diff mbox series

[06/11] arm64: dts: qcom: db820c: Sort all nodes

Message ID 20191021051322.297560-7-bjorn.andersson@linaro.org (mailing list archive)
State New, archived
Headers show
Series arm64: dts: qcom: msm8996: Introduce IFC6640 | expand

Commit Message

Bjorn Andersson Oct. 21, 2019, 5:13 a.m. UTC
Sort all nodes in db820c.dtsi based on address, then name.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 336 +++++++++----------
 1 file changed, 168 insertions(+), 168 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index aed34a461b19..99990a139938 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -124,6 +124,18 @@ 
 	};
 };
 
+&blsp1_i2c2 {
+	/* On Low speed expansion */
+	label = "LS-I2C0";
+	status = "okay";
+};
+
+&blsp1_spi0 {
+	/* On Low speed expansion */
+	label = "LS-SPI0";
+	status = "okay";
+};
+
 &blsp1_uart1 {
 	label = "BT-UART";
 	status = "okay";
@@ -141,6 +153,24 @@ 
 	};
 };
 
+&blsp2_i2c0 {
+	/* On High speed expansion */
+	label = "HS-I2C2";
+	status = "okay";
+};
+
+&blsp2_i2c1 {
+	/* On Low speed expansion */
+	label = "LS-I2C1";
+	status = "okay";
+};
+
+&blsp2_spi5 {
+	/* On High speed expansion */
+	label = "HS-SPI1";
+	status = "okay";
+};
+
 &blsp2_uart1 {
 	label = "LS-UART1";
 	status = "okay";
@@ -157,75 +187,49 @@ 
 	pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
 };
 
-&blsp1_i2c2 {
-	/* On Low speed expansion */
-	label = "LS-I2C0";
-	status = "okay";
+&camss {
+	vdda-supply = <&pm8994_l2>;
 };
 
-&blsp2_i2c1 {
-	/* On Low speed expansion */
-	label = "LS-I2C1";
+&hdmi {
 	status = "okay";
-};
 
-&blsp1_spi0 {
-	/* On Low speed expansion */
-	label = "LS-SPI0";
-	status = "okay";
-};
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+	pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
 
-&blsp2_i2c0 {
-	/* On High speed expansion */
-	label = "HS-I2C2";
-	status = "okay";
+	core-vdda-supply = <&pm8994_l12>;
+	core-vcc-supply = <&pm8994_s4>;
 };
 
-&blsp2_spi5 {
-	/* On High speed expansion */
-	label = "HS-SPI1";
+&hdmi_phy {
 	status = "okay";
-};
 
-&camss {
-	vdda-supply = <&pm8994_l2>;
+	vddio-supply = <&pm8994_l12>;
+	vcca-supply = <&pm8994_l28>;
+	#phy-cells = <0>;
 };
 
-&sdhc2 {
-	/* External SD card */
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
-	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
-	cd-gpios = <&msmgpio 38 0x1>;
-	vmmc-supply = <&pm8994_l21>;
-	vqmmc-supply = <&pm8994_l13>;
+&hsusb_phy1 {
 	status = "okay";
+
+	vdda-pll-supply = <&pm8994_l12>;
+	vdda-phy-dpdm-supply = <&pm8994_l24>;
 };
 
-&ufsphy {
+&hsusb_phy2 {
 	status = "okay";
 
-	vdda-phy-supply = <&pm8994_l28>;
 	vdda-pll-supply = <&pm8994_l12>;
-
-	vdda-phy-max-microamp = <18380>;
-	vdda-pll-max-microamp = <9440>;
-
-	vddp-ref-clk-supply = <&pm8994_l25>;
-	vddp-ref-clk-max-microamp = <100>;
-	vddp-ref-clk-always-on;
+	vdda-phy-dpdm-supply = <&pm8994_l24>;
 };
 
-&ufshc {
+&mdp {
 	status = "okay";
+};
 
-	vcc-supply = <&pm8994_l20>;
-	vccq-supply = <&pm8994_l25>;
-	vccq2-supply = <&pm8994_s4>;
-
-	vcc-max-microamp = <600000>;
-	vccq-max-microamp = <450000>;
-	vccq2-max-microamp = <450000>;
+&mdss {
+	status = "okay";
 };
 
 &msmgpio {
@@ -382,6 +386,32 @@ 
 		"NC"; /* GPIO_149 */
 };
 
+&pcie0 {
+	status = "okay";
+	perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&pm8994_l28>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&pm8994_l28>;
+};
+
+&pcie2 {
+	status = "okay";
+	perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&pm8994_l28>;
+};
+
+&pcie_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&pm8994_l28>;
+	vdda-pll-supply = <&pm8994_l12>;
+};
+
 &pm8994_gpios {
 	gpio-line-names =
 		"NC",
@@ -434,114 +464,6 @@ 
 		"NC";
 };
 
-&pcie_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&pm8994_l28>;
-	vdda-pll-supply = <&pm8994_l12>;
-};
-
-&usb3phy {
-	status = "okay";
-
-	vdda-phy-supply = <&pm8994_l28>;
-	vdda-pll-supply = <&pm8994_l12>;
-
-};
-
-&hsusb_phy1 {
-	status = "okay";
-
-	vdda-pll-supply = <&pm8994_l12>;
-	vdda-phy-dpdm-supply = <&pm8994_l24>;
-};
-
-&hsusb_phy2 {
-	status = "okay";
-
-	vdda-pll-supply = <&pm8994_l12>;
-	vdda-phy-dpdm-supply = <&pm8994_l24>;
-};
-
-&usb3 {
-	status = "okay";
-	extcon = <&usb3_id>;
-
-	dwc3@6a00000 {
-		extcon = <&usb3_id>;
-		dr_mode = "otg";
-	};
-};
-
-&usb2 {
-	status = "okay";
-	extcon = <&usb2_id>;
-
-	dwc3@7600000 {
-		extcon = <&usb2_id>;
-		dr_mode = "otg";
-		maximum-speed = "high-speed";
-	};
-};
-
-&pcie0 {
-	status = "okay";
-	perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
-	vddpe-3v3-supply = <&wlan_en>;
-	vdda-supply = <&pm8994_l28>;
-};
-
-&pcie1 {
-	status = "okay";
-	perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
-	vdda-supply = <&pm8994_l28>;
-};
-
-&pcie2 {
-	status = "okay";
-	perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
-	vdda-supply = <&pm8994_l28>;
-};
-
-&wcd9335 {
-	clock-names = "mclk", "slimbus";
-	clocks = <&div1_mclk>,
-		 <&rpmcc RPM_SMD_BB_CLK1>;
-
-	vdd-buck-supply = <&pm8994_s4>;
-	vdd-buck-sido-supply = <&pm8994_s4>;
-	vdd-tx-supply = <&pm8994_s4>;
-	vdd-rx-supply = <&pm8994_s4>;
-	vdd-io-supply = <&pm8994_s4>;
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdp {
-	status = "okay";
-};
-
-&hdmi_phy {
-	status = "okay";
-
-	vddio-supply = <&pm8994_l12>;
-	vcca-supply = <&pm8994_l28>;
-	#phy-cells = <0>;
-};
-
-&hdmi {
-	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
-	pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
-
-	core-vdda-supply = <&pm8994_l12>;
-	core-vcc-supply = <&pm8994_s4>;
-};
-
 &rpm_requests {
 	pm8994-regulators {
 		compatible = "qcom,rpm-pm8994-regulators";
@@ -698,18 +620,15 @@ 
 	};
 };
 
-&spmi_bus {
-	pmic@0 {
-		pon@800 {
-			resin {
-				compatible = "qcom,pm8941-resin";
-				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				linux,code = <KEY_VOLUMEDOWN>;
-			};
-		};
-	};
+&sdhc2 {
+	/* External SD card */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+	cd-gpios = <&msmgpio 38 0x1>;
+	vmmc-supply = <&pm8994_l21>;
+	vqmmc-supply = <&pm8994_l13>;
+	status = "okay";
 };
 
 &sound {
@@ -783,3 +702,84 @@ 
 		};
 	};
 };
+
+&spmi_bus {
+	pmic@0 {
+		pon@800 {
+			resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_VOLUMEDOWN>;
+			};
+		};
+	};
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&pm8994_l28>;
+	vdda-pll-supply = <&pm8994_l12>;
+
+	vdda-phy-max-microamp = <18380>;
+	vdda-pll-max-microamp = <9440>;
+
+	vddp-ref-clk-supply = <&pm8994_l25>;
+	vddp-ref-clk-max-microamp = <100>;
+	vddp-ref-clk-always-on;
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&pm8994_l20>;
+	vccq-supply = <&pm8994_l25>;
+	vccq2-supply = <&pm8994_s4>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+};
+
+&usb2 {
+	status = "okay";
+	extcon = <&usb2_id>;
+
+	dwc3@7600000 {
+		extcon = <&usb2_id>;
+		dr_mode = "otg";
+		maximum-speed = "high-speed";
+	};
+};
+
+&usb3 {
+	status = "okay";
+	extcon = <&usb3_id>;
+
+	dwc3@6a00000 {
+		extcon = <&usb3_id>;
+		dr_mode = "otg";
+	};
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&pm8994_l28>;
+	vdda-pll-supply = <&pm8994_l12>;
+
+};
+
+&wcd9335 {
+	clock-names = "mclk", "slimbus";
+	clocks = <&div1_mclk>,
+		 <&rpmcc RPM_SMD_BB_CLK1>;
+
+	vdd-buck-supply = <&pm8994_s4>;
+	vdd-buck-sido-supply = <&pm8994_s4>;
+	vdd-tx-supply = <&pm8994_s4>;
+	vdd-rx-supply = <&pm8994_s4>;
+	vdd-io-supply = <&pm8994_s4>;
+};