| Message ID | 20200415081159.1098-1-stephan@gerhold.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names | expand |
On 15/04/2020 09:11, Stephan Gerhold wrote: > Change the listed examples to use more generic node names, representing > the class of the device nodes: > > - apr-service@<id> > - dai@<id> > > Both names are already in use in arch/arm64/boot/dts/qcom/sdm845.dtsi. > > Also add #address-cells + #size-cells to the q6asm example, > without them the example produces dtc warnings. > > Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > .../devicetree/bindings/sound/qcom,q6adm.txt | 2 +- > .../devicetree/bindings/sound/qcom,q6afe.txt | 46 +++++++++---------- > .../devicetree/bindings/sound/qcom,q6asm.txt | 7 ++- > .../devicetree/bindings/sound/qcom,q6core.txt | 2 +- > 4 files changed, 30 insertions(+), 27 deletions(-) > > diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt > index bbae426cdfb1..15c353a20de8 100644 > --- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt > +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt > @@ -29,7 +29,7 @@ used by the apr service device. > Definition: Must be 0 > > = EXAMPLE > -q6adm@8 { > +apr-service@8 { > compatible = "qcom,q6adm"; > reg = <APR_SVC_ADM>; > q6routing: routing { > diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt > index d74888b9f1bb..4916dd6a0896 100644 > --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt > +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt > @@ -100,7 +100,7 @@ configuration of each dai. Must contain the following properties. > > = EXAMPLE > > -q6afe@4 { > +apr-service@4 { > compatible = "qcom,q6afe"; > reg = <APR_SVC_AFE>; > > @@ -110,12 +110,12 @@ q6afe@4 { > #address-cells = <1>; > #size-cells = <0>; > > - hdmi@1 { > - reg = <1>; > + dai@1 { > + reg = <HDMI_RX>; > }; > > - tdm@24 { > - reg = <24>; > + dai@24 { > + reg = <PRIMARY_TDM_RX_0>; > qcom,tdm-sync-mode = <1>: > qcom,tdm-sync-src = <1>; > qcom,tdm-data-out = <0>; > @@ -125,8 +125,8 @@ q6afe@4 { > > }; > > - tdm@25 { > - reg = <25>; > + dai@25 { > + reg = <PRIMARY_TDM_TX_0>; > qcom,tdm-sync-mode = <1>: > qcom,tdm-sync-src = <1>; > qcom,tdm-data-out = <0>; > @@ -135,43 +135,43 @@ q6afe@4 { > qcom,tdm-data-align = <0>; > }; > > - prim-mi2s-rx@16 { > - reg = <16>; > + dai@16 { > + reg = <PRIMARY_MI2S_RX>; > qcom,sd-lines = <0 2>; > }; > > - prim-mi2s-tx@17 { > - reg = <17>; > + dai@17 { > + reg = <PRIMARY_MI2S_TX>; > qcom,sd-lines = <1>; > }; > > - sec-mi2s-rx@18 { > - reg = <18>; > + dai@18 { > + reg = <SECONDARY_MI2S_RX>; > qcom,sd-lines = <0 3>; > }; > > - sec-mi2s-tx@19 { > - reg = <19>; > + dai@19 { > + reg = <SECONDARY_MI2S_TX>; > qcom,sd-lines = <1>; > }; > > - tert-mi2s-rx@20 { > - reg = <20>; > + dai@20 { > + reg = <TERTIARY_MI2S_RX>; > qcom,sd-lines = <1 3>; > }; > > - tert-mi2s-tx@21 { > - reg = <21>; > + dai@21 { > + reg = <TERTIARY_MI2S_TX>; > qcom,sd-lines = <0>; > }; > > - quat-mi2s-rx@22 { > - reg = <22>; > + dai@22 { > + reg = <QUATERNARY_MI2S_RX>; > qcom,sd-lines = <0>; > }; > > - quat-mi2s-tx@23 { > - reg = <23>; > + dai@23 { > + reg = <QUATERNARY_MI2S_TX>; > qcom,sd-lines = <1>; > }; > }; > diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt > index 9f5378c51686..6b9a88d0ea3f 100644 > --- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt > +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt > @@ -51,13 +51,16 @@ configuration of each dai. Must contain the following properties. > > = EXAMPLE > > -q6asm@7 { > +apr-service@7 { > compatible = "qcom,q6asm"; > reg = <APR_SVC_ASM>; > q6asmdai: dais { > compatible = "qcom,q6asm-dais"; > + #address-cells = <1>; > + #size-cells = <0>; > #sound-dai-cells = <1>; > - mm@0 { > + > + dai@0 { > reg = <0>; > direction = <2>; > is-compress-dai; > diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt > index 7f36ff8bec18..5cd4cc9b1fde 100644 > --- a/Documentation/devicetree/bindings/sound/qcom,q6core.txt > +++ b/Documentation/devicetree/bindings/sound/qcom,q6core.txt > @@ -15,7 +15,7 @@ used by the apr service device. > example "qcom,q6core-v2.0" > > = EXAMPLE > -q6core@3 { > +apr-service@3 { > compatible = "qcom,q6core"; > reg = <APR_SVC_ADSP_CORE>; > }; >
