deleted file mode 100644
@@ -1,140 +0,0 @@
-Qualcomm Technology Inc. Hexagon v56 Peripheral Image Loader
-
-This document defines the binding for a component that loads and boots firmware
-on the Qualcomm Technology Inc. Hexagon v56 core.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,qcs404-cdsp-pil",
- "qcom,sdm845-adsp-pil"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: must specify the base address and size of the qdsp6ss register
-
-- interrupts-extended:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: must list the watchdog, fatal IRQs ready, handover and
- stop-ack IRQs
-
-- interrupt-names:
- Usage: required
- Value type: <stringlist>
- Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
-
-- clocks:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: List of phandles and clock specifier pairs for the Hexagon,
- per clock-names below.
-
-- clock-names:
- Usage: required for SDM845 ADSP
- Value type: <stringlist>
- Definition: List of clock input name strings sorted in the same
- order as the clocks property. Definition must have
- "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr",
- "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep"
- and "qdsp6ss_core".
-
-- clock-names:
- Usage: required for QCS404 CDSP
- Value type: <stringlist>
- Definition: List of clock input name strings sorted in the same
- order as the clocks property. Definition must have
- "xo", "sway", "tbu", "bimc", "ahb_aon", "q6ss_slave",
- "q6ss_master", "q6_axim".
-
-- power-domains:
- Usage: required
- Value type: <phandle>
- Definition: reference to cx power domain node.
-
-- resets:
- Usage: required
- Value type: <phandle>
- Definition: reference to the list of resets for the Hexagon.
-
-- reset-names:
- Usage: required for SDM845 ADSP
- Value type: <stringlist>
- Definition: must be "pdc_sync" and "cc_lpass"
-
-- reset-names:
- Usage: required for QCS404 CDSP
- Value type: <stringlist>
- Definition: must be "restart"
-
-- qcom,halt-regs:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: a phandle reference to a syscon representing TCSR followed
- by the offset within syscon for Hexagon halt register.
-
-- memory-region:
- Usage: required
- Value type: <phandle>
- Definition: reference to the reserved-memory for the firmware
-
-- qcom,smem-states:
- Usage: required
- Value type: <phandle>
- Definition: reference to the smem state for requesting the Hexagon to
- shut down
-
-- qcom,smem-state-names:
- Usage: required
- Value type: <stringlist>
- Definition: must be "stop"
-
-
-= SUBNODES
-The adsp node may have an subnode named "glink-edge" that describes the
-communication edge, channels and devices related to the Hexagon.
-See ../soc/qcom/qcom,glink.txt for details on how to describe these.
-
-= EXAMPLE
-The following example describes the resources needed to boot control the
-ADSP, as it is found on SDM845 boards.
-
- remoteproc@17300000 {
- compatible = "qcom,sdm845-adsp-pil";
- reg = <0x17300000 0x40c>;
-
- interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_LPASS_SWAY_CLK>,
- <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
- <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
- <&lpasscc LPASS_QDSP6SS_XO_CLK>,
- <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
- <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
- clock-names = "xo", "sway_cbcr",
- "lpass_ahbs_aon_cbcr",
- "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
- "qdsp6ss_sleep", "qdsp6ss_core";
-
- power-domains = <&rpmhpd SDM845_CX>;
-
- resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
- <&aoss_reset AOSS_CC_LPASS_RESTART>;
- reset-names = "pdc_sync", "cc_lpass";
-
- qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
-
- memory-region = <&pil_adsp_mem>;
-
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
- };
new file mode 100644
@@ -0,0 +1,292 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,hexagon-v56.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Hexagon v56 Peripheral Image Loader
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This document defines the binding for a component that loads and boots firmware
+ on the Qualcomm Technology Inc. Hexagon v56 core.
+
+properties:
+ compatible:
+ enum:
+ - qcom,qcs404-cdsp-pil
+ - qcom,sdm845-adsp-pil
+
+ reg:
+ maxItems: 1
+ description:
+ The base address and size of the qdsp6ss register
+
+ interrupts-extended:
+ minItems: 5
+ maxItems: 5
+
+ interrupt-names:
+ minItems: 5
+ maxItems: 5
+
+ clocks:
+ minItems: 7
+ maxItems: 8
+ description:
+ List of phandles and clock specifier pairs for the Hexagon,
+ per clock-names below.
+
+ clock-names:
+ minItems: 7
+ maxItems: 8
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ minItems: 1
+ maxItems: 2
+ description:
+ reference to the list of resets for the Hexagon.
