diff mbox series

[v8,4/5] arm64: dts: qcom: Add HP Envy x2

Message ID 20190621145721.38793-1-jeffrey.l.hugo@gmail.com (mailing list archive)
State Accepted, archived
Delegated to: Andy Gross
Headers show
Series Basic DT support for Lenovo Miix 630 | expand

Commit Message

Jeffrey Hugo June 21, 2019, 2:57 p.m. UTC 
This adds the initial DT for the HP Envy x2 laptop.  Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 .../boot/dts/qcom/msm8998-hp-envy-x2.dts      | 30 +++++++++++++++++++
 2 files changed, 31 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index c3e4307bcbd4..76436f33a013 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -6,6 +6,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
new file mode 100644
index 000000000000..24073127091f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
@@ -0,0 +1,30 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-clamshell.dtsi"
+
+/ {
+	model = "HP Envy x2";
+	compatible = "hp,envy-x2", "qcom,msm8998";
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		interrupt-parent = <&tlmm>;
+		interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x3a>;
+		hid-descr-addr = <0x0001>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchpad>;
+	};
+};
+
+&sdhc2 {
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
+};