| Message ID | 20180827103033.6359-3-vkoul@kernel.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Andy Gross |
| Headers | show |
| Series | arm64: dts: Add PON & resin binding | expand |
On Mon 27 Aug 03:30 PDT 2018, Vinod Koul wrote: > Add PON binding and pwrkey as child nodes for PON driver. > > Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > arch/arm64/boot/dts/qcom/pm8994.dtsi | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi > index 80024c0b1c7c..76b5a3e6a2b5 100644 > --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi > @@ -1,6 +1,7 @@ > // SPDX-License-Identifier: GPL-2.0 > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/spmi/spmi.h> > +#include <dt-bindings/input/linux-event-codes.h> > > &spmi_bus { > > @@ -17,6 +18,23 @@ > interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; > }; > > + pon@800 { > + compatible = "qcom,pm8916-pon"; > + > + reg = <0x800>; > + mode-bootloader = <0x2>; > + mode-recovery = <0x1>; > + > + pwrkey { > + compatible = "qcom,pm8941-pwrkey"; > + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + linux,code = <KEY_POWER>; > + }; > + > + }; > + > pm8994_gpios: gpios@c000 { > compatible = "qcom,pm8994-gpio"; > reg = <0xc000>; > -- > 2.14.4 >
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 80024c0b1c7c..76b5a3e6a2b5 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/input/linux-event-codes.h> &spmi_bus { @@ -17,6 +18,23 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; + pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + }; + pm8994_gpios: gpios@c000 { compatible = "qcom,pm8994-gpio"; reg = <0xc000>;
Add PON binding and pwrkey as child nodes for PON driver. Signed-off-by: Vinod Koul <vkoul@kernel.org> --- arch/arm64/boot/dts/qcom/pm8994.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)