@@ -82,68 +82,6 @@
method = "smc";
};
- remoteproc_adsp: remoteproc-adsp {
- compatible = "qcom,qcs404-adsp-pas";
-
- interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&xo_board>;
- clock-names = "xo";
-
- memory-region = <&adsp_fw_mem>;
-
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
-
- qcom,remote-pid = <2>;
- mboxes = <&apcs_glb 8>;
-
- label = "adsp";
- };
- };
-
- remoteproc_wcss: remoteproc-wcss {
- compatible = "qcom,qcs404-wcss-pas";
-
- interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
- <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&xo_board>;
- clock-names = "xo";
-
- memory-region = <&wlan_fw_mem>;
-
- qcom,smem-states = <&wcss_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
- qcom,remote-pid = <1>;
- mboxes = <&apcs_glb 16>;
-
- label = "wcss";
- };
- };
-
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -458,6 +396,38 @@
#interrupt-cells = <4>;
};
+ remoteproc_wcss: remoteproc@7400000 {
+ compatible = "qcom,qcs404-wcss-pas";
+ reg = <0x07400000 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&wlan_fw_mem>;
+
+ qcom,smem-states = <&wcss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 16>;
+
+ label = "wcss";
+ };
+ };
+
sdcc1: sdcc@7804000 {
compatible = "qcom,sdhci-msm-v5";
reg = <0x07804000 0x1000>, <0x7805000 0x1000>;
@@ -843,6 +813,38 @@
status = "disabled";
};
};
+
+ remoteproc_adsp: remoteproc@c700000 {
+ compatible = "qcom,qcs404-adsp-pas";
+ reg = <0x0c700000 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_fw_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <2>;
+ mboxes = <&apcs_glb 8>;
+
+ label = "adsp";
+ };
+ };
};
timer {
Although we don't describe lpass and wcss with all the details needed to control them in a Trustzone-less environment, move them under soc in order to tidy up the structure and prepare for describing them fully. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 126 ++++++++++++++------------- 1 file changed, 64 insertions(+), 62 deletions(-)