@@ -1077,6 +1077,13 @@ config REGULATOR_VEXPRESS
This driver provides support for voltage regulators available
on the ARM Ltd's Versatile Express platform.
+config REGULATOR_VQMMC_IPQ4019
+ tristate "IPQ4019 VQMMC SD LDO regulator support"
+ depends on ARCH_QCOM
+ help
+ This driver provides support for the VQMMC LDO I/0
+ voltage regulator of the IPQ4019 SD/EMMC controller.
+
config REGULATOR_WM831X
tristate "Wolfson Microelectronics WM831x PMIC regulators"
depends on MFD_WM831X
@@ -132,6 +132,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o
obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
+obj-$(CONFIG_REGULATOR_VQMMC_IPQ4019) += vqmmc-ipq4019-regulator.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
new file mode 100644
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2019 Mantas Pucka <mantas@8devices.com>
+// Copyright (c) 2019 Robert Marko <robert.marko@sartura.hr>
+//
+// Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+static const unsigned int ipq4019_vmmc_voltages[] = {
+ 1500000, 1800000, 2500000, 3000000,
+};
+
+static struct regulator_ops ipq4019_regulator_voltage_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static struct regulator_desc vmmc_regulator = {
+ .name = "vmmcq",
+ .ops = &ipq4019_regulator_voltage_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .volt_table = ipq4019_vmmc_voltages,
+ .n_voltages = ARRAY_SIZE(ipq4019_vmmc_voltages),
+ .vsel_reg = 0,
+ .vsel_mask = 0x3,
+};
+
+const struct regmap_config ipq4019_vmmcq_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+};
+
+static int ipq4019_regulator_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regulator_init_data *init_data;
+ struct regulator_config cfg = {};
+ struct regulator_dev *rdev;
+ struct resource *res;
+ struct regmap *rmap;
+ void __iomem *base;
+
+ init_data = of_get_regulator_init_data(dev, dev->of_node,
+ &vmmc_regulator);
+ if (!init_data)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config);
+ if (IS_ERR(rmap))
+ return PTR_ERR(rmap);
+
+ cfg.dev = dev;
+ cfg.init_data = init_data;
+ cfg.of_node = dev->of_node;
+ cfg.regmap = rmap;
+
+ rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg);
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "Failed to register regulator: %ld\n",
+ PTR_ERR(rdev));
+ return PTR_ERR(rdev);
+ }
+ platform_set_drvdata(pdev, rdev);
+
+ return 0;
+}
+
+static int ipq4019_regulator_remove(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+ regulator_unregister(rdev);
+
+ return 0;
+}
+
+static const struct of_device_id regulator_ipq4019_of_match[] = {
+ { .compatible = "qcom,vqmmc-ipq4019-regulator", },
+ {},
+};
+
+static struct platform_driver ipq4019_regulator_driver = {
+ .probe = ipq4019_regulator_probe,
+ .remove = ipq4019_regulator_remove,
+ .driver = {
+ .name = "vqmmc-ipq4019-regulator",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(regulator_ipq4019_of_match),
+ },
+};
+module_platform_driver(ipq4019_regulator_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mantas Pucka <mantas@8devices.com>");
+MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator");