From patchwork Sun May 3 20:18:24 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Robert Marko X-Patchwork-Id: 11524743 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id DBAEC139A for ; Sun, 3 May 2020 20:18:52 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id C439920752 for ; Sun, 3 May 2020 20:18:52 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=sartura-hr.20150623.gappssmtp.com header.i=@sartura-hr.20150623.gappssmtp.com header.b="qK4+PH8g" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729134AbgECUSv (ORCPT ); Sun, 3 May 2020 16:18:51 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52560 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729126AbgECUSs (ORCPT ); Sun, 3 May 2020 16:18:48 -0400 Received: from mail-wm1-x343.google.com (mail-wm1-x343.google.com [IPv6:2a00:1450:4864:20::343]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8928FC061A10 for ; Sun, 3 May 2020 13:18:48 -0700 (PDT) Received: by mail-wm1-x343.google.com with SMTP id y24so6485848wma.4 for ; Sun, 03 May 2020 13:18:48 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sartura-hr.20150623.gappssmtp.com; s=20150623; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=tb3r3LLHiDvQU/geLRLcXEdsYq1xx71bVzm8FyyX0qk=; b=qK4+PH8gAuxxYW6vY+QwqkLlzXnoZZDmmEC2OHGNWzXcHTiNqdr5nIoawbibHaJeI/ X5cYWxqYUxbh6d+fBMgY1XTVyDx9jknb8H3M1cg+WDkG44qSjSQC1a1IFe4ODH9Mzwqz Nj1QioFnZnDVPVP6JMmHMZqAtRDJaX9nMd+xEdI0fkfl0ZyvKG61gi/z6YhcGfIx8bdC TP+BzD9PdmtD3Z3J3Y3NGuMWmqNjhDL3fSpf6Ko2P76ND3RLAfSv3cM8Ut/ZblR1czuF HhYYImgi7MJq1LBkrLDsOdAN9STfEJS5NQR1qQgIgHzV0sP5hZu3JHQMdI4gA5r7xkdu 2ixQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=tb3r3LLHiDvQU/geLRLcXEdsYq1xx71bVzm8FyyX0qk=; b=e7vR3DIO2mLqyGyWEXsN63McRYaCKqFMb5T8/Q8RDVeeVYQ8m9T+BleuS3Bz8r+ofE B4nstgv8j6/udj3+zMEHso6p/C9Gu5srIdT8wKExDuc+6yLEir0ft503fGbgvPgSJpj/ yDwfVWUU0G5jHKeaXxE0v/TIvBIxYvwj84lBx+m9TqBDCaZJb4wMaYPac0eDQMloJtqb 8Y42i45J4Zb+CgWfNG7Hfit5baZiMhNYPt6vKb7ewD8KCF3iehJEVeimooutjQH31qmT q+/olv5AXTVUYergrQyLbWARVpBS2AzwkFCrPuEPsoRpDGG+OEai5wVnfBloFAd7k+T5 LWEA== X-Gm-Message-State: AGi0PuYIwgGrNghjqMorOw8hGwTw2Fbce82qpJWxh8QwB9HL9Klao7n+ Tx2KLjs8miVO1NA3Yk1oZ5JLlhdsWHs+SQ== X-Google-Smtp-Source: APiQypL/T037e5y4XoEbr/sP2JQyNPPRlgUEcRstSaCZZ4+hQ1VKBypsZNmHZNa3WInjxXp4ZtAwOA== X-Received: by 2002:a05:600c:224a:: with SMTP id a10mr11270741wmm.174.1588537127283; Sun, 03 May 2020 13:18:47 -0700 (PDT) Received: from localhost.localdomain ([2a0e:b107:830:0:47e5:c676:4796:5818]) by smtp.googlemail.com with ESMTPSA id 19sm9891624wmo.3.2020.05.03.13.18.46 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 03 May 2020 13:18:46 -0700 (PDT) From: Robert Marko To: agross@kernel.org, bjorn.andersson@linaro.org, kishon@ti.com, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, vkoul@kernel.org Cc: John Crispin , Robert Marko , Luka Perkov Subject: [PATCH v7 3/3] ARM: dts: qcom: ipq4019: add USB devicetree nodes Date: Sun, 3 May 2020 22:18:24 +0200 Message-Id: <20200503201823.531757-3-robert.marko@sartura.hr> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200503201823.531757-1-robert.marko@sartura.hr> References: <20200503201823.531757-1-robert.marko@sartura.hr> MIME-Version: 1.0 Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: John Crispin Since we now have driver for the USB PHY, lets add the necessary nodes to DTSI. Signed-off-by: John Crispin Signed-off-by: Robert Marko Cc: Luka Perkov Reviewed-by: Vinod Koul --- Changes from v6 to v7: * Remove changes to qcom-ipq4019-ap.dk01.1.dtsi It has slipped in unwanted, we only want to add nodes to the DTSI. arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index bfa9ce4c6e69..ee45253361cb 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -604,5 +604,79 @@ reg = <4>; }; }; + + usb3_ss_phy: ssphy@9a000 { + compatible = "qcom,usb-ss-ipq4019-phy"; + #phy-cells = <0>; + reg = <0x9a000 0x800>; + reg-names = "phy_base"; + resets = <&gcc USB3_UNIPHY_PHY_ARES>; + reset-names = "por_rst"; + status = "disabled"; + }; + + usb3_hs_phy: hsphy@a6000 { + compatible = "qcom,usb-hs-ipq4019-phy"; + #phy-cells = <0>; + reg = <0xa6000 0x40>; + reg-names = "phy_base"; + resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + status = "disabled"; + }; + + usb3@8af8800 { + compatible = "qcom,dwc3"; + reg = <0x8af8800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc GCC_USB3_MASTER_CLK>, + <&gcc GCC_USB3_SLEEP_CLK>, + <&gcc GCC_USB3_MOCK_UTMI_CLK>; + clock-names = "master", "sleep", "mock_utmi"; + ranges; + status = "disabled"; + + dwc3@8a00000 { + compatible = "snps,dwc3"; + reg = <0x8a00000 0xf8000>; + interrupts = ; + phys = <&usb3_hs_phy>, <&usb3_ss_phy>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + }; + }; + + usb2_hs_phy: hsphy@a8000 { + compatible = "qcom,usb-hs-ipq4019-phy"; + #phy-cells = <0>; + reg = <0xa8000 0x40>; + reg-names = "phy_base"; + resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + status = "disabled"; + }; + + usb2@60f8800 { + compatible = "qcom,dwc3"; + reg = <0x60f8800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc GCC_USB2_MASTER_CLK>, + <&gcc GCC_USB2_SLEEP_CLK>, + <&gcc GCC_USB2_MOCK_UTMI_CLK>; + clock-names = "master", "sleep", "mock_utmi"; + ranges; + status = "disabled"; + + dwc3@6000000 { + compatible = "snps,dwc3"; + reg = <0x6000000 0xf8000>; + interrupts = ; + phys = <&usb2_hs_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + }; + }; }; };