| Message ID | 1614615911-18794-3-git-send-email-loic.poulain@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/6] mhi: pci_generic: Parametrable element count for events | expand |
On Mon, Mar 01, 2021 at 05:25:08PM +0100, Loic Poulain wrote: > Add generic info for SDX24 based modems. Also add the FIREHOSE channels > used by the flash-programmer firmware loaded in EDL mode. > > Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Thanks, Mani > --- > drivers/bus/mhi/pci_generic.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c > index 00a0410..87bab93 100644 > --- a/drivers/bus/mhi/pci_generic.c > +++ b/drivers/bus/mhi/pci_generic.c > @@ -212,6 +212,14 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = { > .dma_data_width = 32 > }; > > +static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = { > + .name = "qcom-sdx24", > + .edl = "qcom/prog_firehose_sdx24.mbn", > + .config = &modem_qcom_v1_mhiv_config, > + .bar_num = MHI_PCI_DEFAULT_BAR_NUM, > + .dma_data_width = 32 > +}; > + > static const struct mhi_channel_config mhi_quectel_em1xx_channels[] = { > MHI_CHANNEL_CONFIG_UL(0, "NMEA", 32, 0), > MHI_CHANNEL_CONFIG_DL(1, "NMEA", 32, 0), > @@ -254,6 +262,8 @@ static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = { > static const struct pci_device_id mhi_pci_id_table[] = { > { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306), > .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info }, > + { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304), > + .driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info }, > { PCI_DEVICE(0x1eac, 0x1001), /* EM120R-GL (sdx24) */ > .driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info }, > { PCI_DEVICE(0x1eac, 0x1002), /* EM160R-GL (sdx24) */ > -- > 2.7.4 >
diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c index 00a0410..87bab93 100644 --- a/drivers/bus/mhi/pci_generic.c +++ b/drivers/bus/mhi/pci_generic.c @@ -212,6 +212,14 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = { .dma_data_width = 32 }; +static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = { + .name = "qcom-sdx24", + .edl = "qcom/prog_firehose_sdx24.mbn", + .config = &modem_qcom_v1_mhiv_config, + .bar_num = MHI_PCI_DEFAULT_BAR_NUM, + .dma_data_width = 32 +}; + static const struct mhi_channel_config mhi_quectel_em1xx_channels[] = { MHI_CHANNEL_CONFIG_UL(0, "NMEA", 32, 0), MHI_CHANNEL_CONFIG_DL(1, "NMEA", 32, 0), @@ -254,6 +262,8 @@ static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = { static const struct pci_device_id mhi_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info }, + { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304), + .driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info }, { PCI_DEVICE(0x1eac, 0x1001), /* EM120R-GL (sdx24) */ .driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info }, { PCI_DEVICE(0x1eac, 0x1002), /* EM160R-GL (sdx24) */
Add generic info for SDX24 based modems. Also add the FIREHOSE channels used by the flash-programmer firmware loaded in EDL mode. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> --- drivers/bus/mhi/pci_generic.c | 10 ++++++++++ 1 file changed, 10 insertions(+)