@@ -37,19 +37,6 @@ struct qcom_scm {
u64 dload_mode_addr;
};
-struct qcom_scm_current_perm_info {
- __le32 vmid;
- __le32 perm;
- __le64 ctx;
- __le32 ctx_size;
- __le32 unused;
-};
-
-struct qcom_scm_mem_map_info {
- __le64 mem_addr;
- __le64 mem_size;
-};
-
static struct qcom_scm *__scm;
static int qcom_scm_clk_enable(void)
@@ -166,36 +153,6 @@ static int qcom_scm_call_atomic(struct device *dev, struct qcom_scm_desc *desc)
}
}
-static int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
- u32 cmd_id)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_INFO,
- .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
-
- desc.arginfo = QCOM_SCM_ARGS(1);
- switch (__get_convention()) {
- case SMC_CONVENTION_ARM_32:
- case SMC_CONVENTION_ARM_64:
- desc.args[0] = SMCCC_FUNCNUM(svc_id, cmd_id) |
- (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
- break;
- case SMC_CONVENTION_LEGACY:
- desc.args[0] = LEGACY_FUNCNUM(svc_id, cmd_id);
- break;
- default:
- pr_err("Unknown SMC convention being used\n");
- return -EINVAL;
- }
-
- ret = qcom_scm_call(dev, &desc);
-
- return ret ? : desc.result[0];
-}
-
#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
@@ -306,6 +263,8 @@ int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
}
EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
+#define QCOM_SCM_FLUSH_FLAG_MASK 0x03
+
/**
* qcom_scm_cpu_power_down() - Power down the cpu
* @flags - Flags to flush cache
@@ -328,101 +287,61 @@ void qcom_scm_cpu_power_down(u32 flags)
}
EXPORT_SYMBOL(qcom_scm_cpu_power_down);
-/**
- * qcom_scm_hdcp_available() - Check if secure environment supports HDCP.
- *
- * Return true if HDCP is supported, false if not.
- */
-bool qcom_scm_hdcp_available(void)
-{
- int ret = qcom_scm_clk_enable();
-
- if (ret)
- return ret;
-
- ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
- QCOM_SCM_HDCP_INVOKE);
-
- qcom_scm_clk_disable();
-
- return ret > 0 ? true : false;
-}
-EXPORT_SYMBOL(qcom_scm_hdcp_available);
-
-/**
- * qcom_scm_hdcp_req() - Send HDCP request.
- * @req: HDCP request array
- * @req_cnt: HDCP request array count
- * @resp: response buffer passed to SCM
- *
- * Write HDCP register(s) through SCM.
- */
-int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+int qcom_scm_set_remote_state(u32 state, u32 id)
{
- int ret;
struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_HDCP,
- .cmd = QCOM_SCM_HDCP_INVOKE,
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
.owner = ARM_SMCCC_OWNER_SIP,
};
+ int ret;
- if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
- return -ERANGE;
-
- ret = qcom_scm_clk_enable();
- if (ret)
- return ret;
-
- desc.args[0] = req[0].addr;
- desc.args[1] = req[0].val;
- desc.args[2] = req[1].addr;
- desc.args[3] = req[1].val;
- desc.args[4] = req[2].addr;
- desc.args[5] = req[2].val;
- desc.args[6] = req[3].addr;
- desc.args[7] = req[3].val;
- desc.args[8] = req[4].addr;
- desc.args[9] = req[4].val;
- desc.arginfo = QCOM_SCM_ARGS(10);
+ desc.args[0] = state;
+ desc.args[1] = id;
+ desc.arginfo = QCOM_SCM_ARGS(2);
ret = qcom_scm_call(__scm->dev, &desc);
- *resp = desc.result[0];
-
- qcom_scm_clk_disable();
- return ret;
+ return ret ? : desc.result[0];
}
-EXPORT_SYMBOL(qcom_scm_hdcp_req);
+EXPORT_SYMBOL(qcom_scm_set_remote_state);
-/**
- * qcom_scm_pas_supported() - Check if the peripheral authentication service is
- * available for the given peripherial
- * @peripheral: peripheral id
- *
- * Returns true if PAS is supported for this peripheral, otherwise false.
- */
-bool qcom_scm_pas_supported(u32 peripheral)
+static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
{
- int ret;
struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE,
.owner = ARM_SMCCC_OWNER_SIP,
};
- ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PIL_PAS_IS_SUPPORTED);
- if (ret <= 0)
- return false;
+ desc.args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE;
+ desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
+ desc.arginfo = QCOM_SCM_ARGS(2);
- desc.args[0] = peripheral;
- desc.arginfo = QCOM_SCM_ARGS(1);
+ return qcom_scm_call(__scm->dev, &desc);
+}
- ret = qcom_scm_call(__scm->dev, &desc);
+static void qcom_scm_set_download_mode(bool enable)
+{
+ bool avail;
+ int ret = 0;
- return ret ? false : !!desc.result[0];
+ avail = __qcom_scm_is_call_available(__scm->dev,
+ QCOM_SCM_SVC_BOOT,
+ QCOM_SCM_BOOT_SET_DLOAD_MODE);
+ if (avail) {
+ ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
+ } else if (__scm->dload_mode_addr) {
+ ret = qcom_scm_io_writel(__scm->dload_mode_addr,
+ enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
+ } else {
+ dev_err(__scm->dev,
+ "No available mechanism for setting download mode\n");
+ }
+
+ if (ret)
+ dev_err(__scm->dev, "failed to set download mode: %d\n", ret);
}
-EXPORT_SYMBOL(qcom_scm_pas_supported);
/**
* qcom_scm_pas_init_image() - Initialize peripheral authentication service
@@ -569,6 +488,36 @@ int qcom_scm_pas_shutdown(u32 peripheral)
}
EXPORT_SYMBOL(qcom_scm_pas_shutdown);
+/**
+ * qcom_scm_pas_supported() - Check if the peripheral authentication service is
+ * available for the given peripherial
+ * @peripheral: peripheral id
+ *
+ * Returns true if PAS is supported for this peripheral, otherwise false.
+ */
+bool qcom_scm_pas_supported(u32 peripheral)
+{
+ int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PIL_PAS_IS_SUPPORTED);
+ if (ret <= 0)
+ return false;
+
+ desc.args[0] = peripheral;
+ desc.arginfo = QCOM_SCM_ARGS(1);
+
+ ret = qcom_scm_call(__scm->dev, &desc);
+
+ return ret ? false : !!desc.result[0];
+}
+EXPORT_SYMBOL(qcom_scm_pas_supported);
+
static int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
{
struct qcom_scm_desc desc = {
@@ -610,6 +559,72 @@ static const struct reset_control_ops qcom_scm_pas_reset_ops = {
.deassert = qcom_scm_pas_reset_deassert,
};
+int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
+{
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_IO,
+ .cmd = QCOM_SCM_IO_READ,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ int ret;
+
+ desc.args[0] = addr;
+ desc.arginfo = QCOM_SCM_ARGS(1);
+
+ ret = qcom_scm_call(__scm->dev, &desc);
+ if (ret >= 0)
+ *val = desc.result[0];
+
+ return ret < 0 ? ret : 0;
+}
+EXPORT_SYMBOL(qcom_scm_io_readl);
+
+int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
+{
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_IO,
+ .cmd = QCOM_SCM_IO_WRITE,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ desc.args[0] = addr;
+ desc.args[1] = val;
+ desc.arginfo = QCOM_SCM_ARGS(2);
+
+ return qcom_scm_call(__scm->dev, &desc);
+}
+EXPORT_SYMBOL(qcom_scm_io_writel);
+
+static int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
+ u32 cmd_id)
+{
+ int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_INFO,
+ .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ desc.arginfo = QCOM_SCM_ARGS(1);
+ switch (__get_convention()) {
+ case SMC_CONVENTION_ARM_32:
+ case SMC_CONVENTION_ARM_64:
+ desc.args[0] = SMCCC_FUNCNUM(svc_id, cmd_id) |
+ (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
+ break;
+ case SMC_CONVENTION_LEGACY:
+ desc.args[0] = LEGACY_FUNCNUM(svc_id, cmd_id);
+ break;
+ default:
+ pr_err("Unknown SMC convention being used\n");
+ return -EINVAL;
