Message ID | 1713868417-37856-3-git-send-email-quic_qianyu@quicinc.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Add sysfs entry to EDL mode | expand |
On 4/23/2024 4:33 AM, Qiang Yu wrote: > Some controllers may want to know the address of a certain doorbell. Hence > add a new API where we read CHDBOFF register to get the base address of > doorbell, so that the controller can calculate the address of the doorbell > it wants by adding additional offset. > > Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com> > diff --git a/include/linux/mhi.h b/include/linux/mhi.h > index d968e1a..cb3b676 100644 > --- a/include/linux/mhi.h > +++ b/include/linux/mhi.h > @@ -816,4 +816,10 @@ int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir, > */ > bool mhi_queue_is_full(struct mhi_device *mhi_dev, enum dma_data_direction dir); > > +/** > + * mhi_get_channel_doorbell_offset - Get the channel doorbell offset > + * @mhi_cntrl: MHI controller > + * @chdb_offset: Channel doorbell offset > + */ > +int mhi_get_channel_doorbell_offset(struct mhi_controller *mhi_cntrl, u32 *chdb_offset); Should have a blank line here before the #endif just like how the file was before this change > #endif /* _MHI_H_ */ With the above Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
On Tue, Apr 23, 2024 at 06:33:36PM +0800, Qiang Yu wrote: > Some controllers may want to know the address of a certain doorbell. Hence > add a new API where we read CHDBOFF register to get the base address of > doorbell, so that the controller can calculate the address of the doorbell > it wants by adding additional offset. > > Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com> One nitpick below. But I'll fix it. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- > drivers/bus/mhi/host/init.c | 6 ++---- > drivers/bus/mhi/host/main.c | 16 ++++++++++++++++ > include/linux/mhi.h | 6 ++++++ > 3 files changed, 24 insertions(+), 4 deletions(-) > > diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c > index 7104c18..6e0fa79 100644 > --- a/drivers/bus/mhi/host/init.c > +++ b/drivers/bus/mhi/host/init.c > @@ -541,11 +541,9 @@ int mhi_init_mmio(struct mhi_controller *mhi_cntrl) > dev_dbg(dev, "Initializing MHI registers\n"); > > /* Read channel db offset */ > - ret = mhi_read_reg(mhi_cntrl, base, CHDBOFF, &val); > - if (ret) { > - dev_err(dev, "Unable to read CHDBOFF register\n"); > + ret = mhi_get_channel_doorbell_offset(mhi_cntrl, &val); > + if (ret) > return -EIO; return ret; - Mani > - } > > if (val >= mhi_cntrl->reg_len - (8 * MHI_DEV_WAKE_DB)) { > dev_err(dev, "CHDB offset: 0x%x is out of range: 0x%zx\n", > diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c > index 15d657a..4de7567 100644 > --- a/drivers/bus/mhi/host/main.c > +++ b/drivers/bus/mhi/host/main.c > @@ -1691,3 +1691,19 @@ void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev) > } > } > EXPORT_SYMBOL_GPL(mhi_unprepare_from_transfer); > + > +int mhi_get_channel_doorbell_offset(struct mhi_controller *mhi_cntrl, u32 *chdb_offset) > +{ > + struct device *dev = &mhi_cntrl->mhi_dev->dev; > + void __iomem *base = mhi_cntrl->regs; > + int ret; > + > + ret = mhi_read_reg(mhi_cntrl, base, CHDBOFF, chdb_offset); > + if (ret) { > + dev_err(dev, "Unable to read CHDBOFF register\n"); > + return -EIO; > + } > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(mhi_get_channel_doorbell_offset); > diff --git a/include/linux/mhi.h b/include/linux/mhi.h > index d968e1a..cb3b676 100644 > --- a/include/linux/mhi.h > +++ b/include/linux/mhi.h > @@ -816,4 +816,10 @@ int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir, > */ > bool mhi_queue_is_full(struct mhi_device *mhi_dev, enum dma_data_direction dir); > > +/** > + * mhi_get_channel_doorbell_offset - Get the channel doorbell offset > + * @mhi_cntrl: MHI controller > + * @chdb_offset: Channel doorbell offset > + */ > +int mhi_get_channel_doorbell_offset(struct mhi_controller *mhi_cntrl, u32 *chdb_offset); > #endif /* _MHI_H_ */ > -- > 2.7.4 > >
diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c index 7104c18..6e0fa79 100644 --- a/drivers/bus/mhi/host/init.c +++ b/drivers/bus/mhi/host/init.c @@ -541,11 +541,9 @@ int mhi_init_mmio(struct mhi_controller *mhi_cntrl) dev_dbg(dev, "Initializing MHI registers\n"); /* Read channel db offset */ - ret = mhi_read_reg(mhi_cntrl, base, CHDBOFF, &val); - if (ret) { - dev_err(dev, "Unable to read CHDBOFF register\n"); + ret = mhi_get_channel_doorbell_offset(mhi_cntrl, &val); + if (ret) return -EIO; - } if (val >= mhi_cntrl->reg_len - (8 * MHI_DEV_WAKE_DB)) { dev_err(dev, "CHDB offset: 0x%x is out of range: 0x%zx\n", diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c index 15d657a..4de7567 100644 --- a/drivers/bus/mhi/host/main.c +++ b/drivers/bus/mhi/host/main.c @@ -1691,3 +1691,19 @@ void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev) } } EXPORT_SYMBOL_GPL(mhi_unprepare_from_transfer); + +int mhi_get_channel_doorbell_offset(struct mhi_controller *mhi_cntrl, u32 *chdb_offset) +{ + struct device *dev = &mhi_cntrl->mhi_dev->dev; + void __iomem *base = mhi_cntrl->regs; + int ret; + + ret = mhi_read_reg(mhi_cntrl, base, CHDBOFF, chdb_offset); + if (ret) { + dev_err(dev, "Unable to read CHDBOFF register\n"); + return -EIO; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mhi_get_channel_doorbell_offset); diff --git a/include/linux/mhi.h b/include/linux/mhi.h index d968e1a..cb3b676 100644 --- a/include/linux/mhi.h +++ b/include/linux/mhi.h @@ -816,4 +816,10 @@ int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir, */ bool mhi_queue_is_full(struct mhi_device *mhi_dev, enum dma_data_direction dir); +/** + * mhi_get_channel_doorbell_offset - Get the channel doorbell offset + * @mhi_cntrl: MHI controller + * @chdb_offset: Channel doorbell offset + */ +int mhi_get_channel_doorbell_offset(struct mhi_controller *mhi_cntrl, u32 *chdb_offset); #endif /* _MHI_H_ */
Some controllers may want to know the address of a certain doorbell. Hence add a new API where we read CHDBOFF register to get the base address of doorbell, so that the controller can calculate the address of the doorbell it wants by adding additional offset. Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com> --- drivers/bus/mhi/host/init.c | 6 ++---- drivers/bus/mhi/host/main.c | 16 ++++++++++++++++ include/linux/mhi.h | 6 ++++++ 3 files changed, 24 insertions(+), 4 deletions(-)