diff mbox series

[2/4] arm64: dts: qcom: sm8350: Update the RPMHPD bindings entry

Message ID 1689840545-5094-3-git-send-email-quic_rohiagar@quicinc.com (mailing list archive)
State Accepted
Headers show
Series Use generic RPMHPD bindings for some of the Qualcomm SoCs | expand

Commit Message

Rohit Agarwal July 20, 2023, 8:09 a.m. UTC
Update the RPMHPD bindings entry as per the new generic bindings defined in
rpmhpd.h for SM8350 SoC.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 75 ++++++++++++++++++------------------
 1 file changed, 38 insertions(+), 37 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 88ef478..edc072e 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -15,6 +15,7 @@ 
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/interconnect/qcom,sm8350.h>
@@ -737,7 +738,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_120mhz>;
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
@@ -769,7 +770,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_120mhz>;
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
@@ -801,7 +802,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
@@ -833,7 +834,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
@@ -851,7 +852,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
@@ -869,7 +870,7 @@ 
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart18_default>;
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
@@ -896,7 +897,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
@@ -963,7 +964,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
@@ -995,7 +996,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
@@ -1027,7 +1028,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
@@ -1045,7 +1046,7 @@ 
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart3_default_state>;
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
@@ -1058,7 +1059,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
@@ -1090,7 +1091,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
@@ -1122,7 +1123,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
@@ -1154,7 +1155,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
@@ -1172,7 +1173,7 @@ 
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart6_default>;
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
@@ -1199,7 +1200,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
@@ -1266,7 +1267,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_120mhz>;
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
@@ -1298,7 +1299,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
@@ -1330,7 +1331,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
@@ -1362,7 +1363,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
@@ -1394,7 +1395,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
@@ -1426,7 +1427,7 @@ 
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SM8350_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
@@ -2003,8 +2004,8 @@ 
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd SM8350_CX>,
-					<&rpmhpd SM8350_MSS>;
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
 			power-domain-names = "cx", "mss";
 
 			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
@@ -2044,8 +2045,8 @@ 
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd SM8350_LCX>,
-					<&rpmhpd SM8350_LMX>;
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
 			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&pil_slpi_mem>;
@@ -2114,7 +2115,7 @@ 
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
 			interconnect-names = "sdhc-ddr","cpu-sdhc";
 			iommus = <&apps_smmu 0x4a0 0x0>;
-			power-domains = <&rpmhpd SM8350_CX>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 			bus-width = <4>;
 			dma-coherent;
@@ -2475,7 +2476,7 @@ 
 				assigned-clock-rates = <19200000>;
 
 				operating-points-v2 = <&dpu_opp_table>;
-				power-domains = <&rpmhpd SM8350_MMCX>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <0>;
@@ -2538,7 +2539,7 @@ 
 				#sound-dai-cells = <0>;
 
 				operating-points-v2 = <&dp_opp_table>;
-				power-domains = <&rpmhpd SM8350_MMCX>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
 
 				status = "disabled";
 
@@ -2606,7 +2607,7 @@ 
 							 <&mdss_dsi0_phy 1>;
 
 				operating-points-v2 = <&dsi0_opp_table>;
-				power-domains = <&rpmhpd SM8350_MMCX>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
 
 				phys = <&mdss_dsi0_phy>;
 
@@ -2704,7 +2705,7 @@ 
 							 <&mdss_dsi1_phy 1>;
 
 				operating-points-v2 = <&dsi1_opp_table>;
-				power-domains = <&rpmhpd SM8350_MMCX>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
 
 				phys = <&mdss_dsi1_phy>;
 
@@ -2795,7 +2796,7 @@ 
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
 
-			power-domains = <&rpmhpd SM8350_MMCX>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
 		};
 
 		pdc: interrupt-controller@b220000 {
@@ -3188,8 +3189,8 @@ 
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd SM8350_LCX>,
-					<&rpmhpd SM8350_LMX>;
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
 			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&pil_adsp_mem>;
@@ -3417,8 +3418,8 @@ 
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd SM8350_CX>,
-					<&rpmhpd SM8350_MXC>;
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
 			power-domain-names = "cx", "mxc";
 
 			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;