| Message ID | 20191001085707.8424-2-kholk11@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add TSENS support for MSM8956/76 | expand |
On Tue, Oct 1, 2019 at 2:27 PM <kholk11@gmail.com> wrote: > > From: AngeloGioacchino Del Regno <kholk11@gmail.com> > > Add support for reading calibrated value from thermistors in > MSM8956, MSM8976 and their APQ variants. > > Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> > --- > drivers/thermal/qcom/tsens-v1.c | 167 +++++++++++++++++++++++++++++++- > drivers/thermal/qcom/tsens.c | 3 + > drivers/thermal/qcom/tsens.h | 2 +- > 3 files changed, 170 insertions(+), 2 deletions(-) > > diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c > index 10b595d4f619..04af13085eb5 100644 > --- a/drivers/thermal/qcom/tsens-v1.c > +++ b/drivers/thermal/qcom/tsens-v1.c > @@ -18,6 +18,68 @@ > #define TM_Sn_STATUS_OFF 0x0044 > #define TM_TRDY_OFF 0x0084 > > +/* eeprom layout data for msm8956/76 (v1) */ > +#define MSM8976_BASE0_MASK 0xff > +#define MSM8976_BASE1_MASK 0xff > +#define MSM8976_BASE1_SHIFT 8 > + > +#define MSM8976_S0_P1_MASK 0x3f00 > +#define MSM8976_S1_P1_MASK 0x3f00000 > +#define MSM8976_S2_P1_MASK 0x3f > +#define MSM8976_S3_P1_MASK 0x3f000 > +#define MSM8976_S4_P1_MASK 0x3f00 > +#define MSM8976_S5_P1_MASK 0x3f00000 > +#define MSM8976_S6_P1_MASK 0x3f > +#define MSM8976_S7_P1_MASK 0x3f000 > +#define MSM8976_S8_P1_MASK 0x1f8 > +#define MSM8976_S9_P1_MASK 0x1f8000 > +#define MSM8976_S10_P1_MASK 0xf8000000 > +#define MSM8976_S10_P1_MASK_1 0x1 > + > +#define MSM8976_S0_P2_MASK 0xfc000 > +#define MSM8976_S1_P2_MASK 0xfc000000 > +#define MSM8976_S2_P2_MASK 0xfc0 > +#define MSM8976_S3_P2_MASK 0xfc0000 > +#define MSM8976_S4_P2_MASK 0xfc000 > +#define MSM8976_S5_P2_MASK 0xfc000000 > +#define MSM8976_S6_P2_MASK 0xfc0 > +#define MSM8976_S7_P2_MASK 0xfc0000 > +#define MSM8976_S8_P2_MASK 0x7e00 > +#define MSM8976_S9_P2_MASK 0x7e00000 > +#define MSM8976_S10_P2_MASK 0x7e > + > +#define MSM8976_S0_P1_SHIFT 8 > +#define MSM8976_S1_P1_SHIFT 20 > +#define MSM8976_S2_P1_SHIFT 0 > +#define MSM8976_S3_P1_SHIFT 12 > +#define MSM8976_S4_P1_SHIFT 8 > +#define MSM8976_S5_P1_SHIFT 20 > +#define MSM8976_S6_P1_SHIFT 0 > +#define MSM8976_S7_P1_SHIFT 12 > +#define MSM8976_S8_P1_SHIFT 3 > +#define MSM8976_S9_P1_SHIFT 15 > +#define MSM8976_S10_P1_SHIFT 27 > +#define MSM8976_S10_P1_SHIFT_1 0 > + > +#define MSM8976_S0_P2_SHIFT 14 > +#define MSM8976_S1_P2_SHIFT 26 > +#define MSM8976_S2_P2_SHIFT 6 > +#define MSM8976_S3_P2_SHIFT 18 > +#define MSM8976_S4_P2_SHIFT 14 > +#define MSM8976_S5_P2_SHIFT 26 > +#define MSM8976_S6_P2_SHIFT 6 > +#define MSM8976_S7_P2_SHIFT 18 > +#define MSM8976_S8_P2_SHIFT 9 > +#define MSM8976_S9_P2_SHIFT 21 > +#define MSM8976_S10_P2_SHIFT 1 > + > +#define MSM8976_CAL_SEL_MASK 0x3 > + > +#define MSM8976_CAL_DEGC_PT1 30 > +#define MSM8976_CAL_DEGC_PT2 120 > +#define MSM8976_SLOPE_FACTOR 1000 > +#define MSM8976_SLOPE_DEFAULT 3200 > + > /* eeprom layout data for qcs404/405 (v1) */ > #define BASE0_MASK 0x000007f8 > #define BASE1_MASK 0x0007f800 > @@ -77,6 +139,30 @@ > #define CAL_SEL_MASK 7 > #define