| Message ID | 1580472220-3453-2-git-send-email-smasetty@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3] arm64: dts: qcom: sc7180: Add A618 gpu dt blob | expand |
Hi, On Fri, Jan 31, 2020 at 4:04 AM Sharat Masetty <smasetty@codeaurora.org> wrote: > > + adreno_smmu: iommu@5040000 { > + compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2"; > + reg = <0 0x05040000 0 0x10000>; > + #iommu-cells = <1>; > + #global-interrupts = <2>; > + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>; > + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, > + <&gcc GCC_GPU_CFG_AHB_CLK>, > + <&gcc GCC_DDRSS_GPU_AXI_CLK>; > + > + clock-names = "bus", "iface", "mem_iface_clk"; Repeated comment from v2 feedback: Please send a patch to: Documentation/devicetree/bindings/iommu/arm,smmu.yaml ...adding 'qcom,sc7180-smmu-v2'. If you do this it will point out that you've added a new clock: "mem_iface_clk". Is this truly a new clock in sc7180 compared to previous IOMMUs? ...or is it not really needed? > + gmu: gmu@506a000 { > + compatible="qcom,adreno-gmu-618.0", "qcom,adreno-gmu"; > + reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>, > + <0 0x0b490000 0 0x10000>; > + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; > + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "hfi", "gmu"; > + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, > + <&gpucc GPU_CC_CXO_CLK>, > + <&gcc GCC_DDRSS_GPU_AXI_CLK>, > + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; > + clock-names = "gmu", "cxo", "axi", "memnoc"; > + power-domains = <&gpucc CX_GDSC>; > + power-domain-names = "cx"; As per continued comments on v2, please see if this works for you: power-domains = <&gpucc CX_GDSC>, <0>; power-domain-names = "cx", "gx"; ...and work to get something more real for "gx" ASAP. It did seem to boot for me and (unless someone disagrees) it seems better than totally leaving it out / violating the bindings? -Doug
On 2020-02-01 03:13, Doug Anderson wrote: > Hi, > > On Fri, Jan 31, 2020 at 4:04 AM Sharat Masetty > <smasetty@codeaurora.org> wrote: >> >> + adreno_smmu: iommu@5040000 { >> + compatible = "qcom,sc7180-smmu-v2", >> "qcom,smmu-v2"; >> + reg = <0 0x05040000 0 0x10000>; >> + #iommu-cells = <1>; >> + #global-interrupts = <2>; >> + interrupts = <GIC_SPI 229 >> IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 231 >> IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 364 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 365 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 366 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 367 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 368 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 369 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 370 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 371 >> IRQ_TYPE_EDGE_RISING>; >> + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, >> + <&gcc GCC_GPU_CFG_AHB_CLK>, >> + <&gcc GCC_DDRSS_GPU_AXI_CLK>; >> + >> + clock-names = "bus", "iface", "mem_iface_clk"; > > Repeated comment from v2 feedback: > > Please send a patch to: > > Documentation/devicetree/bindings/iommu/arm,smmu.yaml > > ...adding 'qcom,sc7180-smmu-v2'. If you do this it will point out > that you've added a new clock: "mem_iface_clk". Is this truly a new > clock in sc7180 compared to previous IOMMUs? ...or is it not really > needed? I can confirm that this clock is needed for SC7180. I will send out a new patch to update the documentation this week. > > >> + gmu: gmu@506a000 { >> + compatible="qcom,adreno-gmu-618.0", >> "qcom,adreno-gmu"; >> + reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 >> 0 0x10000>, >> + <0 0x0b490000 0 0x10000>; >> + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; >> + interrupts = <GIC_SPI 304 >> IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; >> + interrupt-names = "hfi", "gmu"; >> + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, >> + <&gpucc GPU_CC_CXO_CLK>, >> + <&gcc GCC_DDRSS_GPU_AXI_CLK>, >> + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; >> + clock-names = "gmu", "cxo", "axi", "memnoc"; >> + power-domains = <&gpucc CX_GDSC>; >> + power-domain-names = "cx"; > > As per continued comments on v2, please see if this works for you: > > power-domains = <&gpucc CX_GDSC>, <0>; > power-domain-names = "cx", "gx"; > > ...and work to get something more real for "gx" ASAP. It did seem to > boot for me and (unless someone disagrees) it seems better than > totally leaving it out / violating the bindings? > > > -Doug
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index f3fcc5c..b39461c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1043,6 +1043,108 @@ }; }; + gpu: gpu@5000000 { + compatible = "qcom,adreno-618.0", "qcom,adreno"; + #stream-id-cells = <16>; + reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>, + <0 0x05061000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc"; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&adreno_smmu 0>; + operating-points-v2 = <&gpu_opp_table>; + qcom,gmu = <&gmu>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-565000000 { + opp-hz = /bits/ 64 <565000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-355000000 { + opp-hz = /bits/ 64 <355000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2"; + reg = <0 0x05040000 0 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>; + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>; + + clock-names = "bus", "iface", "mem_iface_clk"; + power-domains = <&gpucc CX_GDSC>; + }; + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu-618.0", "qcom,adreno-gmu"; + reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>, + <0 0x0b490000 0 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + power-domains = <&gpucc CX_GDSC>; + power-domain-names = "cx"; + iommus = <&adreno_smmu 5>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + gpucc: clock-controller@5090000 { compatible = "qcom,sc7180-gpucc"; reg = <0 0x05090000 0 0x9000>;
This patch adds the required dt nodes and properties to enabled A618 GPU. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 +++++++++++++++++++++++++++++++++++ 1 file changed, 102 insertions(+)