@@ -8,6 +8,7 @@
#define __RPM_INTERNAL_H__
#include <linux/bitmap.h>
+#include <linux/pm_domain.h>
#include <soc/qcom/tcs.h>
#define TCS_TYPE_NR 4
@@ -102,6 +103,7 @@ struct rsc_drv {
DECLARE_BITMAP(tcs_in_use, MAX_TCS_NR);
spinlock_t lock;
struct rpmh_ctrlr client;
+ struct generic_pm_domain rsc_pd;
};
int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg);
@@ -499,6 +499,32 @@ static int tcs_ctrl_write(struct rsc_drv *drv, const struct tcs_request *msg)
}
/**
+ * rpmh_rsc_ctrlr_is_idle: Check if any of the AMCs are busy.
+ *
+ * @drv: The controller
+ *
+ * Return: false if the TCSes are engaged in handling requests, True otherwise.
+ */
+static bool rpmh_rsc_ctrlr_is_idle(struct rsc_drv *drv)
+{
+ int m;
+ struct tcs_group *tcs = get_tcs_of_type(drv, ACTIVE_TCS);
+ bool ret = true;
+ unsigned long flags;
+
+ spin_lock_irqsave(&drv->lock, flags);
+ for (m = tcs->offset; m < tcs->offset + tcs->num_tcs; m++) {
+ if (!tcs_is_free(drv, m)) {
+ ret = false;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&drv->lock, flags);
+
+ return ret;
+}
+
+/**
* rpmh_rsc_write_ctrl_data: Write request to the controller
*
* @drv: the controller
@@ -521,6 +547,50 @@ int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv, const struct tcs_request *msg)
return tcs_ctrl_write(drv, msg);
}
+static int rpmh_domain_power_off(struct generic_pm_domain *rsc_pd)
+{
+ struct rsc_drv *drv = container_of(rsc_pd, struct rsc_drv, rsc_pd);
+
+ /*
+ * RPMh domain can not be powered off when there is pending ACK for
+ * ACTIVE_TCS request. Exit when controller is busy.
+ */
+ if (!rpmh_rsc_ctrlr_is_idle(drv))
+ return -EBUSY;
+
+ return rpmh_flush(&drv->client);
+}
+
+static int rpmh_probe_power_domain(struct platform_device *pdev,
+ struct rsc_drv *drv)
+{
+ int ret;
+ struct generic_pm_domain *rsc_pd = &drv->rsc_pd;
+ struct device_node *dn = pdev->dev.of_node;
+
+ rsc_pd->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s", dn->name);
+ if (!rsc_pd->name)
+ return -ENOMEM;
+
+ rsc_pd->name = kbasename(rsc_pd->name);
+ rsc_pd->power_off = rpmh_domain_power_off;
+ rsc_pd->flags |= GENPD_FLAG_IRQ_SAFE;
+
+ ret = pm_genpd_init(rsc_pd, NULL, false);
+ if (ret)
+ return ret;
+
+ ret = of_genpd_add_provider_simple(dn, rsc_pd);
+ if (ret)
+ goto remove_pd;
+
+ return ret;
+
+remove_pd:
+ pm_genpd_remove(rsc_pd);
+ return ret;
+}
+
static int rpmh_probe_tcs_config(struct platform_device *pdev,
struct rsc_drv *drv)
{
@@ -663,6 +733,17 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
if (ret)
return ret;
+ /*
+ * Power domain is not required for controllers that support 'solver'
+ * mode where they can be in autonomous mode executing low power mode
+ * to power down.
+ */
+ if (of_property_read_bool(dn, "#power-domain-cells")) {
+ ret = rpmh_probe_power_domain(pdev, drv);
+ if (ret)
+ return ret;
+ }
+
/* Enable the active TCS to send requests immediately */
write_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, drv->tcs[ACTIVE_TCS].mask);
Add RSC power domain support. RSC is top level power domain in hireachical CPU LPM modes. Once the rsc domain is down flush all cached sleep and wake votes from controller. Signed-off-by: Maulik Shah <mkshah@codeaurora.org> --- drivers/soc/qcom/rpmh-internal.h | 2 + drivers/soc/qcom/rpmh-rsc.c | 81 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 83 insertions(+)