| Message ID | 20200617134515.25229-1-georgi.djakov@linaro.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 366c37978eb842dc1142dd4f9ae7774891db5e0d |
| Headers | show |
| Series | arm64: dts: msm8916: Add interconnect provider DT nodes | expand |
Hi Georgi, On Wed, Jun 17, 2020 at 04:45:15PM +0300, Georgi Djakov wrote: > Add nodes for the network-on-chip interconnect buses present on > MSM8916-based platforms. > > Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Thanks for resending this patch! I tested this recently: it seems to probe fine and request the related clocks; without interconnect consumers nothing is different otherwise (as expected). FWIW: Tested-by: Stephan Gerhold <stephan@gerhold.net> > --- > arch/arm64/boot/dts/qcom/msm8916.dtsi | 28 +++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi > index 32bd140ac9fd..6c57896d9836 100644 > --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi > @@ -4,6 +4,7 @@ > */ > > #include <dt-bindings/arm/coresight-cti-dt.h> > +#include <dt-bindings/interconnect/qcom,msm8916.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/clock/qcom,gcc-msm8916.h> > #include <dt-bindings/reset/qcom,gcc-msm8916.h> > @@ -406,11 +407,38 @@ soc: soc { > ranges = <0 0 0 0xffffffff>; > compatible = "simple-bus"; > > + bimc: interconnect@400000 { > + compatible = "qcom,msm8916-bimc"; > + reg = <0x00400000 0x62000>; > + #interconnect-cells = <1>; > + clock-names = "bus", "bus_a"; > + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, > + <&rpmcc RPM_SMD_BIMC_A_CLK>; > + }; > + > restart@4ab000 { > compatible = "qcom,pshold"; > reg = <0x4ab000 0x4>; > }; > > + pcnoc: interconnect@500000 { > + compatible = "qcom,msm8916-pcnoc"; > + reg = <0x00500000 0x11000>; > + #interconnect-cells = <1>; > + clock-names = "bus", "bus_a"; > + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, > + <&rpmcc RPM_SMD_PCNOC_A_CLK>; > + }; > + > + snoc: interconnect@580000 { > + compatible = "qcom,msm8916-snoc"; > + reg = <0x00580000 0x14000>; > + #interconnect-cells = <1>; > + clock-names = "bus", "bus_a"; > + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, > + <&rpmcc RPM_SMD_SNOC_A_CLK>; > + }; > + > msmgpio: pinctrl@1000000 { > compatible = "qcom,msm8916-pinctrl"; > reg = <0x1000000 0x300000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 32bd140ac9fd..6c57896d9836 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/arm/coresight-cti-dt.h> +#include <dt-bindings/interconnect/qcom,msm8916.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8916.h> #include <dt-bindings/reset/qcom,gcc-msm8916.h> @@ -406,11 +407,38 @@ soc: soc { ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; + bimc: interconnect@400000 { + compatible = "qcom,msm8916-bimc"; + reg = <0x00400000 0x62000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + restart@4ab000 { compatible = "qcom,pshold"; reg = <0x4ab000 0x4>; }; + pcnoc: interconnect@500000 { + compatible = "qcom,msm8916-pcnoc"; + reg = <0x00500000 0x11000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + compatible = "qcom,msm8916-snoc"; + reg = <0x00580000 0x14000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + msmgpio: pinctrl@1000000 { compatible = "qcom,msm8916-pinctrl"; reg = <0x1000000 0x300000>;
Add nodes for the network-on-chip interconnect buses present on MSM8916-based platforms. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 28 +++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)