diff mbox series

[v2] drm/msm/dp: handle irq_hpd with sink_count = 0 correctly

Message ID 1620840558-28684-1-git-send-email-khsieh@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series [v2] drm/msm/dp: handle irq_hpd with sink_count = 0 correctly | expand

Commit Message

Kuogee Hsieh May 12, 2021, 5:29 p.m. UTC
irq_hpd interrupt should be handled after dongle plugged in and
before dongle unplugged. Hence irq_hpd interrupt is enabled at
the end of the plugin handle and disabled at the beginning of
unplugged handle. Current irq_hpd with sink_count = 0 is wrongly
handled same as the dongle unplugged which tears down the mainlink
and disables the phy. This patch fixes this problem by only tearing
down the mainlink but keeping phy enabled at irq_hpd with
sink_count = 0 handle so that next irq_hpe with sink_count =1 can be
handled by setup mainlink only.

Changes in v2:
-- add ctrl->phy_Power_count

Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
---
 drivers/gpu/drm/msm/dp/dp_catalog.c |  5 +--
 drivers/gpu/drm/msm/dp/dp_ctrl.c    | 83 ++++++++++++++++++++++++++++++++++---
 drivers/gpu/drm/msm/dp/dp_ctrl.h    |  2 +
 drivers/gpu/drm/msm/dp/dp_display.c | 46 +++++++++++++++-----
 4 files changed, 118 insertions(+), 18 deletions(-)

Comments

Stephen Boyd May 12, 2021, 6:50 p.m. UTC | #1
Quoting Kuogee Hsieh (2021-05-12 10:29:18)
> irq_hpd interrupt should be handled after dongle plugged in and
> before dongle unplugged. Hence irq_hpd interrupt is enabled at
> the end of the plugin handle and disabled at the beginning of
> unplugged handle. Current irq_hpd with sink_count = 0 is wrongly
> handled same as the dongle unplugged which tears down the mainlink
> and disables the phy. This patch fixes this problem by only tearing
> down the mainlink but keeping phy enabled at irq_hpd with
> sink_count = 0 handle so that next irq_hpe with sink_count =1 can be
> handled by setup mainlink only.
>
> Changes in v2:
> -- add ctrl->phy_Power_count
>
> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/dp/dp_catalog.c |  5 +--
>  drivers/gpu/drm/msm/dp/dp_ctrl.c    | 83 ++++++++++++++++++++++++++++++++++---
>  drivers/gpu/drm/msm/dp/dp_ctrl.h    |  2 +
>  drivers/gpu/drm/msm/dp/dp_display.c | 46 +++++++++++++++-----
>  4 files changed, 118 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
> index b1a9b1b..f4f53f2 100644
> --- a/drivers/gpu/drm/msm/dp/dp_catalog.c
> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
> @@ -582,10 +582,9 @@ void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog)
>
>         u32 reftimer = dp_read_aux(catalog, REG_DP_DP_HPD_REFTIMER);
>
> -       /* enable HPD interrupts */
> +       /* enable HPD plug and unplug interrupts */
>         dp_catalog_hpd_config_intr(dp_catalog,
> -               DP_DP_HPD_PLUG_INT_MASK | DP_DP_IRQ_HPD_INT_MASK
> -               | DP_DP_HPD_UNPLUG_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, true);
> +               DP_DP_HPD_PLUG_INT_MASK | DP_DP_HPD_UNPLUG_INT_MASK, true);
>
>         /* Configure REFTIMER and enable it */
>         reftimer |= DP_DP_HPD_REFTIMER_ENABLE;
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> index 8d59eb9..b5bed5f 100644
> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> @@ -77,6 +77,8 @@ struct dp_ctrl_private {
>         struct dp_parser *parser;
>         struct dp_catalog *catalog;
>
> +       int phy_power_count;