CAL_SEL_SHIFT 0 > > +static void compute_intercept_slope_8976(struct tsens_priv *priv, > + u32 *p1, u32 *p2, u32 mode) > +{ > + int i; > + > + priv->sensor[0].slope = 3313; > + priv->sensor[1].slope = 3275; > + priv->sensor[2].slope = 3320; > + priv->sensor[3].slope = 3246; > + priv->sensor[4].slope = 3279; > + priv->sensor[5].slope = 3257; > + priv->sensor[6].slope = 3234; > + priv->sensor[7].slope = 3269; > + priv->sensor[8].slope = 3255; > + priv->sensor[9].slope = 3239; > + priv->sensor[10].slope = 3286; > + > + for (i = 0; i < priv->num_sensors; i++) { > + priv->sensor[i].offset = (p1[i] * MSM8976_SLOPE_FACTOR) - > + (MSM8976_CAL_DEGC_PT1 * > + priv->sensor[i].slope); > + } > +} > + > static int calibrate_v1(struct tsens_priv *priv) > { > u32 base0 = 0, base1 = 0; > @@ -142,7 +228,71 @@ static int calibrate_v1(struct tsens_priv *priv) > return 0; > } > > -/* v1.x: qcs404,405 */ > +static int calibrate_8976(struct tsens_priv *priv) > +{ > + int base0 = 0, base1 = 0, i; > + u32 p1[11], p2[11]; > + int mode = 0, tmp = 0; > + u32 *qfprom_cdata; > + > + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); > + if (IS_ERR(qfprom_cdata)) kfree(qfprom_data) here > + return PTR_ERR(qfprom_cdata); > + > + mode = (qfprom_cdata[4] & MSM8976_CAL_SEL_MASK); > + dev_dbg(priv->dev, "calibration mode is %d\n", mode); > + > + switch (mode) { > + case TWO_PT_CALIB: > + base1 = (qfprom_cdata[2] & MSM8976_BASE1_MASK) >> MSM8976_BASE1_SHIFT; > + p2[0] = (qfprom_cdata[0] & MSM8976_S0_P2_MASK) >> MSM8976_S0_P2_SHIFT; > + p2[1] = (qfprom_cdata[0] & MSM8976_S1_P2_MASK) >> MSM8976_S1_P2_SHIFT; > + p2[2] = (qfprom_cdata[1] & MSM8976_S2_P2_MASK) >> MSM8976_S2_P2_SHIFT; > + p2[3] = (qfprom_cdata[1] & MSM8976_S3_P2_MASK) >> MSM8976_S3_P2_SHIFT; > + p2[4] = (qfprom_cdata[2] & MSM8976_S4_P2_MASK) >> MSM8976_S4_P2_SHIFT; > + p2[5] = (qfprom_cdata[2] & MSM8976_S5_P2_MASK) >> MSM8976_S5_P2_SHIFT; > + p2[6] = (qfprom_cdata[3] & MSM8976_S6_P2_MASK) >> MSM8976_S6_P2_SHIFT; > + p2[7] = (qfprom_cdata[3] & MSM8976_S7_P2_MASK) >> MSM8976_S7_P2_SHIFT; > + p2[8] = (qfprom_cdata[4] & MSM8976_S8_P2_MASK) >> MSM8976_S8_P2_SHIFT; > + p2[9] = (qfprom_cdata[4] & MSM8976_S9_P2_MASK) >> MSM8976_S9_P2_SHIFT; > + p2[10] = (qfprom_cdata[5] & MSM8976_S10_P2_MASK) >> MSM8976_S10_P2_SHIFT; > + > + for (i = 0; i < priv->num_sensors; i++) > + p2[i] = ((base1 + p2[i]) << 2); > + /* Fall through */ > + case ONE_PT_CALIB2: > + base0 = qfprom_cdata[0] & MSM8976_BASE0_MASK; > + p1[0] = (qfprom_cdata[0] & MSM8976_S0_P1_MASK) >> MSM8976_S0_P1_SHIFT; > + p1[1] = (qfprom_cdata[0] & MSM8976_S1_P1_MASK) >> MSM8976_S1_P1_SHIFT; > + p1[2] = (qfprom_cdata[1] & MSM8976_S2_P1_MASK) >> MSM8976_S2_P1_SHIFT; > + p1[3] = (qfprom_cdata[1] & MSM8976_S3_P1_MASK) >> MSM8976_S3_P1_SHIFT; > + p1[4] = (qfprom_cdata[2] & MSM8976_S4_P1_MASK) >> MSM8976_S4_P1_SHIFT; > + p1[5] = (qfprom_cdata[2] & MSM8976_S5_P1_MASK) >> MSM8976_S5_P1_SHIFT; > + p1[6] = (qfprom_cdata[3] & MSM8976_S6_P1_MASK) >> MSM8976_S6_P1_SHIFT; > + p1[7] = (qfprom_cdata[3] & MSM8976_S7_P1_MASK) >> MSM8976_S7_P1_SHIFT; > + p1[8] = (qfprom_cdata[4] & MSM8976_S8_P1_MASK) >> MSM8976_S8_P1_SHIFT; > + p1[9] = (qfprom_cdata[4] & MSM8976_S9_P1_MASK) >> MSM8976_S9_P1_SHIFT; > + p1[10] = (qfprom_cdata[4] & MSM8976_S10_P1_MASK) >> MSM8976_S10_P1_SHIFT; > + tmp = (qfprom_cdata[5] & MSM8976_S10_P1_MASK_1) << MSM8976_S10_P1_SHIFT_1; > + p1[10] |= tmp; > + > + for (i = 0; i < priv->num_sensors; i++) > + p1[i] = (((base0) + p1[i]) << 2); > + break; > + default: > + for (i = 0; i < priv->num_sensors; i++) { > + p1[i] = 500; > + p2[i] = 780; > + } > + break; > + } > + > + compute_intercept_slope_8976(priv, p1, p2, mode); > + kfree(qfprom_data) here > + return 0; > +} > + > +/* v1.x: msm8956,8976,qcs404,405 */ > > static const struct tsens_features tsens_v1_feat = { > .ver_major = VER_1_X, > @@ -191,3 +341,18 @@ const struct tsens_plat_data data_tsens_v1 = { > .feat = &tsens_v1_feat, > .fields = tsens_v1_regfields, > }; > + > +static const struct tsens_ops ops_8976 = { > + .init = init_common, > + .calibrate = calibrate_8976, > + .get_temp = get_temp_tsens_valid, > +}; > + > +/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */ > +const struct tsens_plat_data data_8976 = { > + .num_sensors = 11, > + .ops = &ops_8976, > + .hw_ids = (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10}, > + .feat = &tsens_v1_feat, > + .fields = tsens_v1_regfields, > +}; > diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c > index 0627d8615c30..24bb05e0eaf8 100644 > --- a/drivers/thermal/qcom/tsens.c > +++ b/drivers/thermal/qcom/tsens.c > @@ -60,6 +60,9 @@ static const struct of_device_id tsens_table[] = { > }, { > .compatible = "qcom,msm8974-tsens", > .data = &data_8974, > + }, { > + .compatible = "qcom,msm8976-tsens", > + .data = &data_8976, > }, { > .compatible = "qcom,msm8996-tsens", > .data = &data_8996, > diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h > index 2fd94997245b..8efec747bfcb 100644 > --- a/drivers/thermal/qcom/tsens.h > +++ b/drivers/thermal/qcom/tsens.h > @@ -323,7 +323,7 @@ extern const struct tsens_plat_data data_8960; > extern const struct tsens_plat_data data_8916, data_8974; > > /* TSENS v1 targets */ > -extern const struct tsens_plat_data data_tsens_v1; > +extern const struct tsens_plat_data data_tsens_v1, data_8976; > > /* TSENS v2 targets */ > extern const struct tsens_plat_data data_8996, data_tsens_v2; > -- > 2.21.0 >
On 02/10/2019 01:00, Amit Kucheria wrote: > On Tue, Oct 1, 2019 at 2:27 PM <kholk11@gmail.com> wrote: >> >> From: AngeloGioacchino Del Regno <kholk11@gmail.com> >> >> Add support for reading calibrated value from thermistors in >> MSM8956, MSM8976 and their APQ variants. >> >> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> >> --- [ ... ] >> -/* v1.x: qcs404,405 */ >> +static int calibrate_8976(struct tsens_priv *priv) >> +{ >> + int base0 = 0, base1 = 0, i; >> + u32 p1[11], p2[11]; >> + int mode = 0, tmp = 0; >> + u32 *qfprom_cdata; >> + >> + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); >> + if (IS_ERR(qfprom_cdata)) > > kfree(qfprom_data) here (Assuming s/qfprom_data/qfprom_cdata/) Where the allocation happen? [ ... ]
On Wed, Oct 2, 2019 at 8:57 AM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > > On 02/10/2019 01:00, Amit Kucheria wrote: > > On Tue, Oct 1, 2019 at 2:27 PM <kholk11@gmail.com> wrote: > >> > >> From: AngeloGioacchino Del Regno <kholk11@gmail.com> > >> > >> Add support for reading calibrated value from thermistors in > >> MSM8956, MSM8976 and their APQ variants. > >> > >> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> > >> --- > > [ ... ] > > >> -/* v1.x: qcs404,405 */ > >> +static int calibrate_8976(struct tsens_priv *priv) > >> +{ > >> + int base0 = 0, base1 = 0, i; > >> + u32 p1[11], p2[11]; > >> + int mode = 0, tmp = 0; > >> + u32 *qfprom_cdata; > >> + > >> + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); > >> + if (IS_ERR(qfprom_cdata)) > > > > kfree(qfprom_data) here > > (Assuming s/qfprom_data/qfprom_cdata/) > > Where the allocation happen? > nvmem_cell_read() call inside qfprom_read() /Amit
Il giorno gio 3 ott 2019 alle ore 16:02 Amit Kucheria <amit.kucheria@linaro.org> ha scritto: > > On Wed, Oct 2, 2019 at 8:57 AM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > > > > On 02/10/2019 01:00, Amit Kucheria wrote: > > > On Tue, Oct 1, 2019 at 2:27 PM <kholk11@gmail.com> wrote: > > >> > > >> From: AngeloGioacchino Del Regno <kholk11@gmail.com> > > >> > > >> Add support for reading calibrated value from thermistors in > > >> MSM8956, MSM8976 and their APQ variants. > > >> > > >> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> > > >> --- > > > > [ ... ] > > > > >> -/* v1.x: qcs404,405 */ > > >> +static int calibrate_8976(struct tsens_priv *priv) > > >> +{ > > >> + int base0 = 0, base1 = 0, i; > > >> + u32 p1[11], p2[11]; > > >> + int mode = 0, tmp = 0; > > >> + u32 *qfprom_cdata; > > >> + > > >> + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); > > >> + if (IS_ERR(qfprom_cdata)) > > > > > > kfree(qfprom_data) here > > > > (Assuming s/qfprom_data/qfprom_cdata/) > > > > Where the allocation happen? > > > > nvmem_cell_read() call inside qfprom_read() > > /Amit Thanks for the review. I will apply the suggested changes and resend ASAP.
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c index 10b595d4f619..04af13085eb5 100644 --- a/drivers/thermal/qcom/tsens-v1.c +++ b/drivers/thermal/qcom/tsens-v1.c @@ -18,6 +18,68 @@ #define TM_Sn_STATUS_OFF 0x0044 #define TM_TRDY_OFF 0x0084 +/* eeprom layout data for msm8956/76 (v1) */ +#define MSM8976_BASE0_MASK 0xff +#define MSM8976_BASE1_MASK 0xff +#define MSM8976_BASE1_SHIFT 8 + +#define MSM8976_S0_P1_MASK 0x3f00 +#define MSM8976_S1_P1_MASK 0x3f00000 +#define MSM8976_S2_P1_MASK 0x3f +#define MSM8976_S3_P1_MASK 0x3f000 +#define MSM8976_S4_P1_MASK 0x3f00 +#define MSM8976_S5_P1_MASK 0x3f00000 +#define MSM8976_S6_P1_MASK 0x3f +#define MSM8976_S7_P1_MASK 0x3f000 +#define MSM8976_S8_P1_MASK 0x1f8 +#define MSM8976_S9_P1_MASK 0x1f8000 +#define MSM8976_S10_P1_MASK 0xf8000000 +#define MSM8976_S10_P1_MASK_1 0x1 + +#define MSM8976_S0_P2_MASK 0xfc000 +#define MSM8976_S1_P2_MASK 0xfc000000 +#define MSM8976_S2_P2_MASK 0xfc0 +#define MSM8976_S3_P2_MASK 0xfc0000 +#define MSM8976_S4_P2_MASK 0xfc000 +#define MSM8976_S5_P2_MASK 0xfc000000 +#define MSM8976_S6_P2_MASK 0xfc0 +#define MSM8976_S7_P2_MASK 0xfc0000 +#define MSM8976_S8_P2_MASK 0x7e00 +#define MSM8976_S9_P2_MASK 0x7e00000 +#define MSM8976_S10_P2_MASK 0x7e + +#define MSM8976_S0_P1_SHIFT 8 +#define MSM8976_S1_P1_SHIFT 20 +#define MSM8976_S2_P1_SHIFT 0 +#define MSM8976_S3_P1_SHIFT 12 +#define MSM8976_S4_P1_SHIFT 8 +#define MSM8976_S5_P1_SHIFT 20 +#define MSM8976_S6_P1_SHIFT 0 +#define MSM8976_S7_P1_SHIFT 12 +#define MSM8976_S8_P1_SHIFT 3 +#define MSM8976_S9_P1_SHIFT 15 +#define MSM8976_S10_P1_SHIFT 27 +#define MSM8976_S10_P1_SHIFT_1 0 + +#define MSM8976_S0_P2_SHIFT 14 +#define MSM8976_S1_P2_SHIFT 26 +#define MSM8976_S2_P2_SHIFT 6 +#define MSM8976_S3_P2_SHIFT 18 +#define MSM8976_S4_P2_SHIFT 14 +#define MSM8976_S5_P2_SHIFT 26 +#define MSM8976_S6_P2_SHIFT 6 +#define MSM8976_S7_P2_SHIFT 18 +#define MSM8976_S8_P2_SHIFT 9 +#define MSM8976_S9_P2_SHIFT 21 +#define MSM8976_S10_P2_SHIFT 1 + +#define MSM8976_CAL_SEL_MASK 0x3 + +#define MSM8976_CAL_DEGC_PT1 30 +#define MSM8976_CAL_DEGC_PT2 120 +#define MSM8976_SLOPE_FACTOR 1000 +#define MSM8976_SLOPE_DEFAULT 3200 + /* eeprom layout data for qcs404/405 (v1) */ #define BASE0_MASK 0x000007f8 #define BASE1_MASK 0x0007f800 @@ -77,6 +139,30 @@ #define CAL_SEL_MASK 7 #define CAL_SEL_SHIFT 0 +static void compute_intercept_slope_8976(struct tsens_priv *priv, + u32 *p1, u32 *p2, u32 mode) +{ + int i; + + priv->sensor[0].slope = 3313; + priv->sensor[1].slope = 3275; + priv->sensor[2].slope = 3320; + priv->sensor[3].slope = 3246; + priv->sensor[4].slope = 3279; + priv->sensor[5].slope = 3257; + priv->sensor[6].slope = 3234; + priv->sensor[7].slope = 3269; + priv->sensor[8].slope = 3255; + priv->sensor[9].slope = 3239; + priv->sensor[10].slope = 3286; + + for (i = 0; i < priv->num_sensors; i++) { + priv->sensor[i].offset = (p1[i] * MSM8976_SLOPE_FACTOR) - + (MSM8976_CAL_DEGC_PT1 * + priv->sensor[i].slope); + } +} + static int calibrate_v1(struct tsens_priv *priv) { u32 base0 = 0, base1 = 0; @@ -142,7 +228,71 @@ static int calibrate_v1(struct tsens_priv *priv) return 0; } -/* v1.x: qcs404,405 */ +static int calibrate_8976(struct tsens_priv *priv) +{ + int base0 = 0, base1 = 0, i; + u32 p1[11], p2[11]; + int mode = 0, tmp = 0; + u32 *qfprom_cdata; + + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + mode = (qfprom_cdata[4] & MSM8976_CAL_SEL_MASK); + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (qfprom_cdata[2] & MSM8976_BASE1_MASK) >> MSM8976_BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & MSM8976_S0_P2_MASK) >> MSM8976_S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & MSM8976_S1_P2_MASK) >> MSM8976_S1_P2_SHIFT; + p2[2] = (qfprom_cdata[1] & MSM8976_S2_P2_MASK) >> MSM8976_S2_P2_SHIFT; + p2[3] = (qfprom_cdata[1] & MSM8976_S3_P2_MASK) >> MSM8976_S3_P2_SHIFT; + p2[4] = (qfprom_cdata[2] & MSM8976_S4_P2_MASK) >> MSM8976_S4_P2_SHIFT; + p2[5] = (qfprom_cdata[2] & MSM8976_S5_P2_MASK) >> MSM8976_S5_P2_SHIFT; + p2[6] = (qfprom_cdata[3] & MSM8976_S6_P2_MASK) >> MSM8976_S6_P2_SHIFT; + p2[7] = (qfprom_cdata[3] & MSM8976_S7_P2_MASK) >> MSM8976_S7_P2_SHIFT; + p2[8] = (qfprom_cdata[4] & MSM8976_S8_P2_MASK) >> MSM8976_S8_P2_SHIFT; + p2[9] = (qfprom_cdata[4] & MSM8976_S9_P2_MASK) >> MSM8976_S9_P2_SHIFT; + p2[10] = (qfprom_cdata[5] & MSM8976_S10_P2_MASK) >> MSM8976_S10_P2_SHIFT; + + for (i = 0; i < priv->num_sensors; i++) + p2[i] = ((base1 + p2[i]) << 2); + /* Fall through */ + case ONE_PT_CALIB2: + base0 = qfprom_cdata[0] & MSM8976_BASE0_MASK; + p1[0] = (qfprom_cdata[0] & MSM8976_S0_P1_MASK) >> MSM8976_S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & MSM8976_S1_P1_MASK) >> MSM8976_S1_P1_SHIFT; + p1[2] = (qfprom_cdata[1] & MSM8976_S2_P1_MASK) >> MSM8976_S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & MSM8976_S3_P1_MASK) >> MSM8976_S3_P1_SHIFT; + p1[4] = (qfprom_cdata[2] & MSM8976_S4_P1_MASK) >> MSM8976_S4_P1_SHIFT; + p1[5] = (qfprom_cdata[2] & MSM8976_S5_P1_MASK) >> MSM8976_S5_P1_SHIFT; + p1[6] = (qfprom_cdata[3] & MSM8976_S6_P1_MASK) >> MSM8976_S6_P1_SHIFT; + p1[7] = (qfprom_cdata[3] & MSM8976_S7_P1_MASK) >> MSM8976_S7_P1_SHIFT; + p1[8] = (qfprom_cdata[4] & MSM8976_S8_P1_MASK) >> MSM8976_S8_P1_SHIFT; + p1[9] = (qfprom_cdata[4] & MSM8976_S9_P1_MASK) >> MSM8976_S9_P1_SHIFT; + p1[10] = (qfprom_cdata[4] & MSM8976_S10_P1_MASK) >> MSM8976_S10_P1_SHIFT; + tmp = (qfprom_cdata[5] & MSM8976_S10_P1_MASK_1) << MSM8976_S10_P1_SHIFT_1; + p1[10] |= tmp; + + for (i = 0; i < priv->num_sensors; i++) + p1[i] = (((base0) + p1[i]) << 2); + break; + default: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope_8976(priv, p1, p2, mode); + + return 0; +} + +/* v1.x: msm8956,8976,qcs404,405 */ static const struct tsens_features tsens_v1_feat = { .ver_major = VER_1_X, @@ -191,3 +341,18 @@ const struct tsens_plat_data data_tsens_v1 = { .feat = &tsens_v1_feat, .fields = tsens_v1_regfields, }; + +static const struct tsens_ops ops_8976 = { + .init = init_common, + .calibrate = calibrate_8976, + .get_temp = get_temp_tsens_valid, +}; + +/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */ +const struct tsens_plat_data data_8976 = { + .num_sensors = 11, + .ops = &ops_8976, + .hw_ids = (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10}, + .feat = &tsens_v1_feat, + .fields = tsens_v1_regfields, +}; diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 0627d8615c30..24bb05e0eaf8 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -60,6 +60,9 @@ static const struct of_device_id tsens_table[] = { }, { .compatible = "qcom,msm8974-tsens", .data = &data_8974, + }, { + .compatible = "qcom,msm8976-tsens", + .data = &data_8976, }, { .compatible = "qcom,msm8996-tsens", .data = &data_8996, diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index 2fd94997245b..8efec747bfcb 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -323,7 +323,7 @@ extern const struct tsens_plat_data data_8960; extern const struct tsens_plat_data data_8916, data_8974; /* TSENS v1 targets */ -extern const struct tsens_plat_data data_tsens_v1; +extern const struct tsens_plat_data data_tsens_v1, data_8976; /* TSENS v2 targets */ extern const struct tsens_plat_data data_8996, data_tsens_v2;