@@ -3219,13 +3219,18 @@
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sc7180-aoss-qmp";
- reg = <0 0x0c300000 0 0x100000>;
+ reg = <0 0x0c300000 0 0x400>;
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 0>;
#clock-cells = <0>;
};
+ sram@c3f0000 {
+ compatible = "qcom,rpmh-stats";
+ reg = <0 0x0c3f0000 0 0x400>;
+ };
+
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0 0x0c440000 0 0x1100>,
@@ -2637,7 +2637,7 @@
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sc7280-aoss-qmp";
- reg = <0 0x0c300000 0 0x100000>;
+ reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
@@ -2647,6 +2647,11 @@
#clock-cells = <0>;
};
+ sram@c3f0000 {
+ compatible = "qcom,rpmh-stats";
+ reg = <0 0x0c3f0000 0 0x400>;
+ };
+
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0 0x0c440000 0 0x1100>,
@@ -3170,13 +3170,18 @@
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sm8150-aoss-qmp";
- reg = <0x0 0x0c300000 0x0 0x100000>;
+ reg = <0x0 0x0c300000 0x0 0x400>;
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 0>;
#clock-cells = <0>;
};
+ sram@c3f0000 {
+ compatible = "qcom,rpmh-stats";
+ reg = <0 0x0c3f0000 0 0x400>;
+ };
+
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
reg = <0 0x0c263000 0 0x1ff>, /* TM */
@@ -2899,7 +2899,7 @@
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sm8250-aoss-qmp";
- reg = <0 0x0c300000 0 0x100000>;
+ reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
@@ -2909,6 +2909,11 @@
#clock-cells = <0>;
};
+ sram@c3f0000 {
+ compatible = "qcom,rpmh-stats";
+ reg = <0 0x0c3f0000 0 0x400>;
+ };
+
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0 0x0c440000 0x0 0x0001100>,
@@ -788,7 +788,7 @@
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sm8350-aoss-qmp";
- reg = <0 0x0c300000 0 0x100000>;
+ reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
@@ -796,6 +796,11 @@
#clock-cells = <0>;
};
+ sram@c3f0000 {
+ compatible = "qcom,rpmh-stats";
+ reg = <0 0x0c3f0000 0 0x400>;
+ };
+
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0 0xc440000 0x0 0x1100>,
Add device node for Sleep stats driver which provides various low power mode stats on sc7180, sc7280, sm8150, sm8250 and sm8350. Also update the reg size of aoss_qmp device to 0x400. Cc: devicetree@vger.kernel.org Signed-off-by: Maulik Shah <mkshah@codeaurora.org> --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 7 ++++++- arch/arm64/boot/dts/qcom/sc7280.dtsi | 7 ++++++- arch/arm64/boot/dts/qcom/sm8150.dtsi | 7 ++++++- arch/arm64/boot/dts/qcom/sm8250.dtsi | 7 ++++++- arch/arm64/boot/dts/qcom/sm8350.dtsi | 7 ++++++- 5 files changed, 30 insertions(+), 5 deletions(-)