diff mbox series

[v5,10/10] arm64: dts: qcom: sc7280: Update Q6V5 MSS node

Message ID 1631886935-14691-11-git-send-email-sibis@codeaurora.org (mailing list archive)
State Accepted
Headers show
Series Add Modem support on SC7280 SoCs | expand

Commit Message

Sibi Sankar Sept. 17, 2021, 1:55 p.m. UTC 
Update MSS node to support MSA based modem boot on SC7280 SoCs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---

v5:
 * Add pka to the clock list to boot secure modem devices.

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi |  7 +++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi     | 19 ++++++++++++++++---
 2 files changed, 23 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 21f29645d648..a50217722f1d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -267,6 +267,13 @@ 
 	status = "okay";
 };
 
+&remoteproc_mpss {
+	status = "okay";
+	compatible = "qcom,sc7280-mss-pil";
+	iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+	memory-region = <&mba_mem &mpss_mem>;
+};
+
 &sdhc_1 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 2b9c28329f1e..85622c64774d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -701,7 +701,8 @@ 
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sc7280-mpss-pas";
-			reg = <0 0x04080000 0 0x10000>;
+			reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
+			reg-names = "qdsp6", "rmb";
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -712,8 +713,12 @@ 
 			interrupt-names = "wdog", "fatal", "ready", "handover",
 					  "stop-ack", "shutdown-ack";
 
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&rpmhcc RPMH_PKA_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "offline", "snoc_axi", "pka", "xo";
 
 			power-domains = <&rpmhpd SC7280_CX>,
 					<&rpmhpd SC7280_MSS>;
@@ -726,6 +731,14 @@ 
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
+			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+			reset-names = "mss_restart", "pdc_reset";
+
+			qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
+			qcom,ext-regs = <&tcsr 0x10000 0x10004 &tcsr_mutex 0x26004 0x26008>;
+			qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>;
+
 			status = "disabled";
 
 			glink-edge {