From patchwork Mon Mar 23 17:46:56 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kiran Gunda X-Patchwork-Id: 11453633 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id CED35159A for ; Mon, 23 Mar 2020 17:47:58 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id A61F920722 for ; Mon, 23 Mar 2020 17:47:58 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mg.codeaurora.org header.i=@mg.codeaurora.org header.b="g7Gt954p" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727361AbgCWRr6 (ORCPT ); Mon, 23 Mar 2020 13:47:58 -0400 Received: from mail27.static.mailgun.info ([104.130.122.27]:30324 "EHLO mail27.static.mailgun.info" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727479AbgCWRr5 (ORCPT ); Mon, 23 Mar 2020 13:47:57 -0400 DKIM-Signature: a=rsa-sha256; v=1; c=relaxed/relaxed; d=mg.codeaurora.org; q=dns/txt; s=smtp; t=1584985677; h=References: In-Reply-To: Message-Id: Date: Subject: Cc: To: From: Sender; bh=6ndHcumN/pHo5IifapOE1orenghbdL17ENJNDa1llco=; b=g7Gt954pNTWY3+evdGX1iMfQ2q+1wBY9VnzIT0QQRD8ji0WUwQWQDa8fzAWJwgU3s4RZAfAS v8pJ/2ALcrPC+TfYhysOLciz5gyRwvuXN8WL9sK31IS8cuxLZTRQeYItE+aaAB+eEnlkSx4o maRoXE02seeGzM5hdRGgZaunUlM= X-Mailgun-Sending-Ip: 104.130.122.27 X-Mailgun-Sid: WyI1MzIzYiIsICJsaW51eC1hcm0tbXNtQHZnZXIua2VybmVsLm9yZyIsICJiZTllNGEiXQ== Received: from smtp.codeaurora.org (ec2-35-166-182-171.us-west-2.compute.amazonaws.com [35.166.182.171]) by mxa.mailgun.org with ESMTP id 5e78f645.7facd4af95e0-smtp-out-n02; Mon, 23 Mar 2020 17:47:49 -0000 (UTC) Received: by smtp.codeaurora.org (Postfix, from userid 1001) id 77C76C433D2; Mon, 23 Mar 2020 17:47:49 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-caf-mail-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.0 required=2.0 tests=ALL_TRUSTED,SPF_NONE, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from kgunda-linux.qualcomm.com (blr-c-bdr-fw-01_GlobalNAT_AllZones-Outside.qualcomm.com [103.229.19.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: kgunda) by smtp.codeaurora.org (Postfix) with ESMTPSA id 65FD1C43637; Mon, 23 Mar 2020 17:47:42 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 65FD1C43637 Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; spf=none smtp.mailfrom=kgunda@codeaurora.org From: Kiran Gunda To: bjorn.andersson@linaro.org, jingoohan1@gmail.com, lee.jones@linaro.org, b.zolnierkie@samsung.com, dri-devel@lists.freedesktop.org, daniel.thompson@linaro.org, jacek.anaszewski@gmail.com, pavel@ucw.cz, robh+dt@kernel.org, mark.rutland@arm.com, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Andy Gross , linux-arm-msm@vger.kernel.org, linux-fbdev@vger.kernel.org Cc: Kiran Gunda Subject: [PATCH V4 2/4] backlight: qcom-wled: Add callback functions Date: Mon, 23 Mar 2020 23:16:56 +0530 Message-Id: <1584985618-25689-3-git-send-email-kgunda@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1584985618-25689-1-git-send-email-kgunda@codeaurora.org> References: <1584985618-25689-1-git-send-email-kgunda@codeaurora.org> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add wled_cabc_config, wled_sync_toggle, wled_ovp_fault_status and wled_ovp_delay callback functions to prepare the driver for adding WLED5 support. wled_cabc_config() ===> Used to configure the cabc register. It is applicable for wled4 and wled5. wled_sync_toggle() ===> used to toggle the Sync register bit for the