diff mbox series

[v2,7/7] arm64: dts: qcom: apq8016-sbc: Standardize LED labels

Message ID 20181029090006.4353-8-manivannan.sadhasivam@linaro.org (mailing list archive)
State New, archived
Headers show
Series Standardize onboard LED support for 96Boards | expand

Commit Message

Manivannan Sadhasivam Oct. 29, 2018, 9 a.m. UTC 
For all 96Boards, the following standard is used for onboard LEDs.

green:user1  default-trigger: heartbeat
green:user2  default-trigger: mmc0/disk-activity(onboard-storage)
green:user3  default-trigger: mmc1 (SD-card)
green:user4  default-trigger: none, panic-indicator
yellow:wlan  default-trigger: phy0tx
blue:bt      default-trigger: hci0-power

So lets adopt the same for APQ8016 SBC (Dragonboard410c), which is
one of the 96Boards CE platform.
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Amit Kucheria Oct. 29, 2018, 9:17 a.m. UTC | #1 
On Mon, Oct 29, 2018 at 2:31 PM Manivannan Sadhasivam
<manivannan.sadhasivam@linaro.org> wrote:
>
> For all 96Boards, the following standard is used for onboard LEDs.
>
> green:user1  default-trigger: heartbeat
> green:user2  default-trigger: mmc0/disk-activity(onboard-storage)
> green:user3  default-trigger: mmc1 (SD-card)
> green:user4  default-trigger: none, panic-indicator
> yellow:wlan  default-trigger: phy0tx
> blue:bt      default-trigger: hci0-power
>
> So lets adopt the same for APQ8016 SBC (Dragonboard410c), which is
> one of the 96Boards CE platform.

You are missing a signed-off here :-)

Acked-by: Amit Kucheria <amit.kucheria@linaro.org>

> ---
>  arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> index 46feedf7c989..35f95154316b 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> @@ -300,28 +300,28 @@
>                         compatible = "gpio-leds";
>
>                         led@1 {
> -                               label = "apq8016-sbc:green:user1";
> +                               label = "green:user1";
>                                 gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
>                                 linux,default-trigger = "heartbeat";
>                                 default-state = "off";
>                         };
>
>                         led@2 {
> -                               label = "apq8016-sbc:green:user2";
> +                               label = "green:user2";
>                                 gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
>                                 linux,default-trigger = "mmc0";
>                                 default-state = "off";
>                         };
>
>                         led@3 {
> -                               label = "apq8016-sbc:green:user3";
> +                               label = "green:user3";
>                                 gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
>                                 linux,default-trigger = "mmc1";
>                                 default-state = "off";
>                         };
>
>                         led@4 {
> -                               label = "apq8016-sbc:green:user4";
> +                               label = "green:user4";
>                                 gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
>                                 linux,default-trigger = "none";
>                                 panic-indicator;
> @@ -329,14 +329,14 @@
>                         };
>
>                         led@5 {
> -                               label = "apq8016-sbc:yellow:wlan";
> +                               label = "yellow:wlan";
>                                 gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
>                                 linux,default-trigger = "phy0tx";
>                                 default-state = "off";
>                         };
>
>                         led@6 {
> -                               label = "apq8016-sbc:blue:bt";
> +                               label = "blue:bt";
>                                 gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
>                                 linux,default-trigger = "bluetooth-power";
>                                 default-state = "off";
> --
> 2.17.1
>
Manivannan Sadhasivam Oct. 29, 2018, 9:32 a.m. UTC | #2 
On Mon, Oct 29, 2018 at 02:47:11PM +0530, Amit Kucheria wrote:
> On Mon, Oct 29, 2018 at 2:31 PM Manivannan Sadhasivam
> <manivannan.sadhasivam@linaro.org> wrote:
> >
> > For all 96Boards, the following standard is used for onboard LEDs.
> >
> > green:user1  default-trigger: heartbeat
> > green:user2  default-trigger: mmc0/disk-activity(onboard-storage)
> > green:user3  default-trigger: mmc1 (SD-card)
> > green:user4  default-trigger: none, panic-indicator
> > yellow:wlan  default-trigger: phy0tx
> > blue:bt      default-trigger: hci0-power
> >
> > So lets adopt the same for APQ8016 SBC (Dragonboard410c), which is
> > one of the 96Boards CE platform.
> 
> You are missing a signed-off here :-)
>

ahh, my bad. Will fix it in next revision.

Thanks,
Mani

> Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
> 
> > ---
> >  arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > index 46feedf7c989..35f95154316b 100644
> > --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > @@ -300,28 +300,28 @@
> >                         compatible = "gpio-leds";
> >
> >                         led@1 {
> > -                               label = "apq8016-sbc:green:user1";
> > +                               label = "green:user1";
> >                                 gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
> >                                 linux,default-trigger = "heartbeat";
> >                                 default-state = "off";
> >                         };
> >
> >                         led@2 {
> > -                               label = "apq8016-sbc:green:user2";
> > +                               label = "green:user2";
> >                                 gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
> >                                 linux,default-trigger = "mmc0";
> >                                 default-state = "off";
> >                         };
> >
> >                         led@3 {
> > -                               label = "apq8016-sbc:green:user3";
> > +                               label = "green:user3";
> >                                 gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
> >                                 linux,default-trigger = "mmc1";
> >                                 default-state = "off";
> >                         };
> >
> >                         led@4 {
> > -                               label = "apq8016-sbc:green:user4";
> > +                               label = "green:user4";
> >                                 gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
> >                                 linux,default-trigger = "none";
> >                                 panic-indicator;
> > @@ -329,14 +329,14 @@
> >                         };
> >
> >                         led@5 {
> > -                               label = "apq8016-sbc:yellow:wlan";
> > +                               label = "yellow:wlan";
> >                                 gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
> >                                 linux,default-trigger = "phy0tx";
> >                                 default-state = "off";
> >                         };
> >
> >                         led@6 {
> > -                               label = "apq8016-sbc:blue:bt";
> > +                               label = "blue:bt";
> >                                 gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
> >                                 linux,default-trigger = "bluetooth-power";
> >                                 default-state = "off";
> > --
> > 2.17.1
> >
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 46feedf7c989..35f95154316b 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -300,28 +300,28 @@ 
 			compatible = "gpio-leds";
 
 			led@1 {
-				label = "apq8016-sbc:green:user1";
+				label = "green:user1";
 				gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "heartbeat";
 				default-state = "off";
 			};
 
 			led@2 {
-				label = "apq8016-sbc:green:user2";
+				label = "green:user2";
 				gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
 
 			led@3 {
-				label = "apq8016-sbc:green:user3";
+				label = "green:user3";
 				gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "mmc1";
 				default-state = "off";
 			};
 
 			led@4 {
-				label = "apq8016-sbc:green:user4";
+				label = "green:user4";
 				gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "none";
 				panic-indicator;
@@ -329,14 +329,14 @@ 
 			};
 
 			led@5 {
-				label = "apq8016-sbc:yellow:wlan";
+				label = "yellow:wlan";
 				gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "phy0tx";
 				default-state = "off";
 			};
 
 			led@6 {
-				label = "apq8016-sbc:blue:bt";
+				label = "blue:bt";
 				gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "bluetooth-power";
 				default-state = "off";