diff mbox series

[v3,4/5] interconnect: qcom: Add interconnect SMD over SMD driver

Message ID 20190611164157.24656-5-georgi.djakov@linaro.org (mailing list archive)
State Superseded, archived
Headers show
Series Add QCS404 interconnect provider driver | expand

Commit Message

Georgi Djakov June 11, 2019, 4:41 p.m. UTC 
On some Qualcomm SoCs, there is a remote processor, which controls some of
the Network-On-Chip interconnect resources. Other CPUs express their needs
by communicating with this processor. Add a driver to handle communication
with this remote processor.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---

v3:
- New patch.

 drivers/interconnect/qcom/Kconfig   |  9 ++++
 drivers/interconnect/qcom/Makefile  |  2 +
 drivers/interconnect/qcom/smd-rpm.c | 72 +++++++++++++++++++++++++++++
 drivers/interconnect/qcom/smd-rpm.h | 15 ++++++
 4 files changed, 98 insertions(+)
 create mode 100644 drivers/interconnect/qcom/smd-rpm.c
 create mode 100644 drivers/interconnect/qcom/smd-rpm.h

Comments

Bjorn Andersson June 11, 2019, 11:31 p.m. UTC | #1 
On Tue 11 Jun 09:41 PDT 2019, Georgi Djakov wrote:

> On some Qualcomm SoCs, there is a remote processor, which controls some of
> the Network-On-Chip interconnect resources. Other CPUs express their needs
> by communicating with this processor. Add a driver to handle communication
> with this remote processor.
> 
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
> 
> v3:
> - New patch.
> 
>  drivers/interconnect/qcom/Kconfig   |  9 ++++
>  drivers/interconnect/qcom/Makefile  |  2 +
>  drivers/interconnect/qcom/smd-rpm.c | 72 +++++++++++++++++++++++++++++
>  drivers/interconnect/qcom/smd-rpm.h | 15 ++++++
>  4 files changed, 98 insertions(+)
>  create mode 100644 drivers/interconnect/qcom/smd-rpm.c
>  create mode 100644 drivers/interconnect/qcom/smd-rpm.h
> 
> diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
> index e76e3e248c41..b0eade1da5d5 100644
> --- a/drivers/interconnect/qcom/Kconfig
> +++ b/drivers/interconnect/qcom/Kconfig
> @@ -9,6 +9,7 @@ config INTERCONNECT_QCOM_QCS404
>  	tristate "Qualcomm QCS404 interconnect driver"
>  	depends on INTERCONNECT_QCOM
>  	depends on QCOM_SMD_RPM || COMPILE_TEST
> +	select INTERCONNECT_QCOM_SMD_RPM
>  	help
>  	  This is a driver for the Qualcomm Network-on-Chip on qcs404-based
>  	  platforms.
> @@ -20,3 +21,11 @@ config INTERCONNECT_QCOM_SDM845
>  	help
>  	  This is a driver for the Qualcomm Network-on-Chip on sdm845-based
>  	  platforms.
> +
> +config INTERCONNECT_QCOM_SMD_RPM
> +	tristate "Qualcomm SMD RPM interconnect driver"

I think it's correct to have INTERCONNECT_QCOM_QCS404 select
INTERCONNECT_QCOM_SMD_RPM and then but INTERCONNECT_QCOM_SMD_RPM should
not be user selectable. So leave the tristate but drop the description
and the help text.

> +	depends on INTERCONNECT_QCOM
> +	depends on QCOM_SMD_RPM || COMPILE_TEST
> +	help
> +	  This is a driver for communicating interconnect related configuration
> +	  details with a remote processor (RPM) on Qualcomm platforms.
> diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
> index 059ff325ee6c..67dafb783dec 100644
> --- a/drivers/interconnect/qcom/Makefile
> +++ b/drivers/interconnect/qcom/Makefile
> @@ -2,6 +2,8 @@
>  
>  qnoc-qcs404-objs			:= qcs404.o
>  qnoc-sdm845-objs			:= sdm845.o
> +icc-smd-rpm-objs			:= smd-rpm.o
>  
>  obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o
>  obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o
> +obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o
> diff --git a/drivers/interconnect/qcom/smd-rpm.c b/drivers/interconnect/qcom/smd-rpm.c
> new file mode 100644
> index 000000000000..af22c0a293e6
> --- /dev/null
> +++ b/drivers/interconnect/qcom/smd-rpm.c
> @@ -0,0 +1,72 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * RPM over SMD communication wrapper for interconnects
> + *
> + * Copyright (C) 2019 Linaro Ltd
> + * Author: Georgi Djakov <georgi.djakov@linaro.org>
> + */
> +
> +#include <linux/interconnect-provider.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/soc/qcom/smd-rpm.h>
> +
> +#include "smd-rpm.h"
> +
> +#define RPM_KEY_BW		0x00007762
> +
> +static struct qcom_smd_rpm *icc_smd_rpm;
> +
> +struct icc_rpm_smd_req {
> +	__le32 key;
> +	__le32 nbytes;
> +	__le32 value;
> +};
> +
> +bool qcom_icc_rpm_smd_available(void)
> +{
> +	if (!icc_smd_rpm)
> +		return false;
> +
> +	return true;
> +}
> +EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_available);
> +
> +int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val)
> +{
> +	struct icc_rpm_smd_req req = {
> +		.key = cpu_to_le32(RPM_KEY_BW),
> +		.nbytes = cpu_to_le32(sizeof(u32)),
> +		.value = cpu_to_le32(val),
> +	};
> +
> +	return qcom_rpm_smd_write(icc_smd_rpm, ctx, rsc_type, id, &req,
> +				  sizeof(req));
> +}
> +EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_send);
> +
> +static int qcom_icc_rpm_smd_probe(struct platform_device *pdev)
> +{
> +	icc_smd_rpm = dev_get_drvdata(pdev->dev.parent);
> +
> +	if (!icc_smd_rpm) {
> +		dev_err(&pdev->dev, "unable to retrieve handle to RPM\n");
> +		return -ENODEV;
> +	}
> +
> +	return 0;
> +}

It would probably be nice to have a remove function that zeros out
icc_smd_rpm as well.

Regards,
Bjorn

> +
> +static struct platform_driver qcom_interconnect_rpm_smd_driver = {
> +	.driver = {
> +		.name		= "icc_smd_rpm",
> +	},
> +	.probe = qcom_icc_rpm_smd_probe,
> +};
> +module_platform_driver(qcom_interconnect_rpm_smd_driver);
> +MODULE_AUTHOR("Georgi Djakov <georgi.djakov@linaro.org>");
> +MODULE_DESCRIPTION("Qualcomm SMD RPM interconnect proxy driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:icc_smd_rpm");
> diff --git a/drivers/interconnect/qcom/smd-rpm.h b/drivers/interconnect/qcom/smd-rpm.h
> new file mode 100644
> index 000000000000..ca9d0327b8ac
> --- /dev/null
> +++ b/drivers/interconnect/qcom/smd-rpm.h
> @@ -0,0 +1,15 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2019, Linaro Ltd.
> + * Author: Georgi Djakov <georgi.djakov@linaro.org>
> + */
> +
> +#ifndef __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
> +#define __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
> +
> +#include <linux/soc/qcom/smd-rpm.h>
> +
> +bool qcom_icc_rpm_smd_available(void);
> +int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val);
> +
> +#endif
diff mbox series

