| Message ID | 20191007014509.25180-4-masneyb@onstation.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/msm: external HDMI support for Nexus 5 phone | expand |
On Sun 06 Oct 18:45 PDT 2019, Brian Masney wrote: > pm8941 is missing the 5vs2 regulator node so let's add it since its > needed to get the external display working. This regulator was already > configured in the interrupts property on the parent node. > > Note that this regulator is referred to as mvs2 in the downstream MSM > kernel sources. > > Signed-off-by: Brian Masney <masneyb@onstation.org> > Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Picked this patch for now, once the driver updates are landed I will take the last two dts patches. Regards, Bjorn > --- > Changes since v1: > - None > > arch/arm/boot/dts/qcom-pm8941.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi > index f198480c8ef4..c1f2012d1c8b 100644 > --- a/arch/arm/boot/dts/qcom-pm8941.dtsi > +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi > @@ -178,6 +178,16 @@ > qcom,vs-soft-start-strength = <0>; > regulator-initial-mode = <1>; > }; > + > + pm8941_5vs2: 5vs2 { > + regulator-enable-ramp-delay = <1000>; > + regulator-pull-down; > + regulator-over-current-protection; > + qcom,ocp-max-retries = <10>; > + qcom,ocp-retry-delay = <30>; > + qcom,vs-soft-start-strength = <0>; > + regulator-initial-mode = <1>; > + }; > }; > }; > }; > -- > 2.21.0 >
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index f198480c8ef4..c1f2012d1c8b 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -178,6 +178,16 @@ qcom,vs-soft-start-strength = <0>; regulator-initial-mode = <1>; }; + + pm8941_5vs2: 5vs2 { + regulator-enable-ramp-delay = <1000>; + regulator-pull-down; + regulator-over-current-protection; + qcom,ocp-max-retries = <10>; + qcom,ocp-retry-delay = <30>; + qcom,vs-soft-start-strength = <0>; + regulator-initial-mode = <1>; + }; }; }; };