This is still redundant. Please restructure the code to call the power
on/off function in one place and the init/exit function in another so
that we don't have to reference count it.
Kuogee Hsieh May 12, 2021, 11:30 p.m. UTC | #2
On 2021-05-12 11:50, Stephen Boyd wrote:
> Quoting Kuogee Hsieh (2021-05-12 10:29:18)
>> irq_hpd interrupt should be handled after dongle plugged in and
>> before dongle unplugged. Hence irq_hpd interrupt is enabled at
>> the end of the plugin handle and disabled at the beginning of
>> unplugged handle. Current irq_hpd with sink_count = 0 is wrongly
>> handled same as the dongle unplugged which tears down the mainlink
>> and disables the phy. This patch fixes this problem by only tearing
>> down the mainlink but keeping phy enabled at irq_hpd with
>> sink_count = 0 handle so that next irq_hpe with sink_count =1 can be
>> handled by setup mainlink only.
>> 
>> Changes in v2:
>> -- add ctrl->phy_Power_count
>> 
>> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
>> ---
>>  drivers/gpu/drm/msm/dp/dp_catalog.c |  5 +--
>>  drivers/gpu/drm/msm/dp/dp_ctrl.c    | 83 
>> ++++++++++++++++++++++++++++++++++---
>>  drivers/gpu/drm/msm/dp/dp_ctrl.h    |  2 +
>>  drivers/gpu/drm/msm/dp/dp_display.c | 46 +++++++++++++++-----
>>  4 files changed, 118 insertions(+), 18 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c 
>> b/drivers/gpu/drm/msm/dp/dp_catalog.c
>> index b1a9b1b..f4f53f2 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_catalog.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
>> @@ -582,10 +582,9 @@ void dp_catalog_ctrl_hpd_config(struct dp_catalog 
>> *dp_catalog)
>> 
>>         u32 reftimer = dp_read_aux(catalog, REG_DP_DP_HPD_REFTIMER);
>> 
>> -       /* enable HPD interrupts */
>> +       /* enable HPD plug and unplug interrupts */
>>         dp_catalog_hpd_config_intr(dp_catalog,
>> -               DP_DP_HPD_PLUG_INT_MASK | DP_DP_IRQ_HPD_INT_MASK
>> -               | DP_DP_HPD_UNPLUG_INT_MASK | 
>> DP_DP_HPD_REPLUG_INT_MASK, true);
>> +               DP_DP_HPD_PLUG_INT_MASK | DP_DP_HPD_UNPLUG_INT_MASK, 
>> true);
>> 
>>         /* Configure REFTIMER and enable it */
>>         reftimer |= DP_DP_HPD_REFTIMER_ENABLE;
>> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c 
>> b/drivers/gpu/drm/msm/dp/dp_ctrl.c
>> index 8d59eb9..b5bed5f 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
>> @@ -77,6 +77,8 @@ struct dp_ctrl_private {
>>         struct dp_parser *parser;
>>         struct dp_catalog *catalog;
>> 
>> +       int phy_power_count;
> 
> This is still redundant. Please restructure the code to call the power
> on/off function in one place and the init/exit function in another so
> that we don't have to reference count it.

ok, v3 patch uploaded
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
index b1a9b1b..f4f53f2 100644
--- a/drivers/gpu/drm/msm/dp/dp_catalog.c
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
@@ -582,10 +582,9 @@  void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog)
 
 	u32 reftimer = dp_read_aux(catalog, REG_DP_DP_HPD_REFTIMER);
 
-	/* enable HPD interrupts */
+	/* enable HPD plug and unplug interrupts */
 	dp_catalog_hpd_config_intr(dp_catalog,
-		DP_DP_HPD_PLUG_INT_MASK | DP_DP_IRQ_HPD_INT_MASK
-		| DP_DP_HPD_UNPLUG_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, true);
+		DP_DP_HPD_PLUG_INT_MASK | DP_DP_HPD_UNPLUG_INT_MASK, true);
 
 	/* Configure REFTIMER and enable it */
 	reftimer |= DP_DP_HPD_REFTIMER_ENABLE;
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 8d59eb9..b5bed5f 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -77,6 +77,8 @@  struct dp_ctrl_private {
 	struct dp_parser *parser;
 	struct dp_catalog *catalog;
 
+	int phy_power_count;
+
 	struct opp_table *opp_table;
 
 	struct completion idle_comp;
@@ -1334,8 +1336,11 @@  static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private *ctrl)
 	dp_ctrl_set_clock_rate(ctrl, DP_CTRL_PM, "ctrl_link",
 					ctrl->link->link_params.rate * 1000);
 
-	phy_configure(phy, &dp_io->phy_opts);
-	phy_power_on(phy);
+	if (!ctrl->phy_power_count) {
+		phy_configure(phy, &dp_io->phy_opts);
+		phy_power_on(phy);
+		ctrl->phy_power_count++;
+	}
 
 	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, true);
 	if (ret)
@@ -1414,6 +1419,12 @@  void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
 	phy = dp_io->phy;
 
 	dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
+
+	if (ctrl->phy_power_count) {
+		phy_power_off(phy);
+		ctrl->phy_power_count--;
+	}
+
 	phy_exit(phy);
 
 	DRM_DEBUG_DP("Host deinitialized successfully\n");
@@ -1456,7 +1467,12 @@  static int dp_ctrl_reinitialize_mainlink(struct dp_ctrl_private *ctrl)
 		DRM_ERROR("Failed to disable clocks. ret=%d\n", ret);
 		return ret;
 	}
-	phy_power_off(phy);
+
+	if (ctrl->phy_power_count) {
+		phy_power_off(phy);
+		ctrl->phy_power_count--;
+	}
+
 	/* hw recommended delay before re-enabling clocks */
 	msleep(20);
 
@@ -1487,7 +1503,11 @@  static int dp_ctrl_deinitialize_mainlink(struct dp_ctrl_private *ctrl)
 		DRM_ERROR("Failed to disable link clocks. ret=%d\n", ret);
 	}
 
-	phy_power_off(phy);
+	if (ctrl->phy_power_count) {
+		phy_power_off(phy);
+		ctrl->phy_power_count--;
+	}
+
 	phy_exit(phy);
 
 	return 0;
@@ -1811,6 +1831,55 @@  int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl)
 	return ret;
 }
 
