From patchwork Mon Jun 17 18:37:29 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jeffrey Hugo X-Patchwork-Id: 11000085 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id D49B014DB for ; Mon, 17 Jun 2019 18:37:38 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id C8C8F286F6 for ; Mon, 17 Jun 2019 18:37:38 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id BC7EF289B9; Mon, 17 Jun 2019 18:37:38 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.0 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,FREEMAIL_FROM,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id E66CD286F6 for ; Mon, 17 Jun 2019 18:37:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726996AbfFQShe (ORCPT ); Mon, 17 Jun 2019 14:37:34 -0400 Received: from mail-pl1-f193.google.com ([209.85.214.193]:46854 "EHLO mail-pl1-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725844AbfFQShd (ORCPT ); Mon, 17 Jun 2019 14:37:33 -0400 Received: by mail-pl1-f193.google.com with SMTP id e5so4434885pls.13; Mon, 17 Jun 2019 11:37:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=CQof8F1xhz+F1ATPwPiy1QiO7IM8neuAEGxxMl2Ks3I=; b=N7SCY0+ii8ywOexLGjFWPsUZEEOH07JrYLRyl8BlrHMhazFuB3fBYseJLWgO10BdIb R5rJ1g/NUsmcY+BU8s7d6pp9eeyu6nxjhg5pG3safyTQSMzkzI4WPxjHchYwlehKxP1/ Ym1adYlbQCFXvnpVTUm/gCgzZo/ekucMyn/3avpVv2EsQaRjdqHc53U0+vSTs02Yp+rN XIt9uSH8nS9UNgVZCetJlLl2kjIrER0oSMgFfZhvi/YKdQoIjtWgYyV4mwaC8IE9S+Hg DmEMlGf5zA6Xv9+QYep4UXR4fsbBmrxDCdhtvl41aCMZaLoHwMXBOZ1zJ3JAtMw2vZ1A K1nw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=CQof8F1xhz+F1ATPwPiy1QiO7IM8neuAEGxxMl2Ks3I=; b=irqBta9TXuT9RTUNOF+1j9pz1cnw5md0kunV3hkR+QAhm++h6Fcwsp/X66a6i9CwZj DZmk/ygoVg/WMgs3QPT++5P2qNl0/tZ5IwzxTYmt64mIJmvjEaj4yQ3L9Q9WhPQUGFnV CZlFEBkSRwuGDx+UjRxrHXHkEozJ7SQIz7G1VngysPhvGSgWZ/ZcYzV6tkHzLfhJDsIh U5pWzD0WoQIkrhCxEk2OTBcTNI3CQjzUsRHEF0ST+9Qn+i9fE/jDQQ9UaX5KXVH2KhKW J7KsiZLihiwPmbeWjEsdlFkThCj5uBZecDEvnGyH53PjZ2Lf+/v/QsYR+HkRJzj9ko0U Ip8A== X-Gm-Message-State: APjAAAXyA0ph28LLvC0hXUBI9WN5DJHc3ypAkZ0KavBn4uPLwTYUNI2W tfSTFn/Zc6wY1iHZV2O1jQM= X-Google-Smtp-Source: APXvYqzMuqM00Zl2BNEGoD43HtrkPlEl1i1cpW+s4a3j4ZAkM12xIUhFYLXQ0yELF7J172COS8NgSQ== X-Received: by 2002:a17:902:403:: with SMTP id 3mr107568509ple.66.1560796652839; Mon, 17 Jun 2019 11:37:32 -0700 (PDT) Received: from aw-bldr-10.qualcomm.com (i-global254.qualcomm.com. [199.106.103.254]) by smtp.gmail.com with ESMTPSA id v4sm15417273pff.45.2019.06.17.11.37.31 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Mon, 17 Jun 2019 11:37:32 -0700 (PDT) From: Jeffrey Hugo To: lgirdwood@gmail.com, broonie@kernel.org Cc: agross@kernel.org, bjorn.andersson@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Jeffrey Hugo Subject: [PATCH v5 2/5] regulator: qcom_spmi: Add support for PM8005 Date: Mon, 17 Jun 2019 11:37:29 -0700 Message-Id: <20190617183729.13553-1-jeffrey.l.hugo@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190617183643.13449-1-jeffrey.l.hugo@gmail.com> References: <20190617183643.13449-1-jeffrey.l.hugo@gmail.com> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The PM8005 is used on the msm8998 MTP. The S1 regulator is VDD_GFX, ie it needs to be on and controlled inorder to use the GPU. Add support to drive the PM8005 regulators so that we can bring up the GPU on msm8998. Signed-off-by: Jeffrey Hugo Reviewed-by: Bjorn Andersson --- drivers/regulator/qcom_spmi-regulator.c | 176 ++++++++++++++++++++++++ 1 file changed, 176 insertions(+) diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c index 1b3383a24c9d..8d1ee72ddbe2 100644 --- a/drivers/regulator/qcom_spmi-regulator.c +++ b/drivers/regulator/qcom_spmi-regulator.c @@ -104,6 +104,7 @@ enum spmi_regulator_logical_type { SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS, SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS, SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO, + SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426, }; enum spmi_regulator_type { @@ -150,6 +151,7 @@ enum spmi_regulator_subtype { SPMI_REGULATOR_SUBTYPE_5V_BOOST = 0x01, SPMI_REGULATOR_SUBTYPE_FTS_CTL = 0x08, SPMI_REGULATOR_SUBTYPE_FTS2p5_CTL = 0x09, + SPMI_REGULATOR_SUBTYPE_FTS426_CTL = 0x0a, SPMI_REGULATOR_SUBTYPE_BB_2A = 0x01, SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL1 = 0x0d, SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL2 = 0x0e, @@ -170,6 +172,18 @@ enum spmi_common_regulator_registers { SPMI_COMMON_REG_STEP_CTRL = 0x61, }; +/* + * Second common register layout used by newer devices starting with ftsmps426 + * Note that some of the registers from the first common layout remain + * unchanged and their definition is not duplicated. + */ +enum spmi_ftsmps426_regulator_registers { + SPMI_FTSMPS426_REG_VOLTAGE_LSB = 0x40, + SPMI_FTSMPS426_REG_VOLTAGE_MSB = 0x41, + SPMI_FTSMPS426_REG_VOLTAGE_ULS_LSB = 0x68, + SPMI_FTSMPS426_REG_VOLTAGE_ULS_MSB = 0x69, +}; + enum spmi_vs_registers { SPMI_VS_REG_OCP = 0x4a, SPMI_VS_REG_SOFT_START = 0x4c, @@ -229,6 +243,14 @@ enum spmi_common_control_register_index { #define SPMI_COMMON_MODE_FOLLOW_HW_EN0_MASK 0x01 #define SPMI_COMMON_MODE_FOLLOW_ALL_MASK 0x1f +#define SPMI_FTSMPS426_MODE_BYPASS_MASK 3 +#define SPMI_FTSMPS426_MODE_RETENTION_MASK 4 +#define SPMI_FTSMPS426_MODE_LPM_MASK 5 +#define SPMI_FTSMPS426_MODE_AUTO_MASK 6 +#define SPMI_FTSMPS426_MODE_HPM_MASK 7 + +#define SPMI_FTSMPS426_MODE_MASK 0x07 + /* Common regulator pull down control register layout */ #define SPMI_COMMON_PULL_DOWN_ENABLE_MASK 0x80 @@ -274,6 +296,23 @@ enum spmi_common_control_register_index { #define SPMI_FTSMPS_STEP_MARGIN_NUM 4 #define SPMI_FTSMPS_STEP_MARGIN_DEN 5 +#define SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK 0x03 +#define SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT 0 + +/* Clock rate in kHz of the FTSMPS426 regulator reference clock. */ +#define SPMI_FTSMPS426_CLOCK_RATE 4800 + +/* Minimum voltage stepper delay for each step. */ +#define SPMI_FTSMPS426_STEP_DELAY 2 + +/* + * The ratio SPMI_FTSMPS426_STEP_MARGIN_NUM/SPMI_FTSMPS426_STEP_MARGIN_DEN is + * used to adjust the step rate in order to account for oscillator variance. + */ +#define SPMI_FTSMPS426_STEP_MARGIN_NUM 10 +#define SPMI_FTSMPS426_STEP_MARGIN_DEN 11 + + /* VSET value to decide the range of ULT SMPS */ #define ULT_SMPS_RANGE_SPLIT 0x60 @@ -447,6 +486,10 @@ static struct spmi_voltage_range ftsmps2p5_ranges[] = { SPMI_VOLTAGE_RANGE(1, 160000, 1360000, 2200000, 2200000, 10000), }; +static struct spmi_voltage_range ftsmps426_ranges[] = { + SPMI_VOLTAGE_RANGE(0, 0, 320000, 1352000, 1352000, 4000), +}; + static struct spmi_voltage_range boost_ranges[] = { SPMI_VOLTAGE_RANGE(0, 4000000, 4000000, 5550000, 5550000, 50000), }; @@ -480,6 +523,7 @@ static DEFINE_SPMI_SET_POINTS(ln_ldo); static DEFINE_SPMI_SET_POINTS(smps); static DEFINE_SPMI_SET_POINTS(ftsmps); static DEFINE_SPMI_SET_POINTS(ftsmps2p5); +static DEFINE_SPMI_SET_POINTS(ftsmps426); static DEFINE_SPMI_SET_POINTS(boost); static DEFINE_SPMI_SET_POINTS(boost_byp); static DEFINE_SPMI_SET_POINTS(ult_lo_smps); @@ -747,6 +791,23 @@ spmi_regulator_common_set_voltage(struct regulator_dev *rdev, unsigned selector) return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, buf, 2); } +static int spmi_regulator_common_list_voltage(struct regulator_dev *rdev, + unsigned selector); + +static int spmi_regulator_ftsmps426_set_voltage(struct regulator_dev *rdev, + unsigned selector) +{ + struct spmi_regulator *vreg = rdev_get_drvdata(rdev); + u8 buf[2]; + int mV; + + mV = spmi_regulator_common_list_voltage(rdev, selector) / 1000; + + buf[0] = mV & 0xff; + buf[1] = mV >> 8; + return spmi_vreg_write(vreg, SPMI_FTSMPS426_REG_VOLTAGE_LSB, buf, 2); +} + static int spmi_regulator_set_voltage_time_sel(struct regulator_dev *rdev, unsigned int old_selector, unsigned int new_selector) { @@ -778,6 +839,21 @@ static int spmi_regulator_common_get_voltage(struct regulator_dev *rdev) return spmi_hw_selector_to_sw(vreg, voltage_sel, range); } +static int spmi_regulator_ftsmps426_get_voltage(struct regulator_dev *rdev) +{ + struct spmi_regulator *vreg = rdev_get_drvdata(rdev); + const struct spmi_voltage_range *range; + u8 buf[2]; + int uV; + + spmi_vreg_read(vreg, SPMI_FTSMPS426_REG_VOLTAGE_LSB, buf, 2); + + uV = (((unsigned int)buf[1] << 8) | (unsigned int)buf[0]) * 1000; + range = vreg->set_points->range; + + return (uV - range->set_point_min_uV) / range->step_uV; +} + static int spmi_regulator_single_map_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { @@ -923,6 +999,23 @@ static unsigned int spmi_regulator_common_get_mode(struct regulator_dev *rdev) } } +static unsigned int spmi_regulator_ftsmps426_get_mode(struct regulator_dev *rdev) +{ + struct spmi_regulator *vreg = rdev_get_drvdata(rdev); + u8 reg; + + spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, ®, 1); + + switch (reg) { + case SPMI_FTSMPS426_MODE_HPM_MASK: + return REGULATOR_MODE_NORMAL; + case SPMI_FTSMPS426_MODE_AUTO_MASK: + return REGULATOR_MODE_FAST; + default: + return REGULATOR_MODE_IDLE; + } +} + static int spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode) { @@ -945,6 +1038,30 @@ spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode) return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask); } +static int +spmi_regulator_ftsmps426_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct spmi_regulator *vreg = rdev_get_drvdata(rdev); + u8 mask = SPMI_FTSMPS426_MODE_MASK; + u8 val; + + switch (mode) { + case REGULATOR_MODE_NORMAL: + val = SPMI_FTSMPS426_MODE_HPM_MASK; + break; + case REGULATOR_MODE_FAST: + val = SPMI_FTSMPS426_MODE_AUTO_MASK; + break; + case REGULATOR_MODE_IDLE: + val = SPMI_FTSMPS426_MODE_LPM_MASK; + break; + default: + return -EINVAL; + } + + return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask); +} + static int spmi_regulator_common_set_load(struct regulator_dev *rdev, int load_uA) { @@ -1274,6 +1391,21 @@ static struct regulator_ops