| Message ID | 20191020150746.64114-4-kholk11@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | MSM8976/56 Sony Xperia Loire (X/XCompact) smartphones | expand |
On Sun 20 Oct 08:07 PDT 2019, kholk11@gmail.com wrote: > From: AngeloGioacchino Del Regno <kholk11@gmail.com> > > The PM(I)8950 feature integrated peripherals like ADC, GPIO > controller, MPPs, PON keys and others. > Add them to DT files that will be imported on boards having > this PMIC combo (or one of them, anyways). > > Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com> > --- > arch/arm64/boot/dts/qcom/pm8950.dtsi | 187 ++++++++++++++++++++++++++ > arch/arm64/boot/dts/qcom/pmi8950.dtsi | 98 ++++++++++++++ > 2 files changed, 285 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/pm8950.dtsi > create mode 100644 arch/arm64/boot/dts/qcom/pmi8950.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi > new file mode 100644 > index 000000000000..c5041349bfe1 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi > @@ -0,0 +1,187 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com> > + > +#include <dt-bindings/iio/qcom,spmi-vadc.h> > +#include <dt-bindings/input/linux-event-codes.h> > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> > +#include <dt-bindings/spmi/spmi.h> > + > +&spmi_bus { > + pm8950_lsid0: pm8950@0 { > + compatible = "qcom,pm8950", "qcom,spmi-pmic"; > + reg = <0x0 SPMI_USID>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pm8950_gpios: gpio@c000 { > + compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio"; > + reg = <0xc000>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, > + <0 0xc1 0 IRQ_TYPE_NONE>, > + <0 0xc3 0 IRQ_TYPE_NONE>, > + <0 0xc4 0 IRQ_TYPE_NONE>, > + <0 0xc5 0 IRQ_TYPE_NONE>, > + <0 0xc6 0 IRQ_TYPE_NONE>, > + <0 0xc7 0 IRQ_TYPE_NONE>; > + }; > + > + pm8950_mpps: mpps@a000 { > + compatible = "qcom,pm8950-mpp", "qcom,spmi-mpp"; > + reg = <0xa000>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, > + <0 0xa1 0 IRQ_TYPE_NONE>, > + <0 0xa2 0 IRQ_TYPE_NONE>, > + <0 0xa3 0 IRQ_TYPE_NONE>; > + > + /* MPP_2: PA_THERM1 */ > + pa_therm { > + pm8950_mpp2_def: pa_therm1_default { > + pins = "mpp2"; > + function = "analog"; > + input-enable; > + qcom,amux-route = > + <PMIC_MPP_AMUX_ROUTE_CH6>; > + }; > + }; > + > + /* MPP_4: QUIET_THERM */ > + case_therm { > + pm8950_mpp4_def: case_therm_default { > + pins = "mpp4"; > + function = "analog"; > + input-enable; > + qcom,amux-route = > + <PMIC_MPP_AMUX_ROUTE_CH8>; > + }; > + }; > + }; > + > + pon@800 { > + compatible = "qcom,pm8916-pon"; > + reg = <0x0800>; > + mode-bootloader = <0x2>; > + mode-recovery = <0x1>; > + > + pwrkey { > + compatible = "qcom,pm8941-pwrkey"; > + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + linux,code = <KEY_POWER>; > + }; > + }; > + > + pm8950_temp: temp-alarm@2400 { > + compatible = "qcom,spmi-temp-alarm"; > + reg = <0x2400>; > + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; > + io-channels = <&pm8950_adc VADC_DIE_TEMP>; > + io-channel-names = "thermal"; > + #thermal-sensor-cells = <0>; > + }; > + > + pm8950_adc: adc@3100 { > + compatible = "qcom,spmi-vadc"; > + reg = <0x3100>; > + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; > + #address-cells = <1>; > + #size-cells = <0>; > + #io-channel-cells = <1>; > + > + vcoin { > + label = "vcoin"; > + reg = <VADC_VCOIN>; > + qcom,pre-scaling = <1 1>; > + }; > + vph_pwr { > + label = "vph_pwr"; > + reg = <VADC_VSYS>; > + qcom,pre-scaling = <1 1>; > + }; > + die_temp { > + label = "die_temp"; > + reg = <VADC_DIE_TEMP>; > + qcom,pre-scaling = <1 1>; > + }; > + ref_625mv { > + label = "ref_625mv"; > + reg = <VADC_REF_625MV>; > + qcom,pre-scaling = <1 1>; > + }; > + ref_1250v { > + label = "ref_1250v"; > + reg = <VADC_REF_1250MV>; > + qcom,pre-scaling = <1 1>; > + }; > + ref_buf_625mv { > + label = "ref_buf_625mv"; > + reg = <VADC_SPARE1>; > + qcom,pre-scaling = <1 1>; > + }; > + ref_gnd { > + reg = <VADC_GND_REF>; > + }; > + ref_vdd { > + reg = <VADC_VDD_VADC>; > + }; > + pa_therm0 { > + label = "pa_therm0"; > + reg = <VADC_LR_MUX7_HW_ID>; > + qcom,pre-scaling = <1 1>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + }; > + pa_therm1 { > + label = "pa_therm1"; > + reg = <VADC_P_MUX2_1_1>; > + qcom,pre-scaling = <1 1>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + }; > + xo_therm { > + label = "xo_therm"; > + reg = <VADC_LR_MUX3_XO_THERM>; > + qcom,pre-scaling = <1 1>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + }; > + xo_therm_buf { > + label = "xo_therm_buf"; > + reg = <VADC_LR_MUX3_BUF_XO_THERM>; > + qcom,pre-scaling = <1 1>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + }; > + case_therm { > + label = "case_therm"; > + reg = <VADC_P_MUX4_1_1>; > + qcom,pre-scaling = <1 1>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + }; > + }; > + > + rtc@6000 { > + compatible = "qcom,pm8941-rtc"; > + reg = <0x6000>; > + reg-names = "rtc", "alarm"; > + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; > + }; > + }; > + > + pm8950_1: pm8950@1 { > + compatible = "qcom,pm8950", "qcom,spmi-pmic"; > + reg = <0x1 SPMI_USID>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pm8950_spmi_regulators: regulators { > + compatible = "qcom,pm8950-regulators"; > + }; > + }; > +}; > diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi > new file mode 100644 > index 000000000000..15c3e47bab0c > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi > @@ -0,0 +1,98 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com> > + > +#include <dt-bindings/iio/qcom,spmi-vadc.h> > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/spmi/spmi.h> > + > +&spmi_bus { > + pmi8950_lsid0: pmic@2 { > + compatible = "qcom,pmi8950", "qcom,spmi-pmic"; > + reg = <0x2 SPMI_USID>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pmi8950_adc: adc@3100 { > + compatible = "qcom,spmi-vadc"; > + reg = <0x3100>; > + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; > + #address-cells = <1>; > + #size-cells = <0>; > + #io-channel-cells = <1>; > + > + usbin { > + label = "usbin"; > + reg = <VADC_USBIN>; > + qcom,pre-scaling = <1 4>; > + }; > + dcin { > + label = "dcin"; > + reg = <VADC_DCIN>; > + qcom,pre-scaling = <1 4>; > + }; > + vchg_sns { > + label = "vchg_sns"; > + reg = <VADC_VCHG_SNS>; > + qcom,pre-scaling = <1 1>; > + }; > + ref_625mv { > + label = "ref_625mv"; > + reg = <VADC_REF_625MV>; > + qcom,pre-scaling = <1 1>; > + }; > + ref_1250v { > + label = "ref_1250v"; > + reg = <VADC_REF_1250MV>; > + qcom,pre-scaling = <1 1>; > + }; > + ref_gnd { > + reg = <VADC_GND_REF>; > + }; > + ref_vdd { > + reg = <VADC_VDD_VADC>; > + }; > + chg_temp { > + label = "chg_temp"; > + reg = <VADC_SPARE2>; > + qcom,pre-scaling = <1 1>; > + }; > + usb_dp { > + label = "usb_dp"; > + reg = <VADC_USB_DP>; > + qcom,pre-scaling = <1 1>; > + }; > + usb_dm { > + label = "usb_dm"; > + reg = <VADC_USB_DM>; > + qcom,pre-scaling = <1 1>; > + }; > + }; > + > + pmi8950_gpio: gpios@c000 { Please sort nodes by unit address, then name. Apart from that, this looks good. Regards, Bjorn > + compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio"; > + reg = <0xc000>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, > + <0 0xc1 0 IRQ_TYPE_NONE>; > + }; > + > + pmi8950_mpp: mpps@a000 { > + compatible = "qcom,pmi8950-mpp", "qcom,spmi-mpp"; > + reg = <0xa000>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <0x2 0xa0 0 IRQ_TYPE_NONE>, > + <0x2 0xa1 0 IRQ_TYPE_NONE>, > + <0x2 0xa2 0 IRQ_TYPE_NONE>, > + <0x2 0xa3 0 IRQ_TYPE_NONE>; > + }; > + }; > + > + pmi8950_lsid1: pmic@3 { > + compatible = "qcom,pmi8950", "qcom,spmi-pmic"; > + reg = <0x3 SPMI_USID>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > +}; > -- > 2.21.0 >
diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi new file mode 100644 index 000000000000..c5041349bfe1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com> + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pm8950_lsid0: pm8950@0 { + compatible = "qcom,pm8950", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8950_gpios: gpio@c000 { + compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>; + }; + + pm8950_mpps: mpps@a000 { + compatible = "qcom,pm8950-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>; + + /* MPP_2: PA_THERM1 */ + pa_therm { + pm8950_mpp2_def: pa_therm1_default { + pins = "mpp2"; + function = "analog"; + input-enable; + qcom,amux-route = + <PMIC_MPP_AMUX_ROUTE_CH6>; + }; + }; + + /* MPP_4: QUIET_THERM */ + case_therm { + pm8950_mpp4_def: case_therm_default { + pins = "mpp4"; + function = "analog"; + input-enable; + qcom,amux-route = + <PMIC_MPP_AMUX_ROUTE_CH8>; + }; + }; + }; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + + pm8950_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8950_adc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8950_adc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + vcoin { + label = "vcoin"; + reg = <VADC_VCOIN>; + qcom,pre-scaling = <1 1>; + }; + vph_pwr { + label = "vph_pwr"; + reg = <VADC_VSYS>; + qcom,pre-scaling = <1 1>; + }; + die_temp { + label = "die_temp"; + reg = <VADC_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + }; + ref_625mv { + label = "ref_625mv"; + reg = <VADC_REF_625MV>; + qcom,pre-scaling = <1 1>; + }; + ref_1250v { + label = "ref_1250v"; + reg = <VADC_REF_1250MV>; + qcom,pre-scaling = <1 1>; + }; + ref_buf_625mv { + label = "ref_buf_625mv"; + reg = <VADC_SPARE1>; + qcom,pre-scaling = <1 1>; + }; + ref_gnd { + reg = <VADC_GND_REF>; + }; + ref_vdd { + reg = <VADC_VDD_VADC>; + }; + pa_therm0 { + label = "pa_therm0"; + reg = <VADC_LR_MUX7_HW_ID>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + pa_therm1 { + label = "pa_therm1"; + reg = <VADC_P_MUX2_1_1>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + xo_therm { + label = "xo_therm"; + reg = <VADC_LR_MUX3_XO_THERM>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + xo_therm_buf { + label = "xo_therm_buf"; + reg = <VADC_LR_MUX3_BUF_XO_THERM>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + case_therm { + label = "case_therm"; + reg = <VADC_P_MUX4_1_1>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + }; + }; + + pm8950_1: pm8950@1 { + compatible = "qcom,pm8950", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8950_spmi_regulators: regulators { + compatible = "qcom,pm8950-regulators"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi new file mode 100644 index 000000000000..15c3e47bab0c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com> + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmi8950_lsid0: pmic@2 { + compatible = "qcom,pmi8950", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi8950_adc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + usbin { + label = "usbin"; + reg = <VADC_USBIN>; + qcom,pre-scaling = <1 4>; + }; + dcin { + label = "dcin"; + reg = <VADC_DCIN>; + qcom,pre-scaling = <1 4>; + }; + vchg_sns { + label = "vchg_sns"; + reg = <VADC_VCHG_SNS>; + qcom,pre-scaling = <1 1>; + }; + ref_625mv { + label = "ref_625mv"; + reg = <VADC_REF_625MV>; + qcom,pre-scaling = <1 1>; + }; + ref_1250v { + label = "ref_1250v"; + reg = <VADC_REF_1250MV>; + qcom,pre-scaling = <1 1>; + }; + ref_gnd { + reg = <VADC_GND_REF>; + }; + ref_vdd { + reg = <VADC_VDD_VADC>; + }; + chg_temp { + label = "chg_temp"; + reg = <VADC_SPARE2>; + qcom,pre-scaling = <1 1>; + }; + usb_dp { + label = "usb_dp"; + reg = <VADC_USB_DP>; + qcom,pre-scaling = <1 1>; + }; + usb_dm { + label = "usb_dm"; + reg = <VADC_USB_DM>; + qcom,pre-scaling = <1 1>; + }; + }; + + pmi8950_gpio: gpios@c000 { + compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>; + }; + + pmi8950_mpp: mpps@a000 { + compatible = "qcom,pmi8950-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0x2 0xa0 0 IRQ_TYPE_NONE>, + <0x2 0xa1 0 IRQ_TYPE_NONE>, + <0x2 0xa2 0 IRQ_TYPE_NONE>, + <0x2 0xa3 0 IRQ_TYPE_NONE>; + }; + }; + + pmi8950_lsid1: pmic@3 { + compatible = "qcom,pmi8950", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +};