| Message ID | 1588080785-6812-5-git-send-email-rnayak@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | DVFS for IO devices on sdm845 and sc7180 | expand |
Hi Rajendra, On Tue, Apr 28, 2020 at 07:02:52PM +0530, Rajendra Nayak wrote: > qup has a requirement to vote on the performance state of the CX domain > in sc7180 devices. Add OPP tables for these and also add power-domains > property for all qup instances. > > Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sc7180.dtsi | 79 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 79 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi > index 998f101..efba600 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi > @@ -417,6 +417,25 @@ > status = "disabled"; > }; > > + qup_opp_table: qup-opp-table { > + compatible = "operating-points-v2"; > + > + opp-75000000 { > + opp-hz = /bits/ 64 <75000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-100000000 { > + opp-hz = /bits/ 64 <100000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-128000000 { > + opp-hz = /bits/ 64 <128000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > + > qupv3_id_0: geniqup@8c0000 { > compatible = "qcom,geni-se-qup"; > reg = <0 0x008c0000 0 0x6000>; no entries for i2c0? > @@ -452,6 +471,8 @@ > interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -463,6 +484,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart0_default>; > interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -476,6 +499,8 @@ > interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -489,6 +514,8 @@ > interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -500,6 +527,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart1_default>; > interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -513,6 +542,8 @@ > interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -524,6 +555,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart2_default>; > interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -537,6 +570,8 @@ > interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -550,6 +585,8 @@ > interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -561,6 +598,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart3_default>; > interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -574,6 +613,8 @@ > interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -585,6 +626,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart4_default>; > interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -598,6 +641,8 @@ > interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -611,6 +656,8 @@ > interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -622,6 +669,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart5_default>; > interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > }; no entries for i2c6? > @@ -661,6 +710,8 @@ > interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -672,6 +723,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart6_default>; > interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -685,6 +738,8 @@ > interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -696,6 +751,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart7_default>; > interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -709,6 +766,8 @@ > interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -722,6 +781,8 @@ > interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -733,6 +794,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart8_default>; > interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -746,6 +809,8 @@ > interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -757,6 +822,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart9_default>; > interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -770,6 +837,8 @@ > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -783,6 +852,8 @@ > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -794,6 +865,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart10_default>; > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -807,6 +880,8 @@ > interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -820,6 +895,8 @@ > interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > > @@ -831,6 +908,8 @@ > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart11_default>; > interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; > + power-domains = <&rpmhpd SC7180_CX>; > + operating-points-v2 = <&qup_opp_table>; > status = "disabled"; > }; > }
On 6/25/2020 8:47 PM, Matthias Kaehlcke wrote: > Hi Rajendra, > > On Tue, Apr 28, 2020 at 07:02:52PM +0530, Rajendra Nayak wrote: >> qup has a requirement to vote on the performance state of the CX domain >> in sc7180 devices. Add OPP tables for these and also add power-domains >> property for all qup instances. >> >> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> >> --- >> arch/arm64/boot/dts/qcom/sc7180.dtsi | 79 ++++++++++++++++++++++++++++++++++++ >> 1 file changed, 79 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi >> index 998f101..efba600 100644 >> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi >> @@ -417,6 +417,25 @@ >> status = "disabled"; >> }; >> >> + qup_opp_table: qup-opp-table { >> + compatible = "operating-points-v2"; >> + >> + opp-75000000 { >> + opp-hz = /bits/ 64 <75000000>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + }; >> + >> + opp-100000000 { >> + opp-hz = /bits/ 64 <100000000>; >> + required-opps = <&rpmhpd_opp_svs>; >> + }; >> + >> + opp-128000000 { >> + opp-hz = /bits/ 64 <128000000>; >> + required-opps = <&rpmhpd_opp_nom>; >> + }; >> + }; >> + >> qupv3_id_0: geniqup@8c0000 { >> compatible = "qcom,geni-se-qup"; >> reg = <0 0x008c0000 0 0x6000>; > > > no entries for i2c0? I have actually wrongly added them for some i2c instances, I need to drop all of them. geni i2c does not support dvfs, it just uses a fixed clock.
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 998f101..efba600 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -417,6 +417,25 @@ status = "disabled"; }; + qup_opp_table: qup-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x008c0000 0 0x6000>; @@ -452,6 +471,8 @@ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -463,6 +484,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart0_default>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -476,6 +499,8 @@ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -489,6 +514,8 @@ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -500,6 +527,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart1_default>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -513,6 +542,8 @@ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -524,6 +555,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart2_default>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -537,6 +570,8 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -550,6 +585,8 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -561,6 +598,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart3_default>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -574,6 +613,8 @@ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -585,6 +626,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart4_default>; interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -598,6 +641,8 @@ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -611,6 +656,8 @@ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -622,6 +669,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart5_default>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; }; @@ -661,6 +710,8 @@ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -672,6 +723,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart6_default>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -685,6 +738,8 @@ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -696,6 +751,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart7_default>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -709,6 +766,8 @@ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -722,6 +781,8 @@ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -733,6 +794,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart8_default>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -746,6 +809,8 @@ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -757,6 +822,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart9_default>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -770,6 +837,8 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -783,6 +852,8 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -794,6 +865,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart10_default>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -807,6 +880,8 @@ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -820,6 +895,8 @@ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -831,6 +908,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart11_default>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; };
qup has a requirement to vote on the performance state of the CX domain in sc7180 devices. Add OPP tables for these and also add power-domains property for all qup instances. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 79 ++++++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+)