@@ -113,37 +113,6 @@
};
};
- remoteproc_cdsp: remoteproc-cdsp {
- compatible = "qcom,qcs404-cdsp-pas";
-
- interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&xo_board>;
- clock-names = "xo";
-
- memory-region = <&cdsp_fw_mem>;
-
- qcom,smem-states = <&cdsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
-
- qcom,remote-pid = <5>;
- mboxes = <&apcs_glb 12>;
-
- label = "cdsp";
- };
- };
-
remoteproc_wcss: remoteproc-wcss {
compatible = "qcom,qcs404-wcss-pas";
@@ -288,6 +257,57 @@
clock-names = "core";
};
+ remoteproc_cdsp: remoteproc@b00000 {
+ compatible = "qcom,qcs404-cdsp-pas";
+ reg = <0x00b00000 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>,
+ <&gcc GCC_CDSP_CFG_AHB_CLK>,
+ <&gcc GCC_CDSP_TBU_CLK>,
+ <&gcc GCC_BIMC_CDSP_CLK>,
+ <&turingcc TURING_WRAPPER_AON_CLK>,
+ <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
+ <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
+ <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
+ clock-names = "xo",
+ "sway",
+ "tbu",
+ "bimc",
+ "ahb_aon",
+ "q6ss_slave",
+ "q6ss_master",
+ "q6_axim";
+
+ resets = <&gcc GCC_CDSP_RESTART>;
+ reset-names = "restart";
+
+ qcom,halt-regs = <&tcsr 0x19004>;
+
+ memory-region = <&cdsp_fw_mem>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <5>;
+ mboxes = <&apcs_glb 12>;
+
+ label = "cdsp";
+ };
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,qcs404-pinctrl";
reg = <0x01000000 0x200000>,
Add all the properties needed to describe the CDSP for both the Trustzone and non-Trustzone based remoteproc case, allowing any child devices to be described once by just overriding the compatible to match the firmware available on the board. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 82 +++++++++++++++++----------- 1 file changed, 51 insertions(+), 31 deletions(-)