brightness update to take place. It is applicable for WLED3, WLED4 and WLED5. wled_ovp_fault_status() ===> Used to determine if the OVP fault is triggered. It is applicable for WLED4 and WLED5. wled_ovp_delay() ===> Provides the time to wait before checking the OVP status after wled module enable. It is applicable for WLED4 and WLED5. Signed-off-by: Kiran Gunda --- drivers/video/backlight/qcom-wled.c | 188 ++++++++++++++++++++++-------------- 1 file changed, 118 insertions(+), 70 deletions(-) diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index 3d276b3..a3daf9e 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -147,6 +147,7 @@ struct wled { u32 max_brightness; u32 short_count; u32 auto_detect_count; + u32 version; bool disabled_by_short; bool has_short_detect; int short_irq; @@ -155,6 +156,10 @@ struct wled { struct wled_config cfg; struct delayed_work ovp_work; int (*wled_set_brightness)(struct wled *wled, u16 brightness); + int (*wled_cabc_config)(struct wled *wled, bool enable); + int (*wled_sync_toggle)(struct wled *wled); + int (*wled_ovp_fault_status)(struct wled *wled, bool *fault_set); + int (*wled_ovp_delay)(struct wled *wled); }; static int wled3_set_brightness(struct wled *wled, u16 brightness) @@ -237,7 +242,7 @@ static int wled_module_enable(struct wled *wled, int val) return 0; } -static int wled_sync_toggle(struct wled *wled) +static int wled3_sync_toggle(struct wled *wled) { int rc; unsigned int mask = GENMASK(wled->max_string_count - 1, 0); @@ -255,6 +260,46 @@ static int wled_sync_toggle(struct wled *wled) return rc; } +static int wled4_ovp_fault_status(struct wled *wled, bool *fault_set) +{ + int rc; + u32 int_rt_sts, fault_sts; + + *fault_set = false; + rc = regmap_read(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS, + &int_rt_sts); + if (rc < 0) { + dev_err(wled->dev, "Failed to read INT_RT_STS rc=%d\n", rc); + return rc; + } + + rc = regmap_read(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FAULT_STATUS, + &fault_sts); + if (rc < 0) { + dev_err(wled->dev, "Failed to read FAULT_STATUS rc=%d\n", rc); + return rc; + } + + if (int_rt_sts & WLED3_CTRL_REG_OVP_FAULT_STATUS) + *fault_set = true; + + if (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT) + *fault_set = true; + + if (*fault_set) + dev_dbg(wled->dev, "WLED OVP fault detected, int_rt_sts=0x%x fault_sts=0x%x\n", + int_rt_sts, fault_sts); + + return rc; +} + +static int wled4_ovp_delay(struct wled *wled) +{ + return WLED_SOFT_START_DLY_US; +} + static int wled_update_status(struct backlight_device *bl) { struct wled *wled = bl_get_data(bl); @@ -275,7 +320,7 @@ static int wled_update_status(struct backlight_device *bl) goto unlock_mutex; } - rc = wled_sync_toggle(wled); + rc = wled->wled_sync_toggle(wled); if (rc < 0) { dev_err(wled->dev, "wled sync failed rc:%d\n", rc); goto unlock_mutex; @@ -298,6 +343,25 @@ static int wled_update_status(struct backlight_device *bl) return rc; } +static int wled4_cabc_config(struct wled *wled, bool enable) +{ + int i, j, rc; + u8 val; + + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + + val = enable ? WLED4_SINK_REG_STR_CABC_MASK : 0; + rc = regmap_update_bits(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_STR_CABC(j), + WLED4_SINK_REG_STR_CABC_MASK, val); + if (rc < 0) + return rc; + } + + return 0; +} + #define WLED_SHORT_DLY_MS 20 #define WLED_SHORT_CNT_MAX 5 #define WLED_SHORT_RESET_CNT_DLY_US USEC_PER_SEC @@ -345,9 +409,10 @@ static irqreturn_t wled_short_irq_handler(int irq, void *_wled) static void wled_auto_string_detection(struct wled *wled) { - int rc = 0, i; - u32 sink_config = 0, int_sts; + int rc = 0, i, delay_time_us; + u32 sink_config = 0; u8 sink_test = 0, sink_valid = 0, val; + bool fault_set; /* Read configured sink configuration */ rc = regmap_read(wled->regmap, wled->sink_addr + @@ -376,14 +441,9 @@ static void wled_auto_string_detection(struct wled *wled) } if (wled->cfg.cabc) { - for (i = 0; i < wled->cfg.num_strings; i++) { - rc = regmap_update_bits(wled->regmap, wled->sink_addr + - WLED4_SINK_REG_STR_CABC(i), - WLED4_SINK_REG_STR_CABC_MASK, - 0); - if (rc < 0) - goto failed_detect; - } + rc = wled->wled_cabc_config(wled, 0); + if (rc < 0) + goto failed_detect; } /* Disable all sinks */ @@ -427,18 +487,17 @@ static void wled_auto_string_detection(struct wled *wled) goto failed_detect; } - usleep_range(WLED_SOFT_START_DLY_US, - WLED_SOFT_START_DLY_US + 1000); + delay_time_us = wled->wled_ovp_delay(wled); + usleep_range(delay_time_us, delay_time_us + 1000); - rc = regmap_read(wled->regmap, wled->ctrl_addr + - WLED3_CTRL_REG_INT_RT_STS, &int_sts); + rc = wled->wled_ovp_fault_status(wled, &fault_set); if (rc < 0) { - dev_err(wled->dev, "Error in reading WLED3_CTRL_INT_RT_STS rc=%d\n", + dev_err(wled->dev, "Error in getting OVP fault_sts, rc=%d\n", rc); goto failed_detect; } - if (int_sts & WLED3_CTRL_REG_OVP_FAULT_STATUS) + if (fault_set) dev_dbg(wled->dev, "WLED OVP fault detected with SINK %d\n", i + 1); else @@ -478,30 +537,30 @@ static void wled_auto_string_detection(struct wled *wled) } /* Enable valid sinks */ - for (i = 0; i < wled->cfg.num_strings; i++) { - if (wled->cfg.cabc) { - rc = regmap_update_bits(wled->regmap, wled->sink_addr + - WLED4_SINK_REG_STR_CABC(i), - WLED4_SINK_REG_STR_CABC_MASK, - WLED4_SINK_REG_STR_CABC_MASK); - if (rc < 0) + if (wled->version == 4) { + for (i = 0; i < wled->cfg.num_strings; i++) { + if (sink_config & + BIT(WLED4_SINK_REG_CURR_SINK_SHFT + i)) + val = WLED4_SINK_REG_STR_MOD_MASK; + else + /* Disable modulator_en for unused sink */ + val = 0x0; + + rc = regmap_write(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_STR_MOD_EN(i), val); + if (rc < 0) { + dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n", + rc); goto failed_detect; - } - - if (sink_config & BIT(WLED4_SINK_REG_CURR_SINK_SHFT + i)) - val = WLED4_SINK_REG_STR_MOD_MASK; - else - val = 0x0; /* Disable modulator_en for unused sink */ - - rc = regmap_write(wled->regmap, wled->sink_addr + - WLED4_SINK_REG_STR_MOD_EN(i), val); - if (rc < 0) { - dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n", - rc); - goto failed_detect; + } } } + /* Enable CABC if it needs to be enabled */ + rc = wled->wled_cabc_config(wled, true); + if (rc < 0) + goto failed_detect; + /* Restore the feedback setting */ rc = regmap_write(wled->regmap, wled->ctrl_addr + WLED3_CTRL_REG_FEEDBACK_CONTROL, 0); @@ -570,29 +629,19 @@ static bool wled_auto_detection_required(struct wled *wled) static int wled_auto_detection_at_init(struct wled *wled) { int rc; - u32 fault_status, rt_status; + bool fault_set; if (!wled->cfg.auto_detection_enabled) return 0; - rc = regmap_read(wled->regmap, - wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS, - &rt_status); + rc = wled->wled_ovp_fault_status(wled, &fault_set); if (rc < 0) { - dev_err(wled->dev, "Failed to read RT status rc=%d\n", rc); - return rc; - } - - rc = regmap_read(wled->regmap, - wled->ctrl_addr + WLED3_CTRL_REG_FAULT_STATUS, - &fault_status); - if (rc < 0) { - dev_err(wled->dev, "Failed to read fault status rc=%d\n", rc); + dev_err(wled->dev, "Error in getting OVP fault_sts, rc=%d\n", + rc); return rc; } - if ((rt_status & WLED3_CTRL_REG_OVP_FAULT_STATUS) || - (fault_status & WLED3_CTRL_REG_OVP_FAULT_BIT)) { + if (fault_set) { mutex_lock(&wled->lock); wled_auto_string_detection(wled); mutex_unlock(&wled->lock); @@ -811,17 +860,12 @@ static int wled4_setup(struct wled *wled) wled->cfg.string_i_limit); if (rc < 0) return rc; - - addr = wled->sink_addr + - WLED4_SINK_REG_STR_CABC(j); - rc = regmap_update_bits(wled->regmap, addr, - WLED4_SINK_REG_STR_CABC_MASK, - wled->cfg.cabc ? - WLED4_SINK_REG_STR_CABC_MASK : 0); - if (rc < 0) - return rc; } + rc = wled4_cabc_config(wled, wled->cfg.en_cabc); + if (rc < 0) + return rc; + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN, WLED3_CTRL_REG_MOD_EN_MASK, @@ -835,7 +879,7 @@ static int wled4_setup(struct wled *wled) if (rc < 0) return rc; - rc = wled_sync_toggle(wled); + rc = wled->wled_sync_toggle(wled); if (rc < 0) { dev_err(wled->dev, "Failed to toggle sync reg rc:%d\n", rc); return rc; @@ -951,7 +995,7 @@ static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) return idx; } -static int wled_configure(struct wled *wled, int version) +static int wled_configure(struct wled *wled) { struct wled_config *cfg = &wled->cfg; struct device *dev = wled->dev; @@ -1035,12 +1079,13 @@ static int wled_configure(struct wled *wled, int version) if (rc) wled->name = devm_kasprintf(dev, GFP_KERNEL, "%pOFn", dev->of_node); - switch (version) { + switch (wled->version) { case 3: u32_opts = wled3_opts; size = ARRAY_SIZE(wled3_opts); *cfg = wled3_config_defaults; wled->wled_set_brightness = wled3_set_brightness; + wled->wled_sync_toggle = wled3_sync_toggle; wled->max_string_count = 3; wled->sink_addr = wled->ctrl_addr; break; @@ -1050,6 +1095,10 @@ static int wled_configure(struct wled *wled, int version) size = ARRAY_SIZE(wled4_opts); *cfg = wled4_config_defaults; wled->wled_set_brightness = wled4_set_brightness; + wled->wled_sync_toggle = wled3_sync_toggle; + wled->wled_cabc_config = wled4_cabc_config; + wled->wled_ovp_fault_status = wled4_ovp_fault_status; + wled->wled_ovp_delay = wled4_ovp_delay; wled->max_string_count = 4; prop_addr = of_get_address(dev->of_node, 1, NULL, NULL); @@ -1186,7 +1235,6 @@ static int wled_probe(struct platform_device *pdev) struct backlight_device *bl; struct wled *wled; struct regmap *regmap; - int version; u32 val; int rc; @@ -1203,18 +1251,18 @@ static int wled_probe(struct platform_device *pdev) wled->regmap = regmap; wled->dev = &pdev->dev; - version = (uintptr_t)of_device_get_match_data(&pdev->dev); - if (!version) { + wled->version = (uintptr_t)of_device_get_match_data(&pdev->dev); + if (!wled->version) { dev_err(&pdev->dev, "Unknown device version\n"); return -ENODEV; } mutex_init(&wled->lock); - rc = wled_configure(wled, version); + rc = wled_configure(wled); if (rc) return rc; - switch (version) { + switch (wled->version) { case 3: wled->cfg.auto_detection_enabled = false; rc = wled3_setup(wled);