@@ -4,6 +4,8 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
+dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
+dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb
new file mode 100644
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+/dts-v1/;
+
+#include "ipq8074-hk10.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C1";
+ compatible = "qcom,ipq8074-hk10-c1", "qcom,ipq8074";
+};
new file mode 100644
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074-hk10.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2";
+ compatible = "qcom,ipq8074-hk10-c2", "qcom,ipq8074";
+};
+
+&q6v5_wcss {
+ status = "disabled";
+};
new file mode 100644
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+
+/ {
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+
+ interrupt-parent = <&intc>;
+
+ aliases {
+ serial0 = &blsp1_uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x0 0x20000000>;
+ };
+};
+
+&blsp1_spi1 {
+ status = "ok";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&blsp1_uart5 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+ perst-gpio = <&tlmm 58 0x1>;
+};
+
+&pcie1 {
+ status = "ok";
+ perst-gpio = <&tlmm 61 0x1>;
+};
+
+&qmp_pcie_phy0 {
+ status = "ok";
+};
+
+&qmp_pcie_phy1 {
+ status = "ok";
+};
+
+&qpic_bam {
+ status = "ok";
+};
+
+&qpic_nand {
+ status = "ok";
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ };
+};
Add initial support for IPQ8074 SoC based HK10-C1 and HK10-C2 evaluation boards. Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> --- arch/arm64/boot/dts/qcom/Makefile | 2 + arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts | 11 ++++ arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts | 14 +++++ arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 76 ++++++++++++++++++++++++++++ 4 files changed, 103 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi