diff mbox series

[v2,2/2] mhi: pci_generic: Introduce quectel EM1XXGR-L support

Message ID 1612864306-10108-2-git-send-email-loic.poulain@linaro.org (mailing list archive)
State Superseded
Headers show
Series [v2,1/2] mhi: pci_generic: Parametrable element count for events | expand

Commit Message

Loic Poulain Feb. 9, 2021, 9:51 a.m. UTC 
Add support for EM1XXGR-L modems, this modem series is based on SDX24
qcom chip. The modem is mainly based on MBIM protocol for both the
data and control path. The drivers for these channels (mhi-net-mbim and
mhi_uci) are not yet part of the kernel but will be integrated by
different series.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---
 v2: Specify 256 elements for the hardware event rings

 drivers/bus/mhi/pci_generic.c | 73 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)
diff mbox series

Patch

diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c
index c58bf96..56bd9ed 100644
--- a/drivers/bus/mhi/pci_generic.c
+++ b/drivers/bus/mhi/pci_generic.c
@@ -114,6 +114,36 @@  struct mhi_pci_dev_info {
 		.doorbell_mode_switch = true,		\
 	}
 
+#define MHI_CHANNEL_CONFIG_UL_SBL(ch_num, ch_name, el_count, ev_ring) \
+	{						\
+		.num = ch_num,				\
+		.name = ch_name,			\
+		.num_elements = el_count,		\
+		.event_ring = ev_ring,			\
+		.dir = DMA_TO_DEVICE,			\
+		.ee_mask = BIT(MHI_EE_SBL),		\
+		.pollcfg = 0,				\
+		.doorbell = MHI_DB_BRST_DISABLE,	\
+		.lpm_notify = false,			\
+		.offload_channel = false,		\
+		.doorbell_mode_switch = false,		\
+	}						\
+
+#define MHI_CHANNEL_CONFIG_DL_SBL(ch_num, ch_name, el_count, ev_ring) \
+	{						\
+		.num = ch_num,				\
+		.name = ch_name,			\
+		.num_elements = el_count,		\
+		.event_ring = ev_ring,			\
+		.dir = DMA_FROM_DEVICE,			\
+		.ee_mask = BIT(MHI_EE_SBL),		\
+		.pollcfg = 0,				\
+		.doorbell = MHI_DB_BRST_DISABLE,	\
+		.lpm_notify = false,			\
+		.offload_channel = false,		\
+		.doorbell_mode_switch = false,		\
+	}
+
 #define MHI_EVENT_CONFIG_DATA(ev_ring, el_count) \
 	{					\
 		.num_elements = el_count,	\
@@ -182,9 +212,52 @@  static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = {
 	.dma_data_width = 32
 };
 
+static const struct mhi_channel_config mhi_quectel_em1xx_channels[] = {
+	MHI_CHANNEL_CONFIG_UL(0, "NMEA", 16, 0),
+	MHI_CHANNEL_CONFIG_DL(1, "NMEA", 16, 0),
+	MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 16, 0),
+	MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 16, 0),
+	MHI_CHANNEL_CONFIG_UL(4, "DIAG", 16, 1),
+	MHI_CHANNEL_CONFIG_DL(5, "DIAG", 16, 1),
+	MHI_CHANNEL_CONFIG_UL(12, "MBIM", 16, 0),
+	MHI_CHANNEL_CONFIG_DL(13, "MBIM", 16, 0),
+	MHI_CHANNEL_CONFIG_UL(32, "DUN", 8, 0),
+	MHI_CHANNEL_CONFIG_DL(33, "DUN", 8, 0),
+	MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
+	MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
+};
+
+static struct mhi_event_config mhi_quectel_em1xx_events[] = {
+	MHI_EVENT_CONFIG_CTRL(0, 128),
+	MHI_EVENT_CONFIG_DATA(1, 128),
+	MHI_EVENT_CONFIG_HW_DATA(2, 256, 100),
+	MHI_EVENT_CONFIG_HW_DATA(3, 256, 101)
+};
+
+static struct mhi_controller_config modem_quectel_em1xx_config = {
+	.max_channels = 128,
+	.timeout_ms = 8000,
+	.num_channels = ARRAY_SIZE(mhi_quectel_em1xx_channels),
+	.ch_cfg = mhi_quectel_em1xx_channels,
+	.num_events = ARRAY_SIZE(mhi_quectel_em1xx_events),
+	.event_cfg = mhi_quectel_em1xx_events,
+};
+
+static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = {
+	.name = "quectel-em1xx",
+	.edl = "quectel/prog_firehose_sdx24.mbn",
+	.config = &modem_quectel_em1xx_config,
+	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+	.dma_data_width = 32
+};
+
 static const struct pci_device_id mhi_pci_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306),
 		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info },
+	{ PCI_DEVICE(0x1eac, 0x1001), /* EM120R-GL (sdx24) */
+		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
+	{ PCI_DEVICE(0x1eac, 0x1002), /* EM160R-GL (sdx24) */
+		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
 	{  }
 };
 MODULE_DEVICE_TABLE(pci, mhi_pci_id_table);