+ }
+
+ ret = qcom_scm_call(dev, &desc);
+
+ return ret ? : desc.result[0];
+}
+
int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
{
struct qcom_scm_desc desc = {
@@ -675,148 +690,18 @@ int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
}
EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_init);
-int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_SMMU_PROGRAM,
- .cmd = QCOM_SCM_SMMU_CONFIG_ERRATA1,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
-
- desc.args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL;
- desc.args[1] = en;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call_atomic(__scm->dev, &desc);
-}
-EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);
-
-int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_IO,
- .cmd = QCOM_SCM_IO_READ,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- int ret;
-
- desc.args[0] = addr;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(__scm->dev, &desc);
- if (ret >= 0)
- *val = desc.result[0];
-
- return ret < 0 ? ret : 0;
-}
-EXPORT_SYMBOL(qcom_scm_io_readl);
-
-int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_IO,
- .cmd = QCOM_SCM_IO_WRITE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
-
- desc.args[0] = addr;
- desc.args[1] = val;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call(__scm->dev, &desc);
-}
-EXPORT_SYMBOL(qcom_scm_io_writel);
-
-static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
-
- desc.args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE;
- desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call(__scm->dev, &desc);
-}
-
-static void qcom_scm_set_download_mode(bool enable)
-{
- bool avail;
- int ret = 0;
-
- avail = __qcom_scm_is_call_available(__scm->dev,
- QCOM_SCM_SVC_BOOT,
- QCOM_SCM_BOOT_SET_DLOAD_MODE);
- if (avail) {
- ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
- } else if (__scm->dload_mode_addr) {
- ret = qcom_scm_io_writel(__scm->dload_mode_addr,
- enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
- } else {
- dev_err(__scm->dev,
- "No available mechanism for setting download mode\n");
- }
-
- if (ret)
- dev_err(__scm->dev, "failed to set download mode: %d\n", ret);
-}
-
-static int qcom_scm_find_dload_address(struct device *dev, u64 *addr)
-{
- struct device_node *tcsr;
- struct device_node *np = dev->of_node;
- struct resource res;
- u32 offset;
- int ret;
-
- tcsr = of_parse_phandle(np, "qcom,dload-mode", 0);
- if (!tcsr)
- return 0;
-
- ret = of_address_to_resource(tcsr, 0, &res);
- of_node_put(tcsr);
- if (ret)
- return ret;
-
- ret = of_property_read_u32_index(np, "qcom,dload-mode", 1, &offset);
- if (ret < 0)
- return ret;
-
- *addr = res.start + offset;
-
- return 0;
-}
-
-/**
- * qcom_scm_is_available() - Checks if SCM is available
- */
-bool qcom_scm_is_available(void)
-{
- return !!__scm;
-}
-EXPORT_SYMBOL(qcom_scm_is_available);
-
-int qcom_scm_set_remote_state(u32 state, u32 id)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- int ret;
-
- desc.args[0] = state;
- desc.args[1] = id;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- ret = qcom_scm_call(__scm->dev, &desc);
+struct qcom_scm_current_perm_info {
+ __le32 vmid;
+ __le32 perm;
+ __le64 ctx;
+ __le32 ctx_size;
+ __le32 unused;
+};
- return ret ? : desc.result[0];
-}
-EXPORT_SYMBOL(qcom_scm_set_remote_state);
+struct qcom_scm_mem_map_info {
+ __le64 mem_addr;
+ __le64 mem_size;
+};
static int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
size_t mem_sz, phys_addr_t src, size_t src_sz,
@@ -928,6 +813,125 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
}
EXPORT_SYMBOL(qcom_scm_assign_mem);
+/**
+ * qcom_scm_hdcp_available() - Check if secure environment supports HDCP.
