| Message ID | 20180827103033.6359-2-vkoul@kernel.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Andy Gross |
| Headers | show |
| Series | arm64: dts: Add PON & resin binding | expand |
On Mon 27 Aug 03:30 PDT 2018, Vinod Koul wrote: > Add PON binding and pwrkey as child nodes for PON driver. Also > add additional properties for pwrkey i.e., linux,code > > Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > arch/arm64/boot/dts/qcom/pm8916.dtsi | 18 +++++++++++++----- > 1 file changed, 13 insertions(+), 5 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi > index 196b1c0ceb9b..15a37cbcd216 100644 > --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi > @@ -1,6 +1,7 @@ > // SPDX-License-Identifier: GPL-2.0 > #include <dt-bindings/iio/qcom,spmi-vadc.h> > #include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/input/linux-event-codes.h> > #include <dt-bindings/spmi/spmi.h> > > &spmi_bus { > @@ -18,12 +19,19 @@ > interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; > }; > > - pwrkey@800 { > - compatible = "qcom,pm8941-pwrkey"; > + pon@800 { > + compatible = "qcom,pm8916-pon"; > reg = <0x800>; > - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > - debounce = <15625>; > - bias-pull-up; > + mode-bootloader = <0x2>; > + mode-recovery = <0x1>; > + > + pwrkey { > + compatible = "qcom,pm8941-pwrkey"; > + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + linux,code = <KEY_POWER>; > + }; > }; > > pm8916_gpios: gpios@c000 { > -- > 2.14.4 >
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 196b1c0ceb9b..15a37cbcd216 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { @@ -18,12 +19,19 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pwrkey@800 { - compatible = "qcom,pm8941-pwrkey"; + pon@800 { + compatible = "qcom,pm8916-pon"; reg = <0x800>; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; }; pm8916_gpios: gpios@c000 {
Add PON binding and pwrkey as child nodes for PON driver. Also add additional properties for pwrkey i.e., linux,code Signed-off-by: Vinod Koul <vkoul@kernel.org> --- arch/arm64/boot/dts/qcom/pm8916.dtsi | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)