[10/11] arm64: dts: qcom: db820c: Use regulator names from schematics

Message ID	20191021051322.297560-11-bjorn.andersson@linaro.org (mailing list archive)
State	New, archived
Headers	show Return-Path: <SRS0=J3WE=YO=vger.kernel.org=linux-arm-msm-owner@kernel.org> From: Bjorn Andersson <bjorn.andersson@linaro.org> To: Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 10/11] arm64: dts: qcom: db820c: Use regulator names from schematics Date: Sun, 20 Oct 2019 22:13:21 -0700 Message-Id: <20191021051322.297560-11-bjorn.andersson@linaro.org> In-Reply-To: <20191021051322.297560-1-bjorn.andersson@linaro.org> References: <20191021051322.297560-1-bjorn.andersson@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk
Series	arm64: dts: qcom: msm8996: Introduce IFC6640 \| expand [00/11] arm64: dts: qcom: msm8996: Introduce IFC6640 [01/11] arm64: dts: qcom: db820c: Move non-soc entries out of /soc [02/11] arm64: dts: qcom: msm8996: Use node references in db820c [03/11] arm64: dts: qcom: msm8996: Move regulator consumers to db820c [04/11] arm64: dts: qcom: msm8996: Move regulators to db820c [05/11] arm64: dts: qcom: db820c: Group root nodes [06/11] arm64: dts: qcom: db820c: Sort all nodes [07/11] arm64: dts: qcom: db820c: Remove pin specific files [08/11] arm64: dts: qcom: msm8996: Pad addresses [10/11] arm64: dts: qcom: db820c: Use regulator names from schematics [11/11] arm64: dts: qcom: msm8996: Introduce IFC6640

