[v4,01/12] bus: mhi: core: Use appropriate names for firmware load functions

Commit Message

Bhaumik Bhatt Nov. 9, 2020, 8:47 p.m. UTC

mhi_fw_load_sbl() function is currently used to transfer SBL or EDL
images over BHI (Boot Host Interface). Same goes with mhi_fw_load_amss()
which uses BHIe. However, the contents of these functions do not
indicate support for a specific set of images. Since these can be used
for any image download over BHI or BHIe, rename them based on the
protocol used.

Signed-off-by: Bhaumik Bhatt <[e-mail]>
Reviewed-by: Manivannan Sadhasivam <[e-mail]>
---
 drivers/bus/mhi/core/boot.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

Patch

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index 6f0cfb9..2d7752c 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -176,7 +176,7 @@  int mhi_download_rddm_image(struct mhi_controller *mhi_cntrl, bool in_panic)
 }
 EXPORT_SYMBOL_GPL(mhi_download_rddm_image);
 
-static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
+static int mhi_fw_load_bhie(struct mhi_controller *mhi_cntrl,
 			    const struct mhi_buf *mhi_buf)
 {
 	void __iomem *base = mhi_cntrl->bhie;
@@ -192,7 +192,7 @@  static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
 	}
 
 	sequence_id = MHI_RANDOM_U32_NONZERO(BHIE_TXVECSTATUS_SEQNUM_BMSK);
-	dev_dbg(dev, "Starting AMSS download via BHIe. Sequence ID:%u\n",
+	dev_dbg(dev, "Starting image download via BHIe. Sequence ID: %u\n",
 		sequence_id);
 	mhi_write_reg(mhi_cntrl, base, BHIE_TXVECADDR_HIGH_OFFS,
 		      upper_32_bits(mhi_buf->dma_addr));
@@ -223,7 +223,7 @@  static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
 	return (!ret) ? -ETIMEDOUT : 0;
 }
 
-static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl,
+static int mhi_fw_load_bhi(struct mhi_controller *mhi_cntrl,
 			   dma_addr_t dma_addr,
 			   size_t size)
 {
@@ -250,7 +250,7 @@  static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl,
 	}
 
 	session_id = MHI_RANDOM_U32_NONZERO(BHI_TXDB_SEQNUM_BMSK);
-	dev_dbg(dev, "Starting SBL download via BHI. Session ID:%u\n",
+	dev_dbg(dev, "Starting image download via BHI. Session ID: %u\n",
 		session_id);
 	mhi_write_reg(mhi_cntrl, base, BHI_STATUS, 0);
 	mhi_write_reg(mhi_cntrl, base, BHI_IMGADDR_HIGH,
@@ -449,9 +449,9 @@  void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 		return;
 	}
 
-	/* Download SBL image */
+	/* Download image using BHI */
 	memcpy(buf, firmware->data, size);
-	ret = mhi_fw_load_sbl(mhi_cntrl, dma_addr, size);
+	ret = mhi_fw_load_bhi(mhi_cntrl, dma_addr, size);
 	mhi_free_coherent(mhi_cntrl, size, buf, dma_addr);
 
 	if (!mhi_cntrl->fbc_download || ret || mhi_cntrl->ee == MHI_EE_EDL)
@@ -459,7 +459,7 @@  void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 
 	/* Error or in EDL mode, we're done */
 	if (ret) {
-		dev_err(dev, "MHI did not load SBL, ret:%d\n", ret);
+		dev_err(dev, "MHI did not load image over BHI, ret: %d\n", ret);
 		return;
 	}
 
@@ -509,11 +509,12 @@  void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 
 	/* Start full firmware image download */
 	image_info = mhi_cntrl->fbc_image;
-	ret = mhi_fw_load_amss(mhi_cntrl,
+	ret = mhi_fw_load_bhie(mhi_cntrl,
 			       /* Vector table is the last entry */
 			       &image_info->mhi_buf[image_info->entries - 1]);
 	if (ret)
-		dev_err(dev, "MHI did not load AMSS, ret:%d\n", ret);
+		dev_err(dev, "MHI did not load image over BHIe, ret: %d\n",
+			ret);
 
 	release_firmware(firmware);