+int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+	int ret = 0;
+
+	if (!dp_ctrl)
+		return -EINVAL;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
+
+	ret = dp_power_clk_enable(ctrl->power, DP_STREAM_PM, false);
+	if (ret)
+		DRM_ERROR("Failed to disable pixel clocks. ret=%d\n", ret);
+
+	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
+	if (ret)
+		DRM_ERROR("Failed to disable link clocks. ret=%d\n", ret);
+
+	DRM_DEBUG_DP("DP off link/stream done\n");
+	return ret;
+}
+
+void dp_ctrl_off_phy(struct dp_ctrl *dp_ctrl)
+{
+	struct dp_ctrl_private *ctrl;
+	struct dp_io *dp_io;
+	struct phy *phy;
+
+	if (!dp_ctrl)
+		return;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+	dp_io = &ctrl->parser->io;
+	phy = dp_io->phy;
+
+	dp_catalog_ctrl_reset(ctrl->catalog);
+
+	if (ctrl->phy_power_count) {
+		phy_power_off(phy);
+		ctrl->phy_power_count--;
+	}
+
+	phy_exit(phy);
+
+	DRM_DEBUG_DP("DP off phy done\n");
+}
+
 int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
 {
 	struct dp_ctrl_private *ctrl;
@@ -1838,7 +1907,11 @@  int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
 		DRM_ERROR("Failed to disable link clocks. ret=%d\n", ret);
 	}
 
-	phy_power_off(phy);
+	if (ctrl->phy_power_count) {
+		phy_power_off(phy);
+		ctrl->phy_power_count--;
+	}
+
 	phy_exit(phy);
 
 	DRM_DEBUG_DP("DP off done\n");
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h
index a836bd3..25e4f75 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.h
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
@@ -23,6 +23,8 @@  int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip, bool reset);
 void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl);
+int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_off_phy(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
 void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
 void dp_ctrl_isr(struct dp_ctrl *dp_ctrl);
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 0ba71c7..c2b2050 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -570,6 +570,10 @@  static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
 		dp_add_event(dp, EV_CONNECT_PENDING_TIMEOUT, 0, tout);
 	}
 
+	/* enable HDP irq_hpd/replug interrupt */
+	dp_catalog_hpd_config_intr(dp->catalog,
+		DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, true);
+
 	mutex_unlock(&dp->event_mutex);
 
 	/* uevent will complete connection part */
@@ -619,7 +623,26 @@  static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 	mutex_lock(&dp->event_mutex);
 
 	state = dp->hpd_state;
-	if (state == ST_DISCONNECT_PENDING || state == ST_DISCONNECTED) {
+
+	/* disable irq_hpd/replug interrupts */
+	dp_catalog_hpd_config_intr(dp->catalog,
+		DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, false);
+
+	/* unplugged, no more irq_hpd handle */
+	dp_del_event(dp, EV_IRQ_HPD_INT);
+
+	if (state == ST_DISCONNECTED) {
+		/* triggered by irq_hdp with sink_count = 0 */
+		if (dp->link->sink_count == 0) {
+			dp_ctrl_off_phy(dp->ctrl);
+			hpd->hpd_high = 0;
+			dp->core_initialized = false;
+		}
+		mutex_unlock(&dp->event_mutex);
+		return 0;
+	}
+
+	if (state == ST_DISCONNECT_PENDING) {
 		mutex_unlock(&dp->event_mutex);
 		return 0;
 	}
@@ -633,9 +656,8 @@  static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 
 	dp->hpd_state = ST_DISCONNECT_PENDING;
 
-	/* disable HPD plug interrupt until disconnect is done */
-	dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK
-				| DP_DP_IRQ_HPD_INT_MASK, false);
+	/* disable HPD plug interrupts */
+	dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
 
 	hpd->hpd_high = 0;
 
@@ -652,8 +674,8 @@  static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 	reinit_completion(&dp->audio_comp);
 	dp_display_handle_plugged_change(g_dp_display, false);
 
-	dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK |
-					DP_DP_IRQ_HPD_INT_MASK, true);
+	/* enable HDP plug interrupt to prepare for next plugin */
+	dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, true);
 
 	/* uevent will complete disconnection part */
 	mutex_unlock(&dp->event_mutex);
@@ -684,7 +706,7 @@  static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data)
 
 	/* irq_hpd can happen at either connected or disconnected state */
 	state =  dp->hpd_state;
-	if (state == ST_DISPLAY_OFF) {
+	if (state == ST_DISPLAY_OFF || state == ST_SUSPENDED) {
 		mutex_unlock(&dp->event_mutex);
 		return 0;
 	}
@@ -903,9 +925,13 @@  static int dp_display_disable(struct dp_display_private *dp, u32 data)
 
 	dp_display->audio_enabled = false;
 
-	dp_ctrl_off(dp->ctrl);
-
-	dp->core_initialized = false;
+	/* triggered by irq_hpd with sink_count = 0 */
+	if (dp->link->sink_count == 0) {
+		dp_ctrl_off_link_stream(dp->ctrl);
+	} else {
+		dp_ctrl_off(dp->ctrl);
+		dp->core_initialized = false;
+	}
 
 	dp_display->power_on = false;