| Message ID | 1580456335-7317-1-git-send-email-gubbaven@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/2] Bluetooth: hci_qca: Enable clocks required for BT SOC | expand |
Hi Venkata, > Instead of relying on other subsytem to turn ON clocks > required for BT SoC to operate, voting them from the driver. > > Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> > --- > v2: > * addressed forward declarations > * updated with devm_clk_get_optional() > > --- > drivers/bluetooth/hci_qca.c | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c > index d6e0c99..73706f3 100644 > --- a/drivers/bluetooth/hci_qca.c > +++ b/drivers/bluetooth/hci_qca.c > @@ -1738,6 +1738,15 @@ static int qca_power_off(struct hci_dev *hdev) > return 0; > } > > +static int qca_setup_clock(struct clk *clk, bool enable) > +{ > + if (enable) > + return clk_prepare_enable(clk); > + > + clk_disable_unprepare(clk); > + return 0; > +} > + this function is pointless and it just complicated the code. > static int qca_regulator_enable(struct qca_serdev *qcadev) > { > struct qca_power *power = qcadev->bt_power; > @@ -1755,6 +1764,13 @@ static int qca_regulator_enable(struct qca_serdev *qcadev) > > power->vregs_on = true; > > + ret = qca_setup_clock(qcadev->susclk, true); ret = clk_prepare_enable(qcadev->susclk); > + if (ret) { > + /* Turn off regulators to overcome power leakage */ > + qca_regulator_disable(qcadev); > + return ret; > + } > + > return 0; > } > > @@ -1773,6 +1789,9 @@ static void qca_regulator_disable(struct qca_serdev *qcadev) > > regulator_bulk_disable(power->num_vregs, power->vreg_bulk); > power->vregs_on = false; > + > + if (qcadev->susclk) > + qca_setup_clock(qcadev->susclk, false); clk_disable_unprepare(qcadev->susclk); > } > > static int qca_init_regulators(struct qca_power *qca, > @@ -1839,6 +1858,12 @@ static int qca_serdev_probe(struct serdev_device *serdev) > > qcadev->bt_power->vregs_on = false; > > + qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL); > + if (IS_ERR(qcadev->susclk)) { > + dev_err(&serdev->dev, "failed to acquire clk\n"); > + return PTR_ERR(qcadev->susclk); > + } > + > device_property_read_u32(&serdev->dev, "max-speed", > &qcadev->oper_speed); > if (!qcadev->oper_speed) Regards Marcel
Hi Marcel, On 2020-02-01 01:21, Marcel Holtmann wrote: > Hi Venkata, > >> Instead of relying on other subsytem to turn ON clocks >> required for BT SoC to operate, voting them from the driver. >> >> Signed-off-by: Venkata Lakshmi Narayana Gubba >> <gubbaven@codeaurora.org> >> --- >> v2: >> * addressed forward declarations >> * updated with devm_clk_get_optional() >> >> --- >> drivers/bluetooth/hci_qca.c | 25 +++++++++++++++++++++++++ >> 1 file changed, 25 insertions(+) >> >> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c >> index d6e0c99..73706f3 100644 >> --- a/drivers/bluetooth/hci_qca.c >> +++ b/drivers/bluetooth/hci_qca.c >> @@ -1738,6 +1738,15 @@ static int qca_power_off(struct hci_dev *hdev) >> return 0; >> } >> >> +static int qca_setup_clock(struct clk *clk, bool enable) >> +{ >> + if (enable) >> + return clk_prepare_enable(clk); >> + >> + clk_disable_unprepare(clk); >> + return 0; >> +} >> + > > this function is pointless and it just complicated the code. [Venkata] : Sure we will remove the function and will update in next patch set. > >> static int qca_regulator_enable(struct qca_serdev *qcadev) >> { >> struct qca_power *power = qcadev->bt_power; >> @@ -1755,6 +1764,13 @@ static int qca_regulator_enable(struct >> qca_serdev *qcadev) >> >> power->vregs_on = true; >> >> + ret = qca_setup_clock(qcadev->susclk, true); > > ret = clk_prepare_enable(qcadev->susclk); [Venkata] : Sure.We will update in next patch set. > >> + if (ret) { >> + /* Turn off regulators to overcome power leakage */ >> + qca_regulator_disable(qcadev); >> + return ret; >> + } >> + >> return 0; >> } >> >> @@ -1773,6 +1789,9 @@ static void qca_regulator_disable(struct >> qca_serdev *qcadev) >> >> regulator_bulk_disable(power->num_vregs, power->vreg_bulk); >> power->vregs_on = false; >> + >> + if (qcadev->susclk) >> + qca_setup_clock(qcadev->susclk, false); > > clk_disable_unprepare(qcadev->susclk); [Venkata] : Sure.We will update in next patch set. > >> } >> >> static int qca_init_regulators(struct qca_power *qca, >> @@ -1839,6 +1858,12 @@ static int qca_serdev_probe(struct >> serdev_device *serdev) >> >> qcadev->bt_power->vregs_on = false; >> >> + qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL); >> + if (IS_ERR(qcadev->susclk)) { >> + dev_err(&serdev->dev, "failed to acquire clk\n"); >> + return PTR_ERR(qcadev->susclk); >> + } >> + >> device_property_read_u32(&serdev->dev, "max-speed", >> &qcadev->oper_speed); >> if (!qcadev->oper_speed) > > Regards > > Marcel Regards, Venkata.