On Wed, 15 Apr 2020 10:11:58 +0200, Stephan Gerhold wrote: > Change the listed examples to use more generic node names, representing > the class of the device nodes: > > - apr-service@<id> > - dai@<id> > > Both names are already in use in arch/arm64/boot/dts/qcom/sdm845.dtsi. > > [...] Applied, thanks! [1/2] ASoC: qdsp6: Suggest more generic node names commit: 35c638d039bbabbca7affb52960d468951d811c1 [2/2] dt-bindings: soc: qcom: apr: Use generic node names for APR services (not applied) All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt index bbae426cdfb1..15c353a20de8 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt @@ -29,7 +29,7 @@ used by the apr service device. Definition: Must be 0 = EXAMPLE -q6adm@8 { +apr-service@8 { compatible = "qcom,q6adm"; reg = <APR_SVC_ADM>; q6routing: routing { diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt index d74888b9f1bb..4916dd6a0896 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt @@ -100,7 +100,7 @@ configuration of each dai. Must contain the following properties. = EXAMPLE -q6afe@4 { +apr-service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; @@ -110,12 +110,12 @@ q6afe@4 { #address-cells = <1>; #size-cells = <0>; - hdmi@1 { - reg = <1>; + dai@1 { + reg = <HDMI_RX>; }; - tdm@24 { - reg = <24>; + dai@24 { + reg = <PRIMARY_TDM_RX_0>; qcom,tdm-sync-mode = <1>: qcom,tdm-sync-src = <1>; qcom,tdm-data-out = <0>; @@ -125,8 +125,8 @@ q6afe@4 { }; - tdm@25 { - reg = <25>; + dai@25 { + reg = <PRIMARY_TDM_TX_0>; qcom,tdm-sync-mode = <1>: qcom,tdm-sync-src = <1>; qcom,tdm-data-out = <0>; @@ -135,43 +135,43 @@ q6afe@4 { qcom,tdm-data-align = <0>; }; - prim-mi2s-rx@16 { - reg = <16>; + dai@16 { + reg = <PRIMARY_MI2S_RX>; qcom,sd-lines = <0 2>; }; - prim-mi2s-tx@17 { - reg = <17>; + dai@17 { + reg = <PRIMARY_MI2S_TX>; qcom,sd-lines = <1>; }; - sec-mi2s-rx@18 { - reg = <18>; + dai@18 { + reg = <SECONDARY_MI2S_RX>; qcom,sd-lines = <0 3>; }; - sec-mi2s-tx@19 { - reg = <19>; + dai@19 { + reg = <SECONDARY_MI2S_TX>; qcom,sd-lines = <1>; }; - tert-mi2s-rx@20 { - reg = <20>; + dai@20 { + reg = <TERTIARY_MI2S_RX>; qcom,sd-lines = <1 3>; }; - tert-mi2s-tx@21 { - reg = <21>; + dai@21 { + reg = <TERTIARY_MI2S_TX>; qcom,sd-lines = <0>; }; - quat-mi2s-rx@22 { - reg = <22>; + dai@22 { + reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0>; }; - quat-mi2s-tx@23 { - reg = <23>; + dai@23 { + reg = <QUATERNARY_MI2S_TX>; qcom,sd-lines = <1>; }; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt index 9f5378c51686..6b9a88d0ea3f 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt @@ -51,13 +51,16 @@ configuration of each dai. Must contain the following properties. = EXAMPLE -q6asm@7 { +apr-service@7 { compatible = "qcom,q6asm"; reg = <APR_SVC_ASM>; q6asmdai: dais { compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; #sound-dai-cells = <1>; - mm@0 { + + dai@0 { reg = <0>; direction = <2>; is-compress-dai; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt index 7f36ff8bec18..5cd4cc9b1fde 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6core.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6core.txt @@ -15,7 +15,7 @@ used by the apr service device. example "qcom,q6core-v2.0" = EXAMPLE -q6core@3 { +apr-service@3 { compatible = "qcom,q6core"; reg = <APR_SVC_ADSP_CORE>; };
Change the listed examples to use more generic node names, representing the class of the device nodes: - apr-service@<id> - dai@<id> Both names are already in use in arch/arm64/boot/dts/qcom/sdm845.dtsi. Also add #address-cells + #size-cells to the q6asm example, without them the example produces dtc warnings. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- .../devicetree/bindings/sound/qcom,q6adm.txt | 2 +- .../devicetree/bindings/sound/qcom,q6afe.txt | 46 +++++++++---------- .../devicetree/bindings/sound/qcom,q6asm.txt | 7 ++- .../devicetree/bindings/sound/qcom,q6core.txt | 2 +- 4 files changed, 30 insertions(+), 27 deletions(-)