diff mbox series

[v3,06/14] dt-bindings: cpufreq: qcom-nvmem: Support pstates provided by a power domain

Message ID 20190819100957.17095-1-niklas.cassel@linaro.org (mailing list archive)
State New, archived
Headers show
Series None | expand

Commit Message

Niklas Cassel Aug. 19, 2019, 10:09 a.m. UTC 
Some Qualcomm SoCs have support for Core Power Reduction (CPR).
On these platforms, we need to attach to the power domain provider
providing the performance states, so that the leaky device (the CPU)
can configure the performance states (which represent different
CPU clock frequencies).

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since V2:
-Picked up Rob's Reviewed-by on V2.
-As Rob pointed out in V1, it should be
"In 'cpu' nodes" and not "In 'cpus' nodes".
-In Example 2: include the qcom,opp-fuse-level property rather than "...",
since Rob pointed out in the review of V1 of "dt-bindings: opp: Add
 qcom-opp bindings with properties needed for CPR", that this property was
missing in this patch.

 .../bindings/opp/qcom-nvmem-cpufreq.txt       | 113 +++++++++++++++++-
 1 file changed, 112 insertions(+), 1 deletion(-)

Comments

Stephen Boyd Aug. 19, 2019, 5:59 p.m. UTC | #1 
Quoting Niklas Cassel (2019-08-19 03:09:57)
> +
> +soc {
> +....
> +       cprpd: cpr@b018000 {

Maybe node name should be 'avs' for the industry standard adaptive
voltage scaling acronym?


> +               compatible = "qcom,qcs404-cpr", "qcom,cpr";
> +               reg = <0x0b018000 0x1000>;
> +               ....
> +               vdd-apc-supply = <&pms405_s3>;
> +               #power-domain-cells = <0>;
Niklas Cassel Aug. 22, 2019, 10:27 a.m. UTC | #2 
On Mon, Aug 19, 2019 at 10:59:36AM -0700, Stephen Boyd wrote:
> Quoting Niklas Cassel (2019-08-19 03:09:57)
> > +
> > +soc {
> > +....
> > +       cprpd: cpr@b018000 {
> 
> Maybe node name should be 'avs' for the industry standard adaptive
> voltage scaling acronym?

I see where this is coming from, but "git grep avs" gives a single result.

Also, since the label is cprpd, it doesn't make sense to simply rename the
node name, and I don't think that avspd would be a good name, since it is
less correct.

So if you don't insist, I would prefer to leave it as it is.

> 
> 
> > +               compatible = "qcom,qcs404-cpr", "qcom,cpr";
> > +               reg = <0x0b018000 0x1000>;
> > +               ....
> > +               vdd-apc-supply = <&pms405_s3>;
> > +               #power-domain-cells = <0>;
Stephen Boyd Aug. 28, 2019, 5:52 p.m. UTC | #3 
Quoting Niklas Cassel (2019-08-22 03:27:23)
> On Mon, Aug 19, 2019 at 10:59:36AM -0700, Stephen Boyd wrote:
> > Quoting Niklas Cassel (2019-08-19 03:09:57)
> > > +
> > > +soc {
> > > +....
> > > +       cprpd: cpr@b018000 {
> > 
> > Maybe node name should be 'avs' for the industry standard adaptive
> > voltage scaling acronym?
> 
> I see where this is coming from, but "git grep avs" gives a single result.
> 
> Also, since the label is cprpd, it doesn't make sense to simply rename the
> node name, and I don't think that avspd would be a good name, since it is
> less correct.
> 
> So if you don't insist, I would prefer to leave it as it is.
> 

How about 'power-controller'?
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
index c5ea8b90e35d..1e6261570f3e 100644
--- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
@@ -14,7 +14,7 @@  operating-points-v2 table when it is parsed by the OPP framework.
 
 Required properties:
 --------------------
-In 'cpus' nodes:
+In 'cpu' nodes:
 - operating-points-v2: Phandle to the operating-points-v2 table to use.
 
 In 'operating-points-v2' table:
@@ -23,6 +23,15 @@  In 'operating-points-v2' table:
 
 Optional properties:
 --------------------
+In 'cpu' nodes:
+- power-domains: A phandle pointing to the PM domain specifier which provides
+		the performance states available for active state management.
+		Please refer to the power-domains bindings
+		Documentation/devicetree/bindings/power/power_domain.txt
+		and also examples below.
+- power-domain-names: Should be
+	- 'cpr' for qcs404.
+
 In 'operating-points-v2' table:
 - nvmem-cells: A phandle pointing to a nvmem-cells node representing the
 		efuse registers that has information about the
@@ -682,3 +691,105 @@  soc {
 		};
 	};
 };
+
+Example 2:
+---------
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cprpd>;
+			power-domain-names = "cpr";
+		};
+
+		CPU1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cprpd>;
+			power-domain-names = "cpr";
+		};
+
+		CPU2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cprpd>;
+			power-domain-names = "cpr";
+		};
+
+		CPU3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cprpd>;
+			power-domain-names = "cpr";
+		};
+	};
+
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2-kryo-cpu";
+		opp-shared;
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&cpr_opp1>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			required-opps = <&cpr_opp2>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			required-opps = <&cpr_opp3>;
+		};
+	};
+
+	cpr_opp_table: cpr-opp-table {
+		compatible = "operating-points-v2-qcom-level";
+
+		cpr_opp1: opp1 {
+			opp-level = <1>;
+			qcom,opp-fuse-level = <1>;
+		};
+		cpr_opp2: opp2 {
+			opp-level = <2>;
+			qcom,opp-fuse-level = <2>;
+		};
+		cpr_opp3: opp3 {
+			opp-level = <3>;
+			qcom,opp-fuse-level = <3>;
+		};
+	};
+
+....
+
+soc {
+....
+	cprpd: cpr@b018000 {
+		compatible = "qcom,qcs404-cpr", "qcom,cpr";
+		reg = <0x0b018000 0x1000>;
+		....
+		vdd-apc-supply = <&pms405_s3>;
+		#power-domain-cells = <0>;
+		operating-points-v2 = <&cpr_opp_table>;
+		....
+	};
+};