spmi_ult_ldo_ops = { .set_soft_start = spmi_regulator_common_set_soft_start, }; +static struct regulator_ops spmi_ftsmps426_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = spmi_regulator_ftsmps426_set_voltage, + .set_voltage_time_sel = spmi_regulator_set_voltage_time_sel, + .get_voltage_sel = spmi_regulator_ftsmps426_get_voltage, + .map_voltage = spmi_regulator_single_map_voltage, + .list_voltage = spmi_regulator_common_list_voltage, + .set_mode = spmi_regulator_ftsmps426_set_mode, + .get_mode = spmi_regulator_ftsmps426_get_mode, + .set_load = spmi_regulator_common_set_load, + .set_pull_down = spmi_regulator_common_set_pull_down, +}; + /* Maximum possible digital major revision value */ #define INF 0xFF @@ -1309,6 +1441,7 @@ static const struct spmi_regulator_mapping supported_regulators[] = { SPMI_VREG(BOOST, 5V_BOOST, 0, INF, BOOST, boost, boost, 0), SPMI_VREG(FTS, FTS_CTL, 0, INF, FTSMPS, ftsmps, ftsmps, 100000), SPMI_VREG(FTS, FTS2p5_CTL, 0, INF, FTSMPS, ftsmps, ftsmps2p5, 100000), + SPMI_VREG(FTS, FTS426_CTL, 0, INF, FTSMPS426, ftsmps426, ftsmps426, 100000), SPMI_VREG(BOOST_BYP, BB_2A, 0, INF, BOOST_BYP, boost, boost_byp, 0), SPMI_VREG(ULT_BUCK, ULT_HF_CTL1, 0, INF, ULT_LO_SMPS, ult_lo_smps, ult_lo_smps, 100000), @@ -1446,6 +1579,34 @@ static int spmi_regulator_init_slew_rate(struct spmi_regulator *vreg) return ret; } +static int spmi_regulator_init_slew_rate_ftsmps426(struct spmi_regulator *vreg) +{ + int ret; + u8 reg = 0; + int delay, slew_rate; + const struct spmi_voltage_range *range = &vreg->set_points->range[0]; + + ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_STEP_CTRL, ®, 1); + if (ret) { + dev_err(vreg->dev, "spmi read failed, ret=%d\n", ret); + return ret; + } + + delay = reg & SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK; + delay >>= SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT; + + /* slew_rate has units of uV/us */ + slew_rate = SPMI_FTSMPS426_CLOCK_RATE * range->step_uV; + slew_rate /= 1000 * (SPMI_FTSMPS426_STEP_DELAY << delay); + slew_rate *= SPMI_FTSMPS426_STEP_MARGIN_NUM; + slew_rate /= SPMI_FTSMPS426_STEP_MARGIN_DEN; + + /* Ensure that the slew rate is greater than 0 */ + vreg->slew_rate = max(slew_rate, 1); + + return ret; +} + static int spmi_regulator_init_registers(struct spmi_regulator *vreg, const struct spmi_regulator_init_data *data) { @@ -1585,6 +1746,12 @@ static int spmi_regulator_of_parse(struct device_node *node, ret = spmi_regulator_init_slew_rate(vreg); if (ret) return ret; + break; + case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426: + ret = spmi_regulator_init_slew_rate_ftsmps426(vreg); + if (ret) + return ret; + break; default: break; } @@ -1741,7 +1908,16 @@ static const struct spmi_regulator_data pmi8994_regulators[] = { { } }; +static const struct spmi_regulator_data pm8005_regulators[] = { + { "s1", 0x1400, "vdd_s1", }, + { "s2", 0x1700, "vdd_s2", }, + { "s3", 0x1a00, "vdd_s3", }, + { "s4", 0x1d00, "vdd_s4", }, + { } +}; + static const struct of_device_id qcom_spmi_regulator_match[] = { + { .compatible = "qcom,pm8005-regulators", .data = &pm8005_regulators }, { .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators }, { .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators }, { .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },