diff mbox series

[v7,08/13] arm64: dts: qcom: sm8150: Use QMP property to control load state

Message ID 1631800770-371-9-git-send-email-sibis@codeaurora.org (mailing list archive)
State Accepted
Headers show
Series Use qmp_send to update co-processor load state | expand

Commit Message

Sibi Sankar Sept. 16, 2021, 1:59 p.m. UTC 
Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SM8150 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

Comments

Bjorn Andersson Sept. 27, 2021, 8:53 p.m. UTC | #1 
On Thu, 16 Sep 2021 19:29:25 +0530, Sibi Sankar wrote:
> Use the Qualcomm Mailbox Protocol (QMP) property to control the load
> state resources on SM8150 SoCs and drop deprecated power-domains exposed
> by AOSS QMP node.
> 
> 

Applied, thanks!

[08/13] arm64: dts: qcom: sm8150: Use QMP property to control load state
        commit: d9d327f6a37f85a975cf9df9ecff60337586e7b0

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index ef0232c2cf45..8a035693b7a3 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -6,7 +6,6 @@ 
 
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -1729,13 +1728,14 @@ 
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
-					<&rpmhpd 3>,
+			power-domains = <&rpmhpd 3>,
 					<&rpmhpd 2>;
-			power-domain-names = "load_state", "lcx", "lmx";
+			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&slpi_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&slpi_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2319,13 +2319,14 @@ 
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
-					<&rpmhpd 7>,
+			power-domains = <&rpmhpd 7>,
 					<&rpmhpd 0>;
-			power-domain-names = "load_state", "cx", "mss";
+			power-domain-names = "cx", "mss";
 
 			memory-region = <&mpss_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2945,12 +2946,12 @@ 
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
-					<&rpmhpd 7>;
-			power-domain-names = "load_state", "cx";
+			power-domains = <&rpmhpd 7>;
 
 			memory-region = <&cdsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&cdsp_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -3174,7 +3175,6 @@ 
 			mboxes = <&apss_shared 0>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		tsens0: thermal-sensor@c263000 {
@@ -3321,12 +3321,12 @@ 
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
-					<&rpmhpd 7>;
-			power-domain-names = "load_state", "cx";
+			power-domains = <&rpmhpd 7>;
 
 			memory-region = <&adsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&adsp_smp2p_out 0>;
 			qcom,smem-state-names = "stop";