| Message ID | 20190814125012.8700-8-vkoul@kernel.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: sm8150: Add SM8150 DTS | expand |
Quoting Vinod Koul (2019-08-14 05:49:57) > PM8150 PMIC contains pon and rtc devices so add nodes for these. > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- Squash this with the other patch? > @@ -12,6 +13,25 @@ > #address-cells = <1>; > #size-cells = <0>; > > + pon: pon@800 { > + compatible = "qcom,pm8916-pon"; > + reg = <0x0800>; > + pwrkey { > + compatible = "qcom,pm8941-pwrkey"; > + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + linux,code = <KEY_POWER>; status = "disabled"? > + }; > + }; > + > + rtc@6000 { > + compatible = "qcom,pm8941-rtc"; > + reg = <0x6000>; > + reg-names = "rtc", "alarm"; > + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; status = "disabled"? > + }; > + > pm8150_gpios: gpio@c000 { > compatible = "qcom,pm8150-gpio"; > reg = <0xc000>; > -- > 2.20.1 >
On 14-08-19, 10:03, Stephen Boyd wrote: > Quoting Vinod Koul (2019-08-14 05:49:57) > > PM8150 PMIC contains pon and rtc devices so add nodes for these. > > > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > > --- > > Squash this with the other patch? OK > > > @@ -12,6 +13,25 @@ > > #address-cells = <1>; > > #size-cells = <0>; > > > > + pon: pon@800 { > > + compatible = "qcom,pm8916-pon"; > > + reg = <0x0800>; > > + pwrkey { > > + compatible = "qcom,pm8941-pwrkey"; > > + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > > + debounce = <15625>; > > + bias-pull-up; > > + linux,code = <KEY_POWER>; > > status = "disabled"? will do > > > + }; > > + }; > > + > > + rtc@6000 { > > + compatible = "qcom,pm8941-rtc"; > > + reg = <0x6000>; > > + reg-names = "rtc", "alarm"; > > + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; > > status = "disabled"? will do
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index b533e254a203..2cb727ce30eb 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -2,6 +2,7 @@ // Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. // Copyright (c) 2019, Linaro Limited +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> @@ -12,6 +13,25 @@ #address-cells = <1>; #size-cells = <0>; + pon: pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + }; + pm8150_gpios: gpio@c000 { compatible = "qcom,pm8150-gpio"; reg = <0xc000>;
PM8150 PMIC contains pon and rtc devices so add nodes for these. Signed-off-by: Vinod Koul <vkoul@kernel.org> --- arch/arm64/boot/dts/qcom/pm8150.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)