+ *
+ * Return true if HDCP is supported, false if not.
+ */
+bool qcom_scm_hdcp_available(void)
+{
+ int ret = qcom_scm_clk_enable();
+
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
+ QCOM_SCM_HDCP_INVOKE);
+
+ qcom_scm_clk_disable();
+
+ return ret > 0 ? true : false;
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_available);
+
+/**
+ * qcom_scm_hdcp_req() - Send HDCP request.
+ * @req: HDCP request array
+ * @req_cnt: HDCP request array count
+ * @resp: response buffer passed to SCM
+ *
+ * Write HDCP register(s) through SCM.
+ */
+int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+ int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_HDCP,
+ .cmd = QCOM_SCM_HDCP_INVOKE,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
+ return -ERANGE;
+
+ ret = qcom_scm_clk_enable();
+ if (ret)
+ return ret;
+
+ desc.args[0] = req[0].addr;
+ desc.args[1] = req[0].val;
+ desc.args[2] = req[1].addr;
+ desc.args[3] = req[1].val;
+ desc.args[4] = req[2].addr;
+ desc.args[5] = req[2].val;
+ desc.args[6] = req[3].addr;
+ desc.args[7] = req[3].val;
+ desc.args[8] = req[4].addr;
+ desc.args[9] = req[4].val;
+ desc.arginfo = QCOM_SCM_ARGS(10);
+
+ ret = qcom_scm_call(__scm->dev, &desc);
+ *resp = desc.result[0];
+
+
+ qcom_scm_clk_disable();
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_req);
+
+#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x02
+int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
+{
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_SMMU_PROGRAM,
+ .cmd = QCOM_SCM_SMMU_CONFIG_ERRATA1,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ desc.args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL;
+ desc.args[1] = en;
+ desc.arginfo = QCOM_SCM_ARGS(2);
+
+ return qcom_scm_call_atomic(__scm->dev, &desc);
+}
+EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);
+
+static int qcom_scm_find_dload_address(struct device *dev, u64 *addr)
+{
+ struct device_node *tcsr;
+ struct device_node *np = dev->of_node;
+ struct resource res;
+ u32 offset;
+ int ret;
+
+ tcsr = of_parse_phandle(np, "qcom,dload-mode", 0);
+ if (!tcsr)
+ return 0;
+
+ ret = of_address_to_resource(tcsr, 0, &res);
+ of_node_put(tcsr);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32_index(np, "qcom,dload-mode", 1, &offset);
+ if (ret < 0)
+ return ret;
+
+ *addr = res.start + offset;
+
+ return 0;
+}
+
+/**
+ * qcom_scm_is_available() - Checks if SCM is available
+ */
+bool qcom_scm_is_available(void)
+{
+ return !!__scm;
+}
+EXPORT_SYMBOL(qcom_scm_is_available);
+
static int qcom_scm_probe(struct platform_device *pdev)
{
struct qcom_scm *scm;
@@ -62,31 +62,38 @@ extern int qcom_scm_call_legacy_atomic(struct device *dev,
struct qcom_scm_desc *desc);
extern int qcom_scm_call_legacy(struct device *dev, struct qcom_scm_desc *desc);
-#define QCOM_SCM_SVC_BOOT 0x1
-#define QCOM_SCM_BOOT_SET_ADDR 0x1
+#define QCOM_SCM_SVC_BOOT 0x01
+#define QCOM_SCM_BOOT_SET_ADDR 0x01
+#define QCOM_SCM_BOOT_TERMINATE_PC 0x02
+#define QCOM_SCM_BOOT_SET_REMOTE_STATE 0x0a
#define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10
-#define QCOM_SCM_BOOT_SET_REMOTE_STATE 0xa
-#define QCOM_SCM_BOOT_TERMINATE_PC 0x2
-#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
+#define QCOM_SCM_SVC_PIL 0x02
+#define QCOM_SCM_PIL_PAS_INIT_IMAGE 0x01
+#define QCOM_SCM_PIL_PAS_MEM_SETUP 0x02
+#define QCOM_SCM_PIL_PAS_AUTH_AND_RESET 0x05
+#define QCOM_SCM_PIL_PAS_SHUTDOWN 0x06
+#define QCOM_SCM_PIL_PAS_IS_SUPPORTED 0x07
+#define QCOM_SCM_PIL_PAS_MSS_RESET 0x0a
-#define QCOM_SCM_SVC_IO 0x5
-#define QCOM_SCM_IO_READ 0x1
-#define QCOM_SCM_IO_WRITE 0x2
+#define QCOM_SCM_SVC_IO 0x05
+#define QCOM_SCM_IO_READ 0x01
+#define QCOM_SCM_IO_WRITE 0x02
-#define QCOM_SCM_SVC_INFO 0x6
-#define QCOM_SCM_INFO_IS_CALL_AVAIL 0x1
+#define QCOM_SCM_SVC_INFO 0x06
+#define QCOM_SCM_INFO_IS_CALL_AVAIL 0x01
-#define QCOM_SCM_SVC_HDCP 0x11
-#define QCOM_SCM_HDCP_INVOKE 0x01
+#define QCOM_SCM_SVC_MP 0x0c
+#define QCOM_SCM_MP_RESTORE_SEC_CFG 0x02
+#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE 0x03
+#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT 0x04
+#define QCOM_SCM_MP_ASSIGN 0x16
-#define QCOM_SCM_SVC_PIL 0x2
-#define QCOM_SCM_PIL_PAS_INIT_IMAGE 0x1
-#define QCOM_SCM_PIL_PAS_MEM_SETUP 0x2
-#define QCOM_SCM_PIL_PAS_AUTH_AND_RESET 0x5
-#define QCOM_SCM_PIL_PAS_SHUTDOWN 0x6
-#define QCOM_SCM_PIL_PAS_IS_SUPPORTED 0x7
-#define QCOM_SCM_PIL_PAS_MSS_RESET 0xa
+#define QCOM_SCM_SVC_HDCP 0x11
+#define QCOM_SCM_HDCP_INVOKE 0x01
+
+#define QCOM_SCM_SVC_SMMU_PROGRAM 0x15
+#define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x03
/* common error codes */
#define QCOM_SCM_V2_EBUSY -12
@@ -115,13 +122,4 @@ static inline int qcom_scm_remap_error(int err)
return -EINVAL;
}
-#define QCOM_SCM_SVC_MP 0xc
-#define QCOM_SCM_MP_RESTORE_SEC_CFG 2
-#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE 3
-#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT 4
-#define QCOM_SCM_SVC_SMMU_PROGRAM 0x15
-#define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x3
-#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x2
-#define QCOM_SCM_MP_ASSIGN 0x16
-
#endif
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/* Copyright (c) 2010-2015, 2018, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2015, 2018-2019 The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*/
#ifndef __QCOM_SCM_H
@@ -35,69 +35,80 @@ struct qcom_scm_vmperm {
#define QCOM_SCM_PERM_RWX (QCOM_SCM_PERM_RW | QCOM_SCM_PERM_EXEC)
#if IS_ENABLED(CONFIG_QCOM_SCM)
+extern bool qcom_scm_is_available(void);
+
extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
-extern bool qcom_scm_is_available(void);
-extern bool qcom_scm_hdcp_available(void);
-extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
- u32 *resp);
-extern bool qcom_scm_pas_supported(u32 peripheral);
+extern void qcom_scm_cpu_power_down(u32 flags);
+extern int qcom_scm_set_remote_state(u32 state, u32 id);
+
extern int qcom_scm_pas_init_image(u32 peripheral, const void *metadata,
size_t size);
extern int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
phys_addr_t size);
extern int qcom_scm_pas_auth_and_reset(u32 peripheral);
extern int qcom_scm_pas_shutdown(u32 peripheral);
+extern bool qcom_scm_pas_supported(u32 peripheral);
+
+extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
+extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
+
+extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
+extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
+extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
extern int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
unsigned int *src,
const struct qcom_scm_vmperm *newvm,
unsigned int dest_cnt);
-extern void qcom_scm_cpu_power_down(u32 flags);
-extern int qcom_scm_set_remote_state(u32 state, u32 id);
-extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
-extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
-extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
+
+extern bool qcom_scm_hdcp_available(void);
+extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
+ u32 *resp);
+
extern int qcom_scm_qsmmu500_wait_safe_toggle(bool en);
-extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
-extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
#else
#include <linux/errno.h>
-static inline
-int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
-{
- return -ENODEV;
-}
-static inline
-int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
-{
- return -ENODEV;
-}
static inline bool qcom_scm_is_available(void) { return false; }
-static inline bool qcom_scm_hdcp_available(void) { return false; }
-static inline int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
- u32 *resp) { return -ENODEV; }
-static inline bool qcom_scm_pas_supported(u32 peripheral) { return false; }
+
+static inline int qcom_scm_set_cold_boot_addr(void *entry,
+ const cpumask_t *cpus) { return -ENODEV; }
+static inline int qcom_scm_set_warm_boot_addr(void *entry,
+ const cpumask_t *cpus) { return -ENODEV; }
+static inline void qcom_scm_cpu_power_down(u32 flags) {}
+static inline u32 qcom_scm_set_remote_state(u32 state,u32 id)
+ { return -ENODEV; }
+
static inline int qcom_scm_pas_init_image(u32 peripheral, const void *metadata,
- size_t size) { return -ENODEV; }
+ size_t size) { return -ENODEV; }
static inline int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
- phys_addr_t size) { return -ENODEV; }
-static inline int
-qcom_scm_pas_auth_and_reset(u32 peripheral) { return -ENODEV; }
+ phys_addr_t size) { return -ENODEV; }
+static inline int qcom_scm_pas_auth_and_reset(u32 peripheral)
+ { return -ENODEV; }
static inline int qcom_scm_pas_shutdown(u32 peripheral) { return -ENODEV; }
+static inline bool qcom_scm_pas_supported(u32 peripheral) { return false; }
+
+static inline int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
+ { return -ENODEV; }
+static inline int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
+ { return -ENODEV; }
+
+static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
+ { return -ENODEV; }
+static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size)
+ { return -ENODEV; }
+static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
+ { return -ENODEV; }
static inline int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
- unsigned int *src,
- const struct qcom_scm_vmperm *newvm,
- unsigned int dest_cnt) { return -ENODEV; }
-static inline void qcom_scm_cpu_power_down(u32 flags) {}
-static inline u32
-qcom_scm_set_remote_state(u32 state,u32 id) { return -ENODEV; }
-static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
-static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
-static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
-static inline int qcom_scm_qsmmu500_wait_safe_toggle(bool en) { return -ENODEV; }
-static inline int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val) { return -ENODEV; }
-static inline int qcom_scm_io_writel(phys_addr_t addr, unsigned int val) { return -ENODEV; }
+ unsigned int *src, const struct qcom_scm_vmperm *newvm,
+ unsigned int dest_cnt) { return -ENODEV; }
+
+static inline bool qcom_scm_hdcp_available(void) { return false; }
+static inline int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
+ u32 *resp) { return -ENODEV; }
+
+static inline int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
+ { return -ENODEV; }
#endif
#endif