+
+ reset-names:
+ minItems: 1
+ maxItems: 2
+
+ memory-region:
+ maxItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
+ qcom,halt-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Phandle reference to a syscon representing TCSR followed by the
+ three offsets within syscon for q6, modem and nc halt registers.
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the Hexagon core
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description: The names of the state bits used for SMP2P output
+ items:
+ - const: stop
+
+ glink-edge:
+ type: object
+ description:
+ Qualcomm G-Link subnode which represents communication edge, channels
+ and devices related to the ADSP.
+
+required:
+ - compatible
+ - reg
+ - interrupts-extended
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+ - qcom,halt-regs
+ - memory-region
+ - qcom,smem-states
+ - qcom,smem-state-names
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,qcs404-cdsp-pil
+ - qcom,sdm845-adsp-pil
+ then:
+ properties:
+ interrupts-extended:
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+ interrupt-names:
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sdm845-adsp-pil
+ then:
+ properties:
+ clocks:
+ items:
+ - description: XO clock
+ - description: SWAY clock
+ - description: LPASS AHBS AON clock
+ - description: LPASS AHBM AON clock
+ - description: QDSP6SS XO clock
+ - description: QDSP6SS SLEEP clock
+ - description: QDSP6SS CORE clock
+ clock-names:
+ items:
+ - const: xo
+ - const: sway_cbcr
+ - const: lpass_ahbs_aon_cbcr
+ - const: lpass_ahbm_aon_cbcr
+ - const: qdsp6ss_xo
+ - const: qdsp6ss_sleep
+ - const: qdsp6ss_core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,qcs404-cdsp-pil
+ then:
+ properties:
+ clocks:
+ items:
+ - description: XO clock
+ - description: SWAY clock
+ - description: TBU clock
+ - description: BIMC clock
+ - description: AHB AON clock
+ - description: Q6SS SLAVE clock
+ - description: Q6SS MASTER clock
+ - description: Q6 AXIM clock
+ clock-names:
+ items:
+ - const: xo
+ - const: sway
+ - const: tbu
+ - const: bimc
+ - const: ahb_aon
+ - const: q6ss_slave
+ - const: q6ss_master
+ - const: q6_axim
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7280-wpss-pil
+ then:
+ properties:
+ clocks:
+ items:
+ - description: GCC WPSS AHB BDG Master clock
+ - description: GCC WPSS AHB clock
+ - description: GCC WPSS RSCP clock
+ clock-names:
+ items:
+ - const: gcc_wpss_ahb_bdg_mst_clk
+ - const: gcc_wpss_ahb_clk
+ - const: gcc_wpss_rscp_clk
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,qcs404-cdsp-pil
+ - qcom,sdm845-adsp-pil
+ then:
+ properties:
+ power-domains:
+ items:
+ - description: CX power domain
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sdm845-adsp-pil
+ then:
+ properties:
+ resets:
+ items:
+ - description: PDC SYNC
+ - description: CC LPASS
+ reset-names:
+ items:
+ - const: pdc_sync
+ - const: cc_lpass
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,qcs404-cdsp-pil
+ then:
+ properties:
+ resets:
+ items:
+ - description: CDSP restart
+ reset-names:
+ items:
+ - const: restart
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,lpass-sdm845.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+ #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+ remoteproc@17300000 {
+ compatible = "qcom,sdm845-adsp-pil";
+ reg = <0x17300000 0x40c>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_LPASS_SWAY_CLK>,
+ <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
+ <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
+ <&lpasscc LPASS_QDSP6SS_XO_CLK>,
+ <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
+ <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
+ clock-names = "xo", "sway_cbcr",
+ "lpass_ahbs_aon_cbcr",
+ "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
+ "qdsp6ss_sleep", "qdsp6ss_core";
+
+ power-domains = <&rpmhpd SDM845_CX>;
+
+ resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
+ <&aoss_reset AOSS_CC_LPASS_RESTART>;
+ reset-names = "pdc_sync", "cc_lpass";
+
+ qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+ };
Convert Qualcomm ADSP/CDSP Remoteproc devicetree binding to YAML. Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> --- .../bindings/remoteproc/qcom,hexagon-v56.txt | 140 ---------- .../bindings/remoteproc/qcom,hexagon-v56.yaml | 292 +++++++++++++++++++++ 2 files changed, 292 insertions(+), 140 deletions(-) delete mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml