| Message ID | 1682033114-28483-4-git-send-email-quic_khsieh@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | add DSC 1.2 dpu supports | expand |
On 21/04/2023 02:25, Kuogee Hsieh wrote: > At current implementation, topology configuration is thrown away after > dpu_rm_reserve(). This patch save the topology so that it can be used > for DSC related calculation later. Please take a look at https://patchwork.freedesktop.org/patch/527960/?series=115283&rev=2 . > > Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 32 ++++++++++++++--------------- > 1 file changed, 16 insertions(+), 16 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > index ecb87bc..2fdacf1 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > @@ -542,13 +542,13 @@ bool dpu_encoder_use_dsc_merge(struct drm_encoder *drm_enc) > return (num_dsc > 0) && (num_dsc > intf_count); > } > > -static struct msm_display_topology dpu_encoder_get_topology( > +static void dpu_encoder_get_topology( > struct dpu_encoder_virt *dpu_enc, > struct dpu_kms *dpu_kms, > struct drm_display_mode *mode, > - struct drm_crtc_state *crtc_state) > + struct drm_crtc_state *crtc_state, > + struct msm_display_topology *topology) > { > - struct msm_display_topology topology = {0}; > int i, intf_count = 0; > > for (i = 0; i < MAX_PHYS_ENCODERS_PER_VIRTUAL; i++) > @@ -567,16 +567,16 @@ static struct msm_display_topology dpu_encoder_get_topology( > * Add dspps to the reservation requirements if ctm is requested > */ > if (intf_count == 2) > - topology.num_lm = 2; > + topology->num_lm = 2; > else if (!dpu_kms->catalog->caps->has_3d_merge) > - topology.num_lm = 1; > + topology->num_lm = 1; > else > - topology.num_lm = (mode->hdisplay > MAX_HDISPLAY_SPLIT) ? 2 : 1; > + topology->num_lm = (mode->hdisplay > MAX_HDISPLAY_SPLIT) ? 2 : 1; > > if (crtc_state->ctm) > - topology.num_dspp = topology.num_lm; > + topology->num_dspp = topology->num_lm; > > - topology.num_intf = intf_count; > + topology->num_intf = intf_count; > > if (dpu_enc->dsc) { > /* > @@ -585,12 +585,10 @@ static struct msm_display_topology dpu_encoder_get_topology( > * this is power optimal and can drive up to (including) 4k > * screens > */ > - topology.num_dsc = 2; > - topology.num_lm = 2; > - topology.num_intf = 1; > + topology->num_dsc = 2; > + topology->num_lm = 2; > + topology->num_intf = 1; > } > - > - return topology; > } > > static int dpu_encoder_virt_atomic_check( > @@ -602,7 +600,7 @@ static int dpu_encoder_virt_atomic_check( > struct msm_drm_private *priv; > struct dpu_kms *dpu_kms; > struct drm_display_mode *adj_mode; > - struct msm_display_topology topology; > + struct msm_display_topology *topology; > struct dpu_global_state *global_state; > int i = 0; > int ret = 0; > @@ -639,7 +637,9 @@ static int dpu_encoder_virt_atomic_check( > } > } > > - topology = dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode, crtc_state); > + topology = &dpu_enc->topology; > + memset(topology, 0, sizeof (*topology)); > + dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode, crtc_state, topology); > > /* > * Release and Allocate resources on every modeset > @@ -650,7 +650,7 @@ static int dpu_encoder_virt_atomic_check( > > if (!crtc_state->active_changed || crtc_state->enable) > ret = dpu_rm_reserve(&dpu_kms->rm, global_state, > - drm_enc, crtc_state, topology); > + drm_enc, crtc_state, *topology); > } > > trace_dpu_enc_atomic_check_flags(DRMID(drm_enc), adj_mode->flags);
On 4/20/2023 5:12 PM, Dmitry Baryshkov wrote: > On 21/04/2023 02:25, Kuogee Hsieh wrote: >> At current implementation, topology configuration is thrown away after >> dpu_rm_reserve(). This patch save the topology so that it can be used >> for DSC related calculation later. > > Please take a look at > https://patchwork.freedesktop.org/patch/527960/?series=115283&rev=2 . Let the review of this series go on and lets try to get the acks on the non-topology related pieces. I think 2/5 patches in this series are conflicting in the design. We will resolve that in a weeks time. Meanwhile, I think we can keep the reviews / versions going on the rest. I think we can move patch 5 of this series to patch 3. That way we get acks on patches 1-3 and patches 4 & 5 which deal with topology are dealt with together with virtual planes. I will review virtual planes next week and we will decide the best course of action. Moving resource allocation to CRTC needs to be thought of a bit deeper for DSC as that one is directly tied to encoder. > >> >> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> >> --- >> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 32 >> ++++++++++++++--------------- >> 1 file changed, 16 insertions(+), 16 deletions(-) >> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c >> index ecb87bc..2fdacf1 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c >> @@ -542,13 +542,13 @@ bool dpu_encoder_use_dsc_merge(struct >> drm_encoder *drm_enc) >> return (num_dsc > 0) && (num_dsc > intf_count); >> } >> -static struct msm_display_topology dpu_encoder_get_topology( >> +static void dpu_encoder_get_topology( >> struct dpu_encoder_virt *dpu_enc, >> struct dpu_kms *dpu_kms, >> struct drm_display_mode *mode, >> - struct drm_crtc_state *crtc_state) >> + struct drm_crtc_state *crtc_state, >> + struct msm_display_topology *topology) >> { >> - struct msm_display_topology topology = {0}; >> int i, intf_count = 0; >> for (i = 0; i < MAX_PHYS_ENCODERS_PER_VIRTUAL; i++) >> @@ -567,16 +567,16 @@ static struct msm_display_topology >> dpu_encoder_get_topology( >> * Add dspps to the reservation requirements if ctm is requested >> */ >> if (intf_count == 2) >> - topology.num_lm = 2; >> + topology->num_lm = 2; >> else if (!dpu_kms->catalog->caps->has_3d_merge) >> - topology.num_lm = 1; >> + topology->num_lm = 1; >> else >> - topology.num_lm = (mode->hdisplay > MAX_HDISPLAY_SPLIT) ? 2 : 1; >> + topology->num_lm = (mode->hdisplay > MAX_HDISPLAY_SPLIT) ? 2 >> : 1; >> if (crtc_state->ctm) >> - topology.num_dspp = topology.num_lm; >> + topology->num_dspp = topology->num_lm; >> - topology.num_intf = intf_count; >> + topology->num_intf = intf_count; >> if (dpu_enc->dsc) { >> /* >> @@ -585,12 +585,10 @@ static struct msm_display_topology >> dpu_encoder_get_topology( >> * this is power optimal and can drive up to (including) 4k >> * screens >> */ >> - topology.num_dsc = 2; >> - topology.num_lm = 2; >> - topology.num_intf = 1; >> + topology->num_dsc = 2; >> + topology->num_lm = 2; >> + topology->num_intf = 1; >> } >> - >> - return topology; >> } >> static int dpu_encoder_virt_atomic_check( >> @@ -602,7 +600,7 @@ static int dpu_encoder_virt_atomic_check( >> struct msm_drm_private *priv; >> struct dpu_kms *dpu_kms; >> struct drm_display_mode *adj_mode; >> - struct msm_display_topology topology; >> + struct msm_display_topology *topology; >> struct dpu_global_state *global_state; >> int i = 0; >> int ret = 0; >> @@ -639,7 +637,9 @@ static int dpu_encoder_virt_atomic_check( >> } >> } >> - topology = dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode, >> crtc_state); >> + topology = &dpu_enc->topology; >> + memset(topology, 0, sizeof (*topology)); >> + dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode, crtc_state, >> topology); >> /* >> * Release and Allocate resources on every modeset >> @@ -650,7 +650,7 @@ static int dpu_encoder_virt_atomic_check( >> if (!crtc_state->active_changed || crtc_state->enable) >> ret = dpu_rm_reserve(&dpu_kms->rm, global_state, >> - drm_enc, crtc_state, topology); >> + drm_enc, crtc_state, *topology); >> } >> trace_dpu_enc_atomic_check_flags(DRMID(drm_enc), adj_mode->flags); >
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index ecb87bc..2fdacf1 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -542,13 +542,13 @@ bool dpu_encoder_use_dsc_merge(struct drm_encoder *drm_enc) return (num_dsc > 0) && (num_dsc > intf_count); } -static struct msm_display_topology dpu_encoder_get_topology( +static void dpu_encoder_get_topology( struct dpu_encoder_virt *dpu_enc, struct dpu_kms *dpu_kms, struct drm_display_mode *mode, - struct drm_crtc_state *crtc_state) + struct drm_crtc_state *crtc_state, + struct msm_display_topology *topology) { - struct msm_display_topology topology = {0}; int i, intf_count = 0; for (i = 0; i < MAX_PHYS_ENCODERS_PER_VIRTUAL; i++) @@ -567,16 +567,16 @@ static struct msm_display_topology dpu_encoder_get_topology( * Add dspps to the reservation requirements if ctm is requested */ if (intf_count == 2) - topology.num_lm = 2; + topology->num_lm = 2; else if (!dpu_kms->catalog->caps->has_3d_merge) - topology.num_lm = 1; + topology->num_lm = 1; else - topology.num_lm = (mode->hdisplay > MAX_HDISPLAY_SPLIT) ? 2 : 1; + topology->num_lm = (mode->hdisplay > MAX_HDISPLAY_SPLIT) ? 2 : 1; if (crtc_state->ctm) - topology.num_dspp = topology.num_lm; + topology->num_dspp = topology->num_lm; - topology.num_intf = intf_count; + topology->num_intf = intf_count; if (dpu_enc->dsc) { /* @@ -585,12 +585,10 @@ static struct msm_display_topology dpu_encoder_get_topology( * this is power optimal and can drive up to (including) 4k * screens */ - topology.num_dsc = 2; - topology.num_lm = 2; - topology.num_intf = 1; + topology->num_dsc = 2; + topology->num_lm = 2; + topology->num_intf = 1; } - - return topology; } static int dpu_encoder_virt_atomic_check( @@ -602,7 +600,7 @@ static int dpu_encoder_virt_atomic_check( struct msm_drm_private *priv; struct dpu_kms *dpu_kms; struct drm_display_mode *adj_mode; - struct msm_display_topology topology; + struct msm_display_topology *topology; struct dpu_global_state *global_state; int i = 0; int ret = 0; @@ -639,7 +637,9 @@ static int dpu_encoder_virt_atomic_check( } } - topology = dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode, crtc_state); + topology = &dpu_enc->topology; + memset(topology, 0, sizeof (*topology)); + dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode, crtc_state, topology); /* * Release and Allocate resources on every modeset @@ -650,7 +650,7 @@ static int dpu_encoder_virt_atomic_check( if (!crtc_state->active_changed || crtc_state->enable) ret = dpu_rm_reserve(&dpu_kms->rm, global_state, - drm_enc, crtc_state, topology); + drm_enc, crtc_state, *topology); } trace_dpu_enc_atomic_check_flags(DRMID(drm_enc), adj_mode->flags);
At current implementation, topology configuration is thrown away after dpu_rm_reserve(). This patch save the topology so that it can be used for DSC related calculation later. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 32 ++++++++++++++--------------- 1 file changed, 16 insertions(+), 16 deletions(-)