_SCM_ARGS(1); - ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_SHUTDOWN_CMD, + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_SHUTDOWN, &desc, &res); return ret ? : res.a1; @@ -402,7 +402,7 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset) desc.args[1] = 0; desc.arginfo = QCOM_SCM_ARGS(2); - ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET, &desc, + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MSS_RESET, &desc, &res); return ret ? : res.a1; @@ -418,7 +418,7 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id) desc.args[1] = id; desc.arginfo = QCOM_SCM_ARGS(2); - ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_REMOTE_STATE, + ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_REMOTE_STATE, &desc, &res); return ret ? : res.a1; @@ -445,7 +445,7 @@ int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region, QCOM_SCM_VAL, QCOM_SCM_VAL); ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, - QCOM_MEM_PROT_ASSIGN_ID, + QCOM_MP_ASSIGN, &desc, &res); return ret ? : res.a1; @@ -461,7 +461,7 @@ int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare) desc.args[1] = spare; desc.arginfo = QCOM_SCM_ARGS(2); - ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_RESTORE_SEC_CFG, + ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_MP_RESTORE_SEC_CFG, &desc, &res); return ret ? : res.a1; @@ -478,7 +478,7 @@ int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare, desc.arginfo = QCOM_SCM_ARGS(1); ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, - QCOM_SCM_IOMMU_SECURE_PTBL_SIZE, &desc, &res); + QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE, &desc, &res); if (size) *size = res.a1; @@ -500,7 +500,7 @@ int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size, QCOM_SCM_VAL); ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, - QCOM_SCM_IOMMU_SECURE_PTBL_INIT, &desc, &res); + QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT, &desc, &res); /* the pg table has been initialized already, ignore the error */ if (ret == -EPERM) @@ -514,11 +514,11 @@ int __qcom_scm_set_dload_mode(struct device *dev, bool enable) struct qcom_scm_desc desc = {0}; struct arm_smccc_res res; - desc.args[0] = QCOM_SCM_SET_DLOAD_MODE; - desc.args[1] = enable ? QCOM_SCM_SET_DLOAD_MODE : 0; + desc.args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE; + desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0; desc.arginfo = QCOM_SCM_ARGS(2); - return qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_DLOAD_MODE, + return qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_DLOAD_MODE, &desc, &res); } @@ -558,10 +558,10 @@ int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool en) struct qcom_scm_desc desc = {0}; struct arm_smccc_res res; - desc.args[0] = QCOM_SCM_CONFIG_ERRATA1_CLIENT_ALL; + desc.args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL; desc.args[1] = en; desc.arginfo = QCOM_SCM_ARGS(2); return qcom_scm_call_atomic(dev, QCOM_SCM_SVC_SMMU_PROGRAM, - QCOM_SCM_CONFIG_ERRATA1, &desc, &res); + QCOM_SCM_SMMU_CONFIG_ERRATA1, &desc, &res); } diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index f83b94d..0fc5c94 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -142,7 +142,7 @@ bool qcom_scm_hdcp_available(void) return ret; ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP, - QCOM_SCM_CMD_HDCP); + QCOM_SCM_HDCP_INVOKE); qcom_scm_clk_disable(); @@ -183,7 +183,7 @@ bool qcom_scm_pas_supported(u32 peripheral) int ret; ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL, - QCOM_SCM_PAS_IS_SUPPORTED_CMD); + QCOM_SCM_PIL_PAS_IS_SUPPORTED); if (ret <= 0) return false; @@ -370,12 +370,12 @@ static void qcom_scm_set_download_mode(bool enable) avail = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_BOOT, - QCOM_SCM_SET_DLOAD_MODE); + QCOM_SCM_BOOT_SET_DLOAD_MODE); if (avail) { ret = __qcom_scm_set_dload_mode(__scm->dev, enable); } else if (__scm->dload_mode_addr) { ret = __qcom_scm_io_writel(__scm->dev, __scm->dload_mode_addr, - enable ? QCOM_SCM_SET_DLOAD_MODE : 0); + enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0); } else { dev_err(__scm->dev, "No available mechanism for setting download mode\n"); diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h index 3c7b74d..7bc8566 100644 --- a/drivers/firmware/qcom_scm.h +++ b/drivers/firmware/qcom_scm.h @@ -5,23 +5,18 @@ #define __QCOM_SCM_INT_H #define QCOM_SCM_SVC_BOOT 0x1 -#define QCOM_SCM_BOOT_ADDR 0x1 -#define QCOM_SCM_SET_DLOAD_MODE 0x10 -#define QCOM_SCM_BOOT_ADDR_MC 0x11 -#define QCOM_SCM_SET_REMOTE_STATE 0xa +#define QCOM_SCM_BOOT_SET_ADDR 0x1 +#define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10 +#define QCOM_SCM_BOOT_SET_REMOTE_STATE 0xa extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id); extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable); -#define QCOM_SCM_FLAG_HLOS 0x01 -#define QCOM_SCM_FLAG_COLDBOOT_MC 0x02 -#define QCOM_SCM_FLAG_WARMBOOT_MC 0x04 extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry, const cpumask_t *cpus); extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus); -#define QCOM_SCM_CMD_TERMINATE_PC 0x2 +#define QCOM_SCM_BOOT_TERMINATE_PC 0x2 #define QCOM_SCM_FLUSH_FLAG_MASK 0x3 -#define QCOM_SCM_CMD_CORE_HOTPLUGGED 0x10 extern void __qcom_scm_cpu_power_down(u32 flags); #define QCOM_SCM_SVC_IO 0x5 @@ -31,24 +26,24 @@ extern int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr, unsigned in extern int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val); #define QCOM_SCM_SVC_INFO 0x6 -#define QCOM_IS_CALL_AVAIL_CMD 0x1 +#define QCOM_INFO_IS_CALL_AVAIL 0x1 extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id); #define QCOM_SCM_SVC_HDCP 0x11 -#define QCOM_SCM_CMD_HDCP 0x01 +#define QCOM_SCM_HDCP_INVOKE 0x01 extern int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp); extern void __qcom_scm_init(void); #define QCOM_SCM_SVC_PIL 0x2 -#define QCOM_SCM_PAS_INIT_IMAGE_CMD 0x1 -#define QCOM_SCM_PAS_MEM_SETUP_CMD 0x2 -#define QCOM_SCM_PAS_AUTH_AND_RESET_CMD 0x5 -#define QCOM_SCM_PAS_SHUTDOWN_CMD 0x6 -#define QCOM_SCM_PAS_IS_SUPPORTED_CMD 0x7 -#define QCOM_SCM_PAS_MSS_RESET 0xa +#define QCOM_SCM_PIL_PAS_INIT_IMAGE 0x1 +#define QCOM_SCM_PIL_PAS_MEM_SETUP 0x2 +#define QCOM_SCM_PIL_PAS_AUTH_AND_RESET 0x5 +#define QCOM_SCM_PIL_PAS_SHUTDOWN 0x6 +#define QCOM_SCM_PIL_PAS_IS_SUPPORTED 0x7 +#define QCOM_SCM_PIL_PAS_MSS_RESET 0xa extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral); extern int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral, dma_addr_t metadata_phys); @@ -86,21 +81,21 @@ static inline int qcom_scm_remap_error(int err) } #define QCOM_SCM_SVC_MP 0xc -#define QCOM_SCM_RESTORE_SEC_CFG 2 +#define QCOM_SCM_MP_RESTORE_SEC_CFG 2 extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare); -#define QCOM_SCM_IOMMU_SECURE_PTBL_SIZE 3 -#define QCOM_SCM_IOMMU_SECURE_PTBL_INIT 4 +#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE 3 +#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT 4 #define QCOM_SCM_SVC_SMMU_PROGRAM 0x15 -#define QCOM_SCM_CONFIG_ERRATA1 0x3 -#define QCOM_SCM_CONFIG_ERRATA1_CLIENT_ALL 0x2 +#define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x3 +#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x2 extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare, size_t *size); extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size, u32 spare); extern int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool enable); -#define QCOM_MEM_PROT_ASSIGN_ID 0x16 +#define QCOM_MP_ASSIGN 0x16 extern int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region, size_t mem_sz, phys_addr_t src, size_t src_sz,

[RFC,02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs

Commit Message

Patch