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 6c64deecf950..20d5561cf3e5 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -107,6 +107,26 @@ pinctrl-0 = <&usb3_vbus_det_gpio>; }; + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s8a_l3a_input: vreg-s8a-l3a-input { + compatible = "regulator-fixed"; + regulator-name = "vreg_s8a_l3a_input"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <0>; + regulator-max-microvolt = <0>; + }; + wlan_en: wlan-en-1-8v { pinctrl-names = "default"; pinctrl-0 = <&wlan_en_gpios>; @@ -187,7 +207,7 @@ }; &camss { - vdda-supply = <&pm8994_l2>; + vdda-supply = <&vreg_l2a_1p25>; }; &hdmi { @@ -197,30 +217,30 @@ pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; - core-vdda-supply = <&pm8994_l12>; - core-vcc-supply = <&pm8994_s4>; + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; }; &hdmi_phy { status = "okay"; - vddio-supply = <&pm8994_l12>; - vcca-supply = <&pm8994_l28>; + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; #phy-cells = <0>; }; &hsusb_phy1 { status = "okay"; - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; }; &hsusb_phy2 { status = "okay"; - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; }; &mdp { @@ -493,26 +513,26 @@ status = "okay"; perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&wlan_en>; - vdda-supply = <&pm8994_l28>; + vdda-supply = <&vreg_l28a_0p925>; }; &pcie1 { status = "okay"; perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; - vdda-supply = <&pm8994_l28>; + vdda-supply = <&vreg_l28a_0p925>; }; &pcie2 { status = "okay"; perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; - vdda-supply = <&pm8994_l28>; + vdda-supply = <&vreg_l28a_0p925>; }; &pcie_phy { status = "okay"; - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; }; &pm8994_gpios { @@ -656,16 +676,35 @@ pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; - vdd_l1-supply = <&pm8994_s3>; - vdd_l2_l26_l28-supply = <&pm8994_s3>; - vdd_l3_l11-supply = <&pm8994_s3>; - vdd_l4_l27_l31-supply = <&pm8994_s3>; - vdd_l5_l7-supply = <&pm8994_s5>; - vdd_l14_l15-supply = <&pm8994_s5>; - vdd_l20_l21-supply = <&pm8994_s5>; - vdd_l25-supply = <&pm8994_s3>; - - pm8994_s3: s3 { + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s8a_l3a_input>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; }; @@ -674,137 +713,197 @@ * 1.8v required on LS expansion * for mezzanine boards */ - pm8994_s4: s4 { + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - pm8994_s5: s5 { + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; regulator-min-microvolt = <2150000>; regulator-max-microvolt = <2150000>; }; - pm8994_s7: s7 { + vreg_s7a_1p0: s7 { + regulator-name = "vreg_s7a_1p0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; }; - pm8994_l1: l1 { + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; - pm8994_l2: l2 { + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <1250000>; }; - pm8994_l3: l3 { + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <850000>; }; - pm8994_l4: l4 { + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; }; - pm8994_l6: l6 { + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - pm8994_l8: l8 { + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm8994_l9: l9 { + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm8994_l10: l10 { + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm8994_l11: l11 { + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1150000>; }; - pm8994_l12: l12 { + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm8994_l13: l13 { + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2950000>; }; - pm8994_l14: l14 { + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm8994_l15: l15 { + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm8994_l16: l16 { + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2700000>; }; - pm8994_l17: l17 { + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; }; - pm8994_l18: l18 { + vreg_l18a_2p85: l18 { + regulator-name = "vreg_l18a_2p85"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2900000>; }; - pm8994_l19: l19 { + vreg_l19a_2p8: l19 { + regulator-name = "vreg_l19a_2p8"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; - pm8994_l20: l20 { + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; regulator-allow-set-load; }; - pm8994_l21: l21 { + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; regulator-allow-set-load; regulator-system-load = <200000>; }; - pm8994_l22: l22 { + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - pm8994_l23: l23 { + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - pm8994_l24: l24 { + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; regulator-min-microvolt = <3075000>; regulator-max-microvolt = <3075000>; }; - pm8994_l25: l25 { + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-allow-set-load; }; - pm8994_l27: l27 { + vreg_l26a_0p8: l27 { + regulator-name = "vreg_l26a_0p8"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; - pm8994_l28: l28 { + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; regulator-min-microvolt = <925000>; regulator-max-microvolt = <925000>; regulator-allow-set-load; }; - pm8994_l29: l29 { + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - pm8994_l30: l30 { + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm8994_l32: l32 { + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + + vreg_lvs1a_1p8: lvs1 { + regulator-name = "vreg_lvs1a_1p8"; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-name = "vreg_lvs2a_1p8"; + }; + }; + + pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + vph_pwr_bbyp: bst-byp { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; }; }; @@ -814,8 +913,8 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; cd-gpios = <&msmgpio 38 0x1>; - vmmc-supply = <&pm8994_l21>; - vqmmc-supply = <&pm8994_l13>; + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; status = "okay"; }; @@ -908,13 +1007,13 @@ &ufsphy { status = "okay"; - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; vdda-phy-max-microamp = <18380>; vdda-pll-max-microamp = <9440>; - vddp-ref-clk-supply = <&pm8994_l25>; + vddp-ref-clk-supply = <&vreg_l25a_1p2>; vddp-ref-clk-max-microamp = <100>; vddp-ref-clk-always-on; }; @@ -922,9 +1021,9 @@ &ufshc { status = "okay"; - vcc-supply = <&pm8994_l20>; - vccq-supply = <&pm8994_l25>; - vccq2-supply = <&pm8994_s4>; + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; vcc-max-microamp = <600000>; vccq-max-microamp = <450000>; @@ -955,8 +1054,8 @@ &usb3phy { status = "okay"; - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; }; @@ -965,9 +1064,9 @@ clocks = <&div1_mclk>, <&rpmcc RPM_SMD_BB_CLK1>; - vdd-buck-supply = <&pm8994_s4>; - vdd-buck-sido-supply = <&pm8994_s4>; - vdd-tx-supply = <&pm8994_s4>; - vdd-rx-supply = <&pm8994_s4>; - vdd-io-supply = <&pm8994_s4>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; };

[10/11] arm64: dts: qcom: db820c: Use regulator names from schematics

Commit Message

Patch