Message ID | 1604473422-29639-2-git-send-email-sibis@codeaurora.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [1/2] remoteproc: qcom_q6v5_mss: Replace ioremap with memremap | expand |
On Wed 04 Nov 01:03 CST 2020, Sibi Sankar wrote: > The application processor accessing the MBA region after assigning it to > the remote Q6 would lead to an XPU violation. Fix this by un-mapping the > MBA region post firmware copy and MBA text log dumps. > > Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> I renamed "ptr" to "mba_region" throughout the patch and applied the pair. Thanks, Bjorn > --- > drivers/remoteproc/qcom_q6v5_mss.c | 37 ++++++++++++++++++++++--------------- > 1 file changed, 22 insertions(+), 15 deletions(-) > > diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c > index 2c866b6da23c..1b4a34325788 100644 > --- a/drivers/remoteproc/qcom_q6v5_mss.c > +++ b/drivers/remoteproc/qcom_q6v5_mss.c > @@ -189,7 +189,6 @@ struct q6v5 { > size_t total_dump_size; > > phys_addr_t mba_phys; > - void *mba_region; > size_t mba_size; > size_t dp_size; > > @@ -408,7 +407,7 @@ static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm, > current_perm, next, perms); > } > > -static void q6v5_debug_policy_load(struct q6v5 *qproc) > +static void q6v5_debug_policy_load(struct q6v5 *qproc, void *ptr) > { > const struct firmware *dp_fw; > > @@ -416,7 +415,7 @@ static void q6v5_debug_policy_load(struct q6v5 *qproc) > return; > > if (SZ_1M + dp_fw->size <= qproc->mba_size) { > - memcpy(qproc->mba_region + SZ_1M, dp_fw->data, dp_fw->size); > + memcpy(ptr + SZ_1M, dp_fw->data, dp_fw->size); > qproc->dp_size = dp_fw->size; > } > > @@ -426,6 +425,7 @@ static void q6v5_debug_policy_load(struct q6v5 *qproc) > static int q6v5_load(struct rproc *rproc, const struct firmware *fw) > { > struct q6v5 *qproc = rproc->priv; > + void *ptr; > > /* MBA is restricted to a maximum size of 1M */ > if (fw->size > qproc->mba_size || fw->size > SZ_1M) { > @@ -433,8 +433,16 @@ static int q6v5_load(struct rproc *rproc, const struct firmware *fw) > return -EINVAL; > } > > - memcpy(qproc->mba_region, fw->data, fw->size); > - q6v5_debug_policy_load(qproc); > + ptr = memremap(qproc->mba_phys, qproc->mba_size, MEMREMAP_WC); > + if (!ptr) { > + dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n", > + &qproc->mba_phys, qproc->mba_size); > + return -EBUSY; > + } > + > + memcpy(ptr, fw->data, fw->size); > + q6v5_debug_policy_load(qproc, ptr); > + memunmap(ptr); > > return 0; > } > @@ -541,6 +549,7 @@ static void q6v5_dump_mba_logs(struct q6v5 *qproc) > { > struct rproc *rproc = qproc->rproc; > void *data; > + void *ptr; > > if (!qproc->has_mba_logs) > return; > @@ -549,12 +558,16 @@ static void q6v5_dump_mba_logs(struct q6v5 *qproc) > qproc->mba_size)) > return; > > - data = vmalloc(MBA_LOG_SIZE); > - if (!data) > + ptr = memremap(qproc->mba_phys, qproc->mba_size, MEMREMAP_WC); > + if (!ptr) > return; > > - memcpy(data, qproc->mba_region, MBA_LOG_SIZE); > - dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL); > + data = vmalloc(MBA_LOG_SIZE); > + if (data) { > + memcpy(data, ptr, MBA_LOG_SIZE); > + dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL); > + } > + memunmap(ptr); > } > > static int q6v5proc_reset(struct q6v5 *qproc) > @@ -1605,12 +1618,6 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc) > > qproc->mba_phys = r.start; > qproc->mba_size = resource_size(&r); > - qproc->mba_region = devm_ioremap_wc(qproc->dev, qproc->mba_phys, qproc->mba_size); > - if (!qproc->mba_region) { > - dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n", > - &r.start, qproc->mba_size); > - return -EBUSY; > - } > > if (!child) { > node = of_parse_phandle(qproc->dev->of_node, > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c index 2c866b6da23c..1b4a34325788 100644 --- a/drivers/remoteproc/qcom_q6v5_mss.c +++ b/drivers/remoteproc/qcom_q6v5_mss.c @@ -189,7 +189,6 @@ struct q6v5 { size_t total_dump_size; phys_addr_t mba_phys; - void *mba_region; size_t mba_size; size_t dp_size; @@ -408,7 +407,7 @@ static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm, current_perm, next, perms); } -static void q6v5_debug_policy_load(struct q6v5 *qproc) +static void q6v5_debug_policy_load(struct q6v5 *qproc, void *ptr) { const struct firmware *dp_fw; @@ -416,7 +415,7 @@ static void q6v5_debug_policy_load(struct q6v5 *qproc) return; if (SZ_1M + dp_fw->size <= qproc->mba_size) { - memcpy(qproc->mba_region + SZ_1M, dp_fw->data, dp_fw->size); + memcpy(ptr + SZ_1M, dp_fw->data, dp_fw->size); qproc->dp_size = dp_fw->size; } @@ -426,6 +425,7 @@ static void q6v5_debug_policy_load(struct q6v5 *qproc) static int q6v5_load(struct rproc *rproc, const struct firmware *fw) { struct q6v5 *qproc = rproc->priv; + void *ptr; /* MBA is restricted to a maximum size of 1M */ if (fw->size > qproc->mba_size || fw->size > SZ_1M) { @@ -433,8 +433,16 @@ static int q6v5_load(struct rproc *rproc, const struct firmware *fw) return -EINVAL; } - memcpy(qproc->mba_region, fw->data, fw->size); - q6v5_debug_policy_load(qproc); + ptr = memremap(qproc->mba_phys, qproc->mba_size, MEMREMAP_WC); + if (!ptr) { + dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n", + &qproc->mba_phys, qproc->mba_size); + return -EBUSY; + } + + memcpy(ptr, fw->data, fw->size); + q6v5_debug_policy_load(qproc, ptr); + memunmap(ptr); return 0; } @@ -541,6 +549,7 @@ static void q6v5_dump_mba_logs(struct q6v5 *qproc) { struct rproc *rproc = qproc->rproc; void *data; + void *ptr; if (!qproc->has_mba_logs) return; @@ -549,12 +558,16 @@ static void q6v5_dump_mba_logs(struct q6v5 *qproc) qproc->mba_size)) return; - data = vmalloc(MBA_LOG_SIZE); - if (!data) + ptr = memremap(qproc->mba_phys, qproc->mba_size, MEMREMAP_WC); + if (!ptr) return; - memcpy(data, qproc->mba_region, MBA_LOG_SIZE); - dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL); + data = vmalloc(MBA_LOG_SIZE); + if (data) { + memcpy(data, ptr, MBA_LOG_SIZE); + dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL); + } + memunmap(ptr); } static int q6v5proc_reset(struct q6v5 *qproc) @@ -1605,12 +1618,6 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc) qproc->mba_phys = r.start; qproc->mba_size = resource_size(&r); - qproc->mba_region = devm_ioremap_wc(qproc->dev, qproc->mba_phys, qproc->mba_size); - if (!qproc->mba_region) { - dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n", - &r.start, qproc->mba_size); - return -EBUSY; - } if (!child) { node = of_parse_phandle(qproc->dev->of_node,
The application processor accessing the MBA region after assigning it to the remote Q6 would lead to an XPU violation. Fix this by un-mapping the MBA region post firmware copy and MBA text log dumps. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> --- drivers/remoteproc/qcom_q6v5_mss.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-)