[04/11] arm64: dts: qcom: msm8996: Move regulators to db820c

Message ID	20191021051322.297560-5-bjorn.andersson@linaro.org (mailing list archive)
State	New, archived
Headers	show Return-Path: <SRS0=J3WE=YO=vger.kernel.org=linux-arm-msm-owner@kernel.org> From: Bjorn Andersson <bjorn.andersson@linaro.org> To: Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 04/11] arm64: dts: qcom: msm8996: Move regulators to db820c Date: Sun, 20 Oct 2019 22:13:15 -0700 Message-Id: <20191021051322.297560-5-bjorn.andersson@linaro.org> In-Reply-To: <20191021051322.297560-1-bjorn.andersson@linaro.org> References: <20191021051322.297560-1-bjorn.andersson@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk
Series	arm64: dts: qcom: msm8996: Introduce IFC6640 \| expand [00/11] arm64: dts: qcom: msm8996: Introduce IFC6640 [01/11] arm64: dts: qcom: db820c: Move non-soc entries out of /soc [02/11] arm64: dts: qcom: msm8996: Use node references in db820c [03/11] arm64: dts: qcom: msm8996: Move regulator consumers to db820c [04/11] arm64: dts: qcom: msm8996: Move regulators to db820c [05/11] arm64: dts: qcom: db820c: Group root nodes [06/11] arm64: dts: qcom: db820c: Sort all nodes [07/11] arm64: dts: qcom: db820c: Remove pin specific files [08/11] arm64: dts: qcom: msm8996: Pad addresses [10/11] arm64: dts: qcom: db820c: Use regulator names from schematics [11/11] arm64: dts: qcom: msm8996: Introduce IFC6640

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 21e029afb27b..fc6273b0215d 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -513,163 +513,165 @@ gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; }; }; +}; - rpm-glink { - rpm_requests { - pm8994-regulators { - vdd_l1-supply = <&pm8994_s3>; - vdd_l2_l26_l28-supply = <&pm8994_s3>; - vdd_l3_l11-supply = <&pm8994_s3>; - vdd_l4_l27_l31-supply = <&pm8994_s3>; - vdd_l5_l7-supply = <&pm8994_s5>; - vdd_l14_l15-supply = <&pm8994_s5>; - vdd_l20_l21-supply = <&pm8994_s5>; - vdd_l25-supply = <&pm8994_s3>; - - s3 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - s5 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - s7 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - - l1 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - l2 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - }; - l3 { - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - }; - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - l6 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l11 { - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - }; - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - l17 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2900000>; - }; - l19 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - }; - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - l22 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - l25 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-allow-set-load; - }; - l27 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - l28 { - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <925000>; - regulator-allow-set-load; - }; - l29 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - l30 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l32 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_l1-supply = <&pm8994_s3>; + vdd_l2_l26_l28-supply = <&pm8994_s3>; + vdd_l3_l11-supply = <&pm8994_s3>; + vdd_l4_l27_l31-supply = <&pm8994_s3>; + vdd_l5_l7-supply = <&pm8994_s5>; + vdd_l14_l15-supply = <&pm8994_s5>; + vdd_l20_l21-supply = <&pm8994_s5>; + vdd_l25-supply = <&pm8994_s3>; + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + pm8994_s7: s7 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + pm8994_l3: l3 { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8994_l6: l6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8994_l11: l11 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8994_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + pm8994_l17: l17 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + pm8994_l18: l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + pm8994_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + pm8994_l22: l22 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + pm8994_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + pm8994_l25: l25 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + pm8994_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + pm8994_l28: l28 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + pm8994_l29: l29 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + pm8994_l30: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; }; +}; +/ { usb2_id: usb2-id { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index a297d3223161..48b5981d01b0 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -467,7 +467,7 @@ mboxes = <&apcs_glb 0>; - rpm_requests { + rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; @@ -509,57 +509,6 @@ }; }; }; - - pm8994-regulators { - compatible = "qcom,rpm-pm8994-regulators"; - - pm8994_s1: s1 {}; - pm8994_s2: s2 {}; - pm8994_s3: s3 {}; - pm8994_s4: s4 {}; - pm8994_s5: s5 {}; - pm8994_s6: s6 {}; - pm8994_s7: s7 {}; - pm8994_s8: s8 {}; - pm8994_s9: s9 {}; - pm8994_s10: s10 {}; - pm8994_s11: s11 {}; - pm8994_s12: s12 {}; - - pm8994_l1: l1 {}; - pm8994_l2: l2 {}; - pm8994_l3: l3 {}; - pm8994_l4: l4 {}; - pm8994_l5: l5 {}; - pm8994_l6: l6 {}; - pm8994_l7: l7 {}; - pm8994_l8: l8 {}; - pm8994_l9: l9 {}; - pm8994_l10: l10 {}; - pm8994_l11: l11 {}; - pm8994_l12: l12 {}; - pm8994_l13: l13 {}; - pm8994_l14: l14 {}; - pm8994_l15: l15 {}; - pm8994_l16: l16 {}; - pm8994_l17: l17 {}; - pm8994_l18: l18 {}; - pm8994_l19: l19 {}; - pm8994_l20: l20 {}; - pm8994_l21: l21 {}; - pm8994_l22: l22 {}; - pm8994_l23: l23 {}; - pm8994_l24: l24 {}; - pm8994_l25: l25 {}; - pm8994_l26: l26 {}; - pm8994_l27: l27 {}; - pm8994_l28: l28 {}; - pm8994_l29: l29 {}; - pm8994_l30: l30 {}; - pm8994_l31: l31 {}; - pm8994_l32: l32 {}; - }; - }; };

[04/11] arm64: dts: qcom: msm8996: Move regulators to db820c

Commit Message

Patch