On Thu 30 Jan 23:38 PST 2020, Venkata Lakshmi Narayana Gubba wrote: > Instead of relying on other subsytem to turn ON clocks > required for BT SoC to operate, voting them from the driver. > > Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> > --- > v2: > * addressed forward declarations > * updated with devm_clk_get_optional() > > --- > drivers/bluetooth/hci_qca.c | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c > index d6e0c99..73706f3 100644 > --- a/drivers/bluetooth/hci_qca.c > +++ b/drivers/bluetooth/hci_qca.c > @@ -1738,6 +1738,15 @@ static int qca_power_off(struct hci_dev *hdev) > return 0; > } > > +static int qca_setup_clock(struct clk *clk, bool enable) > +{ > + if (enable) > + return clk_prepare_enable(clk); > + > + clk_disable_unprepare(clk); > + return 0; > +} As Marcel requested, inline these. > + > static int qca_regulator_enable(struct qca_serdev *qcadev) > { > struct qca_power *power = qcadev->bt_power; > @@ -1755,6 +1764,13 @@ static int qca_regulator_enable(struct qca_serdev *qcadev) > > power->vregs_on = true; > > + ret = qca_setup_clock(qcadev->susclk, true); > + if (ret) { > + /* Turn off regulators to overcome power leakage */ You can omit this comment as well, as the name of the function you call is aptly named. > + qca_regulator_disable(qcadev); > + return ret; Just return ret below instead. > + } > + > return 0; > } > > @@ -1773,6 +1789,9 @@ static void qca_regulator_disable(struct qca_serdev *qcadev) > > regulator_bulk_disable(power->num_vregs, power->vreg_bulk); > power->vregs_on = false; > + > + if (qcadev->susclk) In the enable path you (correctly) rely on passing NULL to the clock code, so do the same here. Regards, Bjorn
Hi Bjorn, >> Instead of relying on other subsytem to turn ON clocks >> required for BT SoC to operate, voting them from the driver. >> >> Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> >> --- >> v2: >> * addressed forward declarations >> * updated with devm_clk_get_optional() >> >> --- >> drivers/bluetooth/hci_qca.c | 25 +++++++++++++++++++++++++ >> 1 file changed, 25 insertions(+) >> >> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c >> index d6e0c99..73706f3 100644 >> --- a/drivers/bluetooth/hci_qca.c >> +++ b/drivers/bluetooth/hci_qca.c >> @@ -1738,6 +1738,15 @@ static int qca_power_off(struct hci_dev *hdev) >> return 0; >> } >> >> +static int qca_setup_clock(struct clk *clk, bool enable) >> +{ >> + if (enable) >> + return clk_prepare_enable(clk); >> + >> + clk_disable_unprepare(clk); >> + return 0; >> +} > > As Marcel requested, inline these. > >> + >> static int qca_regulator_enable(struct qca_serdev *qcadev) >> { >> struct qca_power *power = qcadev->bt_power; >> @@ -1755,6 +1764,13 @@ static int qca_regulator_enable(struct qca_serdev *qcadev) >> >> power->vregs_on = true; >> >> + ret = qca_setup_clock(qcadev->susclk, true); >> + if (ret) { >> + /* Turn off regulators to overcome power leakage */ > > You can omit this comment as well, as the name of the function you call > is aptly named. > >> + qca_regulator_disable(qcadev); >> + return ret; > > Just return ret below instead. > >> + } >> + >> return 0; >> } >> >> @@ -1773,6 +1789,9 @@ static void qca_regulator_disable(struct qca_serdev *qcadev) >> >> regulator_bulk_disable(power->num_vregs, power->vreg_bulk); >> power->vregs_on = false; >> + >> + if (qcadev->susclk) > > In the enable path you (correctly) rely on passing NULL to the clock > code, so do the same here. I already pushed the patch, but I am happy to accept a cleanup patch. Regards Marcel
Hi Bjorn, On 2020-02-04 14:34, Marcel Holtmann wrote: > Hi Bjorn, > >>> Instead of relying on other subsytem to turn ON clocks >>> required for BT SoC to operate, voting them from the driver. >>> >>> Signed-off-by: Venkata Lakshmi Narayana Gubba >>> <gubbaven@codeaurora.org> >>> --- >>> v2: >>> * addressed forward declarations >>> * updated with devm_clk_get_optional() >>> >>> --- >>> drivers/bluetooth/hci_qca.c | 25 +++++++++++++++++++++++++ >>> 1 file changed, 25 insertions(+) >>> >>> diff --git a/drivers/bluetooth/hci_qca.c >>> b/drivers/bluetooth/hci_qca.c >>> index d6e0c99..73706f3 100644 >>> --- a/drivers/bluetooth/hci_qca.c >>> +++ b/drivers/bluetooth/hci_qca.c >>> @@ -1738,6 +1738,15 @@ static int qca_power_off(struct hci_dev *hdev) >>> return 0; >>> } >>> >>> +static int qca_setup_clock(struct clk *clk, bool enable) >>> +{ >>> + if (enable) >>> + return clk_prepare_enable(clk); >>> + >>> + clk_disable_unprepare(clk); >>> + return 0; >>> +} >> >> As Marcel requested, inline these. >> >>> + >>> static int qca_regulator_enable(struct qca_serdev *qcadev) >>> { >>> struct qca_power *power = qcadev->bt_power; >>> @@ -1755,6 +1764,13 @@ static int qca_regulator_enable(struct >>> qca_serdev *qcadev) >>> >>> power->vregs_on = true; >>> >>> + ret = qca_setup_clock(qcadev->susclk, true); >>> + if (ret) { >>> + /* Turn off regulators to overcome power leakage */ >> >> You can omit this comment as well, as the name of the function you >> call >> is aptly named. [Venkata] : We will update in next patch set. >> >>> + qca_regulator_disable(qcadev); >>> + return ret; >> >> Just return ret below instead. [Venkata] : We will update in next patch set >> >>> + } >>> + >>> return 0; >>> } >>> >>> @@ -1773,6 +1789,9 @@ static void qca_regulator_disable(struct >>> qca_serdev *qcadev) >>> >>> regulator_bulk_disable(power->num_vregs, power->vreg_bulk); >>> power->vregs_on = false; >>> + >>> + if (qcadev->susclk) >> >> In the enable path you (correctly) rely on passing NULL to the clock >> code, so do the same here. [Venkata] : We will update in next patch set. > > I already pushed the patch, but I am happy to accept a cleanup patch. > > Regards > > Marcel Regards, Venkata.
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index d6e0c99..73706f3 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -1738,6 +1738,15 @@ static int qca_power_off(struct hci_dev *hdev) return 0; } +static int qca_setup_clock(struct clk *clk, bool enable) +{ + if (enable) + return clk_prepare_enable(clk); + + clk_disable_unprepare(clk); + return 0; +} + static int qca_regulator_enable(struct qca_serdev *qcadev) { struct qca_power *power = qcadev->bt_power; @@ -1755,6 +1764,13 @@ static int qca_regulator_enable(struct qca_serdev *qcadev) power->vregs_on = true; + ret = qca_setup_clock(qcadev->susclk, true); + if (ret) { + /* Turn off regulators to overcome power leakage */ + qca_regulator_disable(qcadev); + return ret; + } + return 0; } @@ -1773,6 +1789,9 @@ static void qca_regulator_disable(struct qca_serdev *qcadev) regulator_bulk_disable(power->num_vregs, power->vreg_bulk); power->vregs_on = false; + + if (qcadev->susclk) + qca_setup_clock(qcadev->susclk, false); } static int qca_init_regulators(struct qca_power *qca, @@ -1839,6 +1858,12 @@ static int qca_serdev_probe(struct serdev_device *serdev) qcadev->bt_power->vregs_on = false; + qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL); + if (IS_ERR(qcadev->susclk)) { + dev_err(&serdev->dev, "failed to acquire clk\n"); + return PTR_ERR(qcadev->susclk); + } + device_property_read_u32(&serdev->dev, "max-speed", &qcadev->oper_speed); if (!qcadev->oper_speed)
Instead of relying on other subsytem to turn ON clocks required for BT SoC to operate, voting them from the driver. Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> --- v2: * addressed forward declarations * updated with devm_clk_get_optional() --- drivers/bluetooth/hci_qca.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)