Patch

diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
index e76e3e248c41..b0eade1da5d5 100644
--- a/drivers/interconnect/qcom/Kconfig
+++ b/drivers/interconnect/qcom/Kconfig
@@ -9,6 +9,7 @@  config INTERCONNECT_QCOM_QCS404
 	tristate "Qualcomm QCS404 interconnect driver"
 	depends on INTERCONNECT_QCOM
 	depends on QCOM_SMD_RPM || COMPILE_TEST
+	select INTERCONNECT_QCOM_SMD_RPM
 	help
 	  This is a driver for the Qualcomm Network-on-Chip on qcs404-based
 	  platforms.
@@ -20,3 +21,11 @@  config INTERCONNECT_QCOM_SDM845
 	help
 	  This is a driver for the Qualcomm Network-on-Chip on sdm845-based
 	  platforms.
+
+config INTERCONNECT_QCOM_SMD_RPM
+	tristate "Qualcomm SMD RPM interconnect driver"
+	depends on INTERCONNECT_QCOM
+	depends on QCOM_SMD_RPM || COMPILE_TEST
+	help
+	  This is a driver for communicating interconnect related configuration
+	  details with a remote processor (RPM) on Qualcomm platforms.
diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
index 059ff325ee6c..67dafb783dec 100644
--- a/drivers/interconnect/qcom/Makefile
+++ b/drivers/interconnect/qcom/Makefile
@@ -2,6 +2,8 @@ 
 
 qnoc-qcs404-objs			:= qcs404.o
 qnoc-sdm845-objs			:= sdm845.o
+icc-smd-rpm-objs			:= smd-rpm.o
 
 obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o
 obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o
+obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o
diff --git a/drivers/interconnect/qcom/smd-rpm.c b/drivers/interconnect/qcom/smd-rpm.c
new file mode 100644
index 000000000000..af22c0a293e6
--- /dev/null
+++ b/drivers/interconnect/qcom/smd-rpm.c
@@ -0,0 +1,72 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RPM over SMD communication wrapper for interconnects
+ *
+ * Copyright (C) 2019 Linaro Ltd
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#include <linux/interconnect-provider.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/smd-rpm.h>
+
+#include "smd-rpm.h"
+
+#define RPM_KEY_BW		0x00007762
+
+static struct qcom_smd_rpm *icc_smd_rpm;
+
+struct icc_rpm_smd_req {
+	__le32 key;
+	__le32 nbytes;
+	__le32 value;
+};
+
+bool qcom_icc_rpm_smd_available(void)
+{
+	if (!icc_smd_rpm)
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_available);
+
+int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val)
+{
+	struct icc_rpm_smd_req req = {
+		.key = cpu_to_le32(RPM_KEY_BW),
+		.nbytes = cpu_to_le32(sizeof(u32)),
+		.value = cpu_to_le32(val),
+	};
+
+	return qcom_rpm_smd_write(icc_smd_rpm, ctx, rsc_type, id, &req,
+				  sizeof(req));
+}
+EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_send);
+
+static int qcom_icc_rpm_smd_probe(struct platform_device *pdev)
+{
+	icc_smd_rpm = dev_get_drvdata(pdev->dev.parent);
+
+	if (!icc_smd_rpm) {
+		dev_err(&pdev->dev, "unable to retrieve handle to RPM\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static struct platform_driver qcom_interconnect_rpm_smd_driver = {
+	.driver = {
+		.name		= "icc_smd_rpm",
+	},
+	.probe = qcom_icc_rpm_smd_probe,
+};
+module_platform_driver(qcom_interconnect_rpm_smd_driver);
+MODULE_AUTHOR("Georgi Djakov <georgi.djakov@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm SMD RPM interconnect proxy driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:icc_smd_rpm");
diff --git a/drivers/interconnect/qcom/smd-rpm.h b/drivers/interconnect/qcom/smd-rpm.h
new file mode 100644
index 000000000000..ca9d0327b8ac
--- /dev/null
+++ b/drivers/interconnect/qcom/smd-rpm.h
@@ -0,0 +1,15 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019, Linaro Ltd.
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
+#define __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
+
+#include <linux/soc/qcom/smd-rpm.h>
+
+bool qcom_icc_rpm_smd_available(void);
+int